Long, Stretchy Carbon Nanotubes Could Make Space Elevators Possible

Jan 23, 2009 by Lisa Zyga weblog
A space elevator would extend 22,000 miles above the Earth to a station, and then another 40,000 miles to a weighted structure for stability.

(PhysOrg.com) -- Scientists from Cambridge University have developed a light, flexible, and strong type of carbon nanotube material that may bring space elevators closer to reality. Motivated by a $4 million prize from NASA, the scientists found a way to combine multiple separate nanotubes together to form long strands. Until now, carbon nanotubes have been too brittle to be formed into such long pieces.

And a space elevator - if it ever becomes reality - will be quite long. NASA needs about 144,000 miles of nanotube to build one. In theory, a cable would extend 22,000 miles above the Earth to a station, which is the distance at which satellites remain in geostationary orbit. Due to the competing forces of the Earth's gravity and outward centrifugal pull, the elevator station would remain at that distance like a satellite. Then the cable would extend another 40,000 miles into space to a weighted structure for stability. An elevator car would be attached to the nanotube cable and powered into space along the track.

NASA and its partner, the Spaceward Foundation, hope that a space elevator could serve as a cost-effective and relatively clean mode of space transportation. NASA's current shuttle fleet is set to retire in 2010, and the organization doesn't have enough funds to replace it until 2014 at the earliest. To fill the gap, NASA is hiring out shuttles to provide transportation to the International Space Station from private companies.

So NASA could use a space elevator, the sooner the better. Space elevators could lift material at just one-fifth the cost of a rocket, since most of a rocket's energy is used simply to escape Earth's gravity. Not only could a space elevator offer research expeditions for astronauts, the technology could also expand the possibilities for space tourism and even space colonization.

Currently, the Cambridge team can make about 1 gram of the new carbon material per day, which can stretch to 18 miles in length. Alan Windle, professor of materials science at Cambridge, says that industrial-level production would be required to manufacture NASA's request for 144,000 miles of nanotube. Nevertheless, the web-like nanotube material is promising.

"The key thing is that the process essentially makes carbon into smoke, but because the smoke particles are long thin nanotubes, they entangle and hold hands," Windle said. "We are actually making elastic smoke, which we can then wind up into a fiber."

Windle and his colleagues presented their results last month at a conference in Luxembourg, which attracted hundreds of attendees from groups such as NASA and the European Space Agency. John Winter of EuroSpaceward, which organized the conference, thought the new material was a significant step.

"The biggest problem has always been finding a material that is strong enough and lightweight enough to stretch tens of thousands of miles into space," said Winter. "This isn't going to happen probably for the next decade at least, but in theory this is now possible. The advances in materials for the tether are very exciting."

via: Times Online and Gizmodo

© 2009 PhysOrg.com

Explore further: Nanomaterials to preserve ancient works of art

add to favorites email to friend print save as pdf

Related Stories

Team develops cognitive test battery for spaceflight

Nov 26, 2014

Space is one of the most demanding and unforgiving environments. Human exploration of space requires astronauts to maintain consistently high levels of cognitive performance to ensure mission safety and success, and prevent ...

New mushroom discovered on campus is the first since 1985

Nov 24, 2014

Two researchers who recently named the first new species of mushroom from the UC Berkeley campus in more than 30 years are emphasizing the need for continued green and open space on campus, as well as a full-fledged ...

Underwater robot sheds new light on Antarctic sea ice

Nov 24, 2014

The first detailed, high-resolution 3-D maps of Antarctic sea ice have been developed using an underwater robot. Scientists from the UK, USA and Australia say the new technology provides accurate ice thickness ...

Recommended for you

Nanomaterials to preserve ancient works of art

6 hours ago

Little would we know about history if it weren't for books and works of art. But as time goes by, conserving this evidence of the past is becoming more and more of a struggle. Could this all change thanks ...

Learning anti-microbial physics from cicada

7 hours ago

(Phys.org) —Inspired by the wing structure of a small fly, an NPL-led research team developed nano-patterned surfaces that resist bacterial adhesion while supporting the growth of human cells.

User comments : 51

Adjust slider to filter visible comments by rank

Display comments: newest first

4.3 / 5 (7) Jan 23, 2009
FINALLY!!!!! The space elevator will solve all of our problems!!! We'll be able to lift heavy hardware, so we'll be able to build strong and big ships right there on space!
1 / 5 (10) Jan 23, 2009
Every terrorist group in the world is praying that one is built so they can go fly something heavily laden with fuel and explosives in it to destroy it!

