Design tool for materials with a memory

Jul 13, 2009
This is a simulation of the forceps for medical endoscopy: the colors of the almost closed forceps represent the given forces (high pressure: red, no pressure: blue). Credit: Fraunhofer IWM

Shape memory alloys can "remember" a condition. If they are deformed, a temperature change can be enough to bring them back to their original shape. A simulation calculates the characteristics of these materials.

It seems like a magic trick. A man takes a paper clip and bends it in such a way that it merely resembles a crooked piece of wire. Then, he throws the clip into a bowl of hot water. Within a fraction of a second, the metal wire returns to the shape of a paper clip. This phenomenon is called the shape memory effect. It can be observed in certain metallic alloys, known as shape memory alloys. These kinds of materials are ideal for many applications. For instance, in aerospace technologies: solar sails can unfold in outer space thanks to shape memory alloys. The medical sciences, too, rely on their characteristics. One example is cardiology: stents are small tube-shaped, metal grid frameworks. They are folded together and inserted into where they expand and prevent the vessels from becoming blocked.

However, it is a long road towards achieving a fully developed product. The characteristics of shape memory alloys are complex and therefore difficult to predict. Engineers must produce many prototypes before they achieve a fully operational component with the desired characteristics. Researchers at the Fraunhofer Institute for Mechanics of Materials IWM have found a quicker way to reach their goal: "The numerical simulation which we have developed already answers many questions upfront, long before a prototype exists," explains IWM project manager Dr. Dirk Helm.

With the help of these simulations, the scientists have developed various objects, including a minuscule forceps for endoscopy. Normally, such micro forceps can only be created with joints. How can a component be produced that has such small dimensions, is elastic, can be thoroughly sterilized and has no joints? The computer supplies the answer: with the help of numerical simulation models, the researchers could calculate in advance the most important characteristics of the component, such as its strength and clamping force, and efficiently develop and manufacture the elastic component. "Normally, many tests with various prototypes would need to be conducted," Dr. Helm explains. "By using simulations, we can avoid producing most of these prototypes. This saves costs because the raw materials for the shape memory alloys are very expensive and are sometimes difficult to work with." In addition, the researchers can estimate through simulations how durable the modern materials are.

Source: Fraunhofer-Gesellschaft (news : web)

Explore further: Amputee puts limb system through its paces

add to favorites email to friend print save as pdf

Related Stories

Precision control of movement in robots

May 16, 2008

A research team from the Department of Electricity and Electronics at the University of the Basque Country’s Faculty of Science and Technology in Leioa, Spain, led by Victor Etxebarria, is investigating the characteristics ...

Metal Foam Has a Good Memory

Dec 18, 2007

In the world of commercial materials, lighter and cheaper is usually better, especially when those attributes are coupled with superior strength and special properties, such as a material's ability to remember ...

Smart Miniature Pump

May 06, 2008

Medicines sometimes have to be administered in extremely small quantities. Just a few tenths of a milliliter may be sufficient to give the patient the ideal treatment. Micro-pumps greatly facilitate the dosage ...

Discovery might improve titanium alloys

Oct 20, 2005

Two University of Maryland scientists say they've developed a modification of titanium alloys that will expand their uses and make them safer.

Hybrid welding process developed

Dec 18, 2006

U.S. scientists say they've developed a hybrid process involving the use of a laser in friction-stir welding to extend the application to more materials.

Recommended for you

First drone in Nevada test program crashes in demo

9 hours ago

A drone testing program in Nevada is off to a bumpy start after the first unmanned aircraft authorized to fly without Federal Aviation Administration supervision crashed during a ceremony in Boulder City.

Fully automated: Thousands of blood samples every hour

16 hours ago

Siemens is supplying automation technology for the longest and one of the most cutting-edge sample processing lines in any clinical laboratory. The line, or automation track, 200 meters long, in Marlborough, ...

Explainer: What is 4-D printing?

17 hours ago

Additive manufacturing – or 3D printing – is 30 years old this year. Today, it's found not just in industry but in households, as the price of 3D printers has fallen below US$1,000. Knowing you can p ...

First series production vehicle with software control

17 hours ago

Siemens has unveiled the first electric series production vehicle with the central electronics and software architecture RACE. This technology, developed in the research project of the same name, replaces ...

Amputee puts limb system through its paces

19 hours ago

"Amputee Makes History with APL's Modular Prosthetic Limb" is the headline from Johns Hopkins Applied Physics Laboratory, where a team working on prosthetics observed a milestone when a double amputee showed ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.