Running electronics using light

Oct 19, 2009 By Miranda Marquit feature
Conventional printed circuit board.

(PhysOrg.com) -- "If you open up almost any electronic gadget, you will see various elements that operating using electric circuitries," Nader Engheta tells PhysOrg.com. "Many of them have different functionalities, such as inductors, capacitors, resistors, transistors, and so forth. These well-known elements have been around for decades. But what if you could bring these concepts to the nanoscale, and what if they could operate with light instead of electricity?"

Engheta, a scientist at the University of Pennsylvania, along with Andrea Alů, believe that it is possible to create a circuit board that has the potential to be useful in communications. Engheta and Alů describe their concept of an optical nanoscale circuit in : "All-Optical Metamaterial Circuit Board at the Nanoscale."

"If you go to the nanoscale," Engheta explains, "you would have to conceive of that effectively act like the elements seen in current devices. It would be necessary to create nanoparticles of a specific shape, and made from specific materials, that would allow them to act as capacitors, resistors, and other well-known elements."

There are three main advantages of using optical nanoparticle , Engheta says. First of all, being able to further miniaturize various communications devices would ensure that technology continues to evolve. “We are moving toward having more and more information compacted into a smaller volume.” The second advantage is that using optical frequencies would provide more bandwidth. Finally, there is a very real possibility that nanoscale circuit boards, properly constructed, would use less energy. “We have to look more into this possibility, but it is quite likely that optical nanoparticle circuit boards would be low energy in nature,” Engheta insists.

So far, Engheta and Alů have only used computer simulations to test their ideas related to nanoscale circuit boards. The Engheta group is, however, working toward an experimental realization of their theories with a proof of concept for lumped circuit elements. “What we’ve come up with is compatible with the nanofabrication techniques already in use today,” Engheta says. “We are in the midst of trying to construct some nanowires to serve as our proof of concept for lumped optical circuit elements, and hopefully we’ll see some results in the next six months or so.”

One of the biggest challenges to realizing this type of nanoscale circuitry is that it is difficult to form the structures needed at such a small size. “Additionally,” Engheta admits, “we would have to put these structures next to each other in specific patterns. This is doable, using present nanofabrication techniques, but not easy.” The fabrication process would include creating structures out of and a process that imitates the electronic circuitry we are more familiar with. “One of our ideas is to cut a groove in the material, one that could contain the light used in the circuit board, to connect nanoparticles together. It would be similar to the way wires connect various elements in electronic devices.”

Once a proof of concept is realized for this circuit board, Engheta hopes to take optical nanocommunications to another level. “We are extending our concept to other elements that are non-linear,” he says. “This could allow us to develop switches, opening the door to computation.”

More information: Andrea Alů and Nader Engheta, “All Optical Metamaterial Circuit Board at the Nanoscale,” Physical Review Letters (2009). Available online: link.aps.org/doi/10.1103/PhysRevLett.103.143902

Copyright 2009 PhysOrg.com.
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part without the express written permission of PhysOrg.com.

Explore further: Chemically driven micro- and nanomotors

add to favorites email to friend print save as pdf

Related Stories

Penn Theorists to Create Optical Circuit Elements

Sep 27, 2005

Engineers at the University of Pennsylvania have theorized a means of shrinking electronics so they could be run using light instead of electricity. In the search to create faster, smaller and more energy-efficient electronics, ...

Chinese develop e-waste technology

Feb 15, 2007

Chinese scientists say they have developed a recycling and recovery technology designed especially for disposal of printed circuit boards.

Steampipe keeps electronics cool

Dec 04, 2008

(PhysOrg.com) -- The cooling of electronic components is playing an increasing role in the design process of electronic equipment such as mobile telephones, games computers and laptops. Wessel Wits, PhD student ...

Water acts as a 'light switch' on photonic circuits

Dec 04, 2006

Using water to “write” light, scientists have designed a photonic circuit inside a photonic crystal that combines several optical elements. As the optical equivalent of an electronic circuit, this design ...

Recommended for you

Chemically driven micro- and nanomotors

22 hours ago

At least since the movie "The Fantastic Voyage" in 1966, in which a submarine is shrunk down and injected into the blood stream of a human, people have been toying with the idea of sending tiny "micromachines" ...

Pyramid nanoscale antennas beam light up and down

23 hours ago

Researchers from FOM Institute AMOLF and Philips Research have designed and fabricated a new type of nanoscale antenna. The new antennas look like pyramids, rather than the more commonly used straight pillars. ...

User comments : 1

Adjust slider to filter visible comments by rank

Display comments: newest first

grgfraiser
not rated yet Oct 19, 2009
I wonder if that BrightenUp pov tech can be used like this, it is an optical switch, on and off, or 0 and 1, just like a transistor, or am i way off on this?

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.