Imagine 35,000 miles of carbon nanotube ribbon falling back down to earth with a huge captured asteroid counterweight falling with it!!
5 / 5 (7) Jan 23, 2009
If it snapped the asteroid would fly away from the Earth and not fall back down.
5 / 5 (5) Jan 23, 2009
If it snapped the asteroid would fly away from the Earth and not fall back down.

Furthermore most designs for a space elevator involve it being able to move at least slightly to avoid collisions with satellites, and also a no-fly zone around it in which anything will be shot down.
5 / 5 (6) Jan 23, 2009
Finally, we have a material strong enough to make those elusive boot straps...You know--the ones we will be pulling ourselves up with.
2.3 / 5 (4) Jan 23, 2009
If it snapped the asteroid would fly away from the Earth and not fall back down.

Furthermore most designs for a space elevator involve it being able to move at least slightly to avoid collisions with satellites, and also a no-fly zone around it in which anything will be shot down.

Possibly... depends on how much further out from geosynch orbit the counterweight is and how much tension is on the ribbon. If only enough tension is on the ribbon to be able to lift a few hundred tonnes of mass then a passenger airliner slamming into the ribbon might impart enough force to snap tug the counterweight and all that additional ribbon mass into the earths gravity well..

I say we will never build one as long as kook religious zealots are still killing people over fictitious supernatural beings...
3.8 / 5 (4) Jan 23, 2009
So much fear and doubt. How do you guys get out of bed in the morning?
5 / 5 (4) Jan 23, 2009
Damn, they're stringing me along with all these tempting stories of space elevators..
2.7 / 5 (3) Jan 23, 2009
There are numerous issues with a space elevator that will need to be overcome. For example, once you place some cargo on it, it has to move through the atmosphere and is subject to wind forces which will be a constant drag on the satellite hosting the ribbon. The ribbon itself will have little drag because of its thinness. The tension over such distances is also not properly understood while the cargo is in the atmosphere. So a higher altitude attachment point is preferred. However, you also want an equatorial location to minimize "wobble" of the orbit. So you need to find the highest equatorial point, perhaps somewhere in Ecuador.

Now perhaps the space elevator idea will be a lot easier to manage on the moon. However, I'm not sure how far off the surface it would have to be to match the moon's slow rotation - perhaps as far as the earth? Perhaps much farther?
1 / 5 (3) Jan 23, 2009
Great! I will contribute 15 cents, (about my level of interest). Now if everyone on earth makes a similar contribution -. No, wait, if those carbon tubes cut lines of force, and the earth tie is insulated there would be enough power to ------- naw!
3 / 5 (2) Jan 23, 2009
Oh yeah man, That shits highly conductive. We would probably be drawing megawatts out of the magnetosphere.
3.8 / 5 (4) Jan 23, 2009
I've read that if those Carbon Nanotube lines snapped, the line itself would just burn up in the atmosphere, and the station will be in geosynchronous orbit, so it would stay exactly where it was (it might recoil a little bit into a higher orbit, but not much).

So there isn't any danger to these things. Mind you, that doesn't mean we'd want terrorists trying to snap the lines. It would be horribly expensive to re-string the station to Earth again.

I am worried about some of the torques and high-altitude stresses though. AFAIK no one has worked out exactly how strong a cable would have to be to withstand those forces with a decent sized cargo hanging from the line.
5 / 5 (3) Jan 23, 2009
Wow. Great news. Not to mention just a year or so ago when I read about the concept they thought it was still at least a century or so and now they are thinking in a few decades!! The power of science should never be underestimated.
3 / 5 (2) Jan 23, 2009
A counterweight in space? where would the fulcrum be?
3.7 / 5 (3) Jan 23, 2009
At geostationary orbit. Without the counterweight, the mass of the cable between Earth and GEO would pull the station into a lower orbit. Likewise, without the Earth on the lower end, the mass of the counterweight would pull the station into a higher orbit. Remember, the cable itself is NOT in orbit, except at GEO. With the system intact, the tension is high enough that any break will pull everything above the break into a higher orbit, leaving only the Earth end to impact. Using an airplane, this would be less than 20 kilometers or so of cable. Even a low-orbit impact would leave only a few hundred kilometers to impact.

Also, since the cable is not in orbit, anything dropped from it won't just float alongside. There will be effective gravity, either real or centrifugal, everywhere except at GEO.
5 / 5 (5) Jan 23, 2009
Every terrorist group in the world is praying that one is built so they can go fly something heavily laden with fuel and explosives in it to destroy it!

Imagine 35,000 miles of carbon nanotube ribbon falling back down to earth with a huge captured asteroid counterweight falling with it!!

