Smart capsules that release their contents at a selected temperature

Feb 02, 2010
Example showing a capsule releasing its contents into the external environment after heating. From left to right: 1. Capsule below the oil melting temperature; the oil is solid. 2. Capsule above the oil melting temperature: the shell ruptures. 3. Shell fracture propagation, with oil coming out. 4. Empty capsule after complete release of its contents. Scale bar = 20 µm.

How can an active principle be delivered in a controlled way? Until now, there was no obvious answer to this question.

Now however, French researchers at the CNRS Paul Pascal Research Center in Bordeaux have designed smart capsules that are able to release their contents on demand, simply by raising the temperature. Described in an article published on 2 February 2010 in the journal Langmuir, this novel system has just been patented. It opens up the way to many applications in a large number of fields such as food, perfumes and agriculture, for instance to deliver above a specific temperature.

In order to deliver an encapsulated substance, such as a therapeutic agent in medicine, silica substrates are often used. Release then takes place via the pores in the silica or by dissolution of the latter, but this occurs in an uncontrolled, or practically uncontrolled, manner. To overcome this major disadvantage, three researchers from the Paul Pascal Research Center, one of CNRS's own units, have developed an ingenious and totally novel method: capsules that can release their contents on demand, under the effect of heating.

The idea is simple, and the system is easy to produce. The scientists disperse oil, which can contain a specific agent, in water. Stabilized in the form of by silica particles, the emulsion's distinctive characteristic is that it is made up of oil that is liquid at the production temperature (65 °C), but solid at ambient temperature. A silica shell is then polymerized around the cooled droplets, and stable capsules that can be stored are obtained. It is then possible to trigger the release of the contents of the capsules by warming them to above the of the selected oil. The transition from the to the leads to expansion of the confined oil, which is enough to break the silica shell.

Any release temperature between 35°C and 56°C can easily be selected by choosing the appropriate oil or by mixing several types of oil. This temperature corresponds to the melting temperature of the oil or of the mixture of oils. Another parameter can be adjusted: the way in which the contents are released, either as strings of droplets, or all at once, which enables the rate of release of the contents to be controlled.

Procedure used to generate the capsules. (1) dispersion of particles, (2) emulsification under heat of a crystallizable oil, (3) cooling of the emulsion at ambient temperature, (4) silica shell mineralization around the droplets.

The principle is very simple, cheap, and applicable to a very large number of systems. The method could for instance be used to control freshness of foods or to release a perfume into the air, onto fabric or onto skin. Another possibility is the release of a therapeutic agent onto the skin, which in this case could be triggered locally by rubbing when it is applied (rubbing would cause warming). Another example would be the release of a bactericide when the reaches that at which bacteria proliferate in air ducts. There are a great number of possible applications, and the researchers are already busy designing double emulsion systems that could be used to extend the technique to multitherapy.

Explore further: New material could enable new facial reconstruction treatment

More information: Thermo-stimulabled wax@SiO2 core shell particles. Mathieu Destribats, Véronique Schmitt et Rénal Backov. Langmuir. 2 February 2010

add to favorites email to friend print save as pdf

Related Stories

Emulsion with a round-trip ticket

Jun 14, 2007

Oil and water are not miscible. However, it is possible to combine both into an emulsion in which they act as a unit—for example, in creams, body lotion, milk, or mayonnaise. In these substances, one of the two liquids ...

Microcapsules open in tumor cells

Aug 23, 2006

Medicines are most helpful when they directly affect the diseased organs or cells - for example, tumour cells. Scientists at the Max Planck Institute of Colloids and Interfaces in Potsdam, Germany, and Ludwig-Maximilian-University ...

Putting the fuel in fuel cells

Sep 12, 2006

Ammonia borane holds promise as a chemical compound to store and release hydrogen in fuel cell-powered vehicles – and it appears stable enough to offset some safety concerns. These findings were presented by Pacific Northwest ...

Simple way to remove oil from water

Aug 05, 2005

Australian researchers say they have devised a simple tank-and-siphon system for removing oil from oily water to protect the environment.

Recommended for you

Characterizing an important reactive intermediate

15 hours ago

An international group of researchers led by Dr. Warren E. Piers (University of Calgary) and Dr. Heikki M. Tuononen (University of Jyväskylä) has been able to isolate and characterize an important chemical ...

Surfaces that communicate in bio-chemical Braille

15 hours ago

A Braille-like method that enables medical implants to communicate with a patient's cells could help reduce biomedical and prosthetic device failure rates, according to University of Sydney researchers.

New material steals oxygen from the air

Sep 30, 2014

Researchers from the University of Southern Denmark have synthesized crystalline materials that can bind and store oxygen in high concentrations. Just one spoon of the substance is enough to absorb all the ...

User comments : 0