If only there was some kind of aircushion to prevent the wire from reaching dangerous speeds, you know, like a 5 trillion tonne atmosphere or something?

If only the cable could be made out of a thin ribbon of super-hard material that would slice through a plane like butter, you know, like carbon nanotubes?

Oh and the counter-weight will probably be made from yet more carbon nanotube ribbon stretching further into space.
2 / 5 (4) Jan 23, 2009
My prediction?

No space elevator. :) Enjoy.
1.3 / 5 (7) Jan 23, 2009
my curiosity lays in how many strands it would take.

from what i figure, it will take 293 days to create one strand of nanotube 1 mile long at the rate stated in the article. with a total of 62000 miles of nanotube required, it would take about 18,186,666 days to make it. then if you multiply that by the number of strands necessary to support the space elevator, lets say a smaller number, around 50,000 (NO IDEA IF THIS IS EVEN CLOSE TO NUMBER NEEDED, WHETHER < OR >), you get 909,333,333,333 days.

If you see a flaw in my math there, just let me know, I do after all have a few behind me (ok, quite a few). But from I'm figuring at the moment, at the current rate of production, it would take ~2,491,324,201 years to make the nanotube structure alone. The elevator would be dust by then :)
Anyways, assuming my drunken math is around accurate there, then this is simply not realistic, as there is little to no possibility that production of this nanotube will multiply by 2 billion fold to make around a 2 1/2 yr project (unsure of cost effectiveness however so cannot equate that in). Hell, even at making it a 50 yr project...can anyone see production getting that large for nanotubes.

with all that being said, this is a kick a** idea. but i sure as hell would need a stewardess with tons of alcohol on board if the thing ever stalled or broke down.

I would think some sort of controller electromagnestism would be more cost effective, faster, and safer.
1.5 / 5 (4) Jan 23, 2009
to clarify my math: i assume the central posting is what is made of nanotubes, and that it is set up in a twisted cable configuration in order to support the weight of the elevator and cargo.

also, it may be possible controlled electromagnetism is the plan with the nanotubes being the conduit...no clue...doesn't say in the article either. But if that is the plan, if I had the say so, I'd scrap the hell out of it and user something else, just based on the timeframe I mentioned.
I am certain there are many facts we don't know on this though, so my statements could simply end up being in inaccurate. Right or wrong, at least the answer may be known by someone :)
5 / 5 (4) Jan 24, 2009
Its being produced in LAB SCALE!!!! COME'ON!! Id industrial scale it will be solved
5 / 5 (2) Jan 24, 2009
LuckyBrandon, this material is being produced in a lab now. I don't think it's unlikely that with better techniques and mass production it could easily be sped up by a factor of a billion. Besides that, this technique is not good enough yet. The nanotube cable still needs to be quite a bit stronger to have an efficient design. At the current strength you need a heck of a lot of material to support it. With stronger cables you need much less. This material isn't even close to half the theoretical limit of carbon nanatube strength.
this article states that is would reduce the cost to orbit by a factor of 5. More like a factor of a 100.
3.7 / 5 (3) Jan 24, 2009
It sounds like the counterweight would be a hundred thousand miles past the geosync point where the actual station would be. What I wonder is how would they sync the two? The geo point goes around the earth in 24 hours but a natural satellite at say, 100,000 miles up would go much slower so how do you keep it from just winding up the tether and impacting the atmosphere at some point? Would you have to have some constant acceleration like with a solar powered ion motor to have it keep up and be in a more or less straight line? This is what I keep thinking about in this scheme. A huge benefit in that regard could be launching vehicles into space past or close to escape velocity and the timing of the release able to sling payloads to anywhere in the solar system with much less delta V needed than any kind of rocket on earth. Does anyone here know how they would keep the counterweight in a more or less straight line?
5 / 5 (2) Jan 24, 2009
The idea of "spinning smoke into thread" was awesome imagery!
The article doesn't mention the strength of these tubes :(
I think platinum is able to stretch much more than 18 miles per gram.
5 / 5 (3) Jan 24, 2009
The tubes have a tensile strength of 9 GPa, four times stronger than Kevlar. Here is more on the development, and feasibility of an elevator with this material.
1 / 5 (2) Jan 24, 2009
point well given and received :)

i spoke using numebrs from the lab scale only because it doesnt specify any cost estimates for producing the nanotubes by the gram or by the mile or anything. if its not all that expensive, sure, industrial scale is realistic. chances are though, i bet, that this is a very expensive process to build these, which could make industrialization not really feasible until a more cost effecive method could be found.
our species has accomplished some TREMENDOUS feats...but I am very skeptical that we could, would, or even should build something that is 62000 miles and would likely be prone to many problems.

that would be a site to behold though, the construction of such a thing...imagine riding the elevator up it while you built it.
3.7 / 5 (3) Jan 24, 2009
Look up the aramid fiber, Spectra, or Vectran (Vectra), it has a strength of 50k or 100k x stronger than steel, the caveat being that it is a calculation on weight vs strength. Way stronger than Kevlar, lb for lb. This stuff is so tough (molecular bonding) you can't cut it with extreme grade scissors or 10" pro sidecutters. It's absolutely miserable stuff to work with. When you DO get it cut, it fuses and it stinks of burnt plastic (avec smoke!), which tells you flat out, that the molecular bonding is quite extreme (energy emissive when the bonding is broken).

As for this idea of a 'space elevator', READ the Arthur C. Clarke Novel called 'The Fountains of Paradise' which introduced this subject to the world, in a science backed Sci-Fi novel. Arthur's elevator, was built in Sri Lanka, for the reasons covered here. Arthur covers all of the challenges.

We are ALSO inches away fro Larry Niven's ideas on a thing in his novels he called 'Sinclair Molecule Chain', which is literally the kind of material needed here. Read Some of his works for a in-depth covering of the technical and social/cultural integration of that sort of material.

If someone DOES create such a material- PLEASE have the common sense to be named 'Sinclair', OK?
not rated yet Jan 24, 2009
I've been trying to figure out the dynamics of this but it's been thirty years since I was a physics undergraduate.

If the station at the end of the elevator is in geosynchronous orbit and you haul something from the earth's surface to that orbit don't you have to give it (ignoring friction from the atmosphere) exactly the same amount of energy and momentum that you would have to if you launched it? That is the change in potential climbing out of the gravity well and the change in kinetic to orbit the earth once in 24 hours.

Does a space elevator just save you the friction cost (but what is the friction on the cable) and the reusability of the launch vehicle? Of course you could recover energy from things going down and use that to supplement things going up but the whole point is to put more stuff up than comes down.

Has anyone got a pointer to a good paper on the subject? Google is just turning up a lot of articles with no real physics discussion.
4.2 / 5 (5) Jan 24, 2009
Yes, you do have to give it the same amount of orbital energy. The savings is that you don't have to lift the fuel, tanks, motors and other dead weight of the rocket along with the payload, and the energy is used over a much longer period, rather than expended (almost) instantly. And, yes, you can recover the energy, if the system is designed right, which would also solve the orbital energy imbalance. If all of the mass is going one way, eventually the GEO station will gain/lose enough energy to change its orbit. This will likely be the case in the early years, since there won't be any inbound shipments. Thus, a small amount of rocket power will be needed to maintain the orbit, but that can be supplied by hauling the fuel up on the elevator, which wouldn't be that expensive.

As for the counterweight, there are at least three ideas:

1: Extend the cable, and use the extra cable as counterweight mass. This produces the longest elevator, which would be handy for launching interplanetary probes, as a sling. It's also the most expensive in terms of cable cost.

2: Use the construction equipment as the counterweight. Some designs call for sending an initial strand up by rocket, and then adding more with small climbers/cable layers. These could be left at the end as part of the counterweight. This may be the simplest, as it would be quicker than having a single machine climb back down after each strand is added, and less wasteful than simply turning them loose in space.

3: Use a large rock for the counterweight. This would be the ideal solution for a BIG elevator, but the cost of catching a small asteroid for the first, small cable would be prohibitive.

For those who want the math, here is why the actual center of mass is above GEO:
I didn't realize that, but with a large counterweight, it makes sense.

For a technical analysis, here is a large PDF file from the Nasa Institute for Advanced Concepts. It's 80 pages, 15.36MB, and may take a while to load on a slow connection:
It does have some VERY technical formulas, still but makes for interesting reading.

1 / 5 (2) Jan 24, 2009
I suspect that any terrorists would choose to attack the cable at a very high altitude, preferably above the atmosphere. Maybe they'd use one of those new spaceships we'll be building in our new orbital shipyard to ram the cable or toss an asteroid at it. All of the cabling below the break would fall back to Earth with incredible momentum. The higher the break (up to a point), the more damage it does. There's an excellent graphic description of just such a catastrophe in Kim Robinson's "Red Mars" book, and he appears to have done his physics homework. The impact zone wraps several times around the planet and, near the end of that string, the effect is like a continuous string of nuclear bombs (only without the radiation).

Of course, space terrorists wouldn't necessarily need a space elevator to wreak havoc on Earth. They could just lob a few hundred iron-based asteroids at us, and maybe we could deflect them all in time or maybe we couldn't. Or they could use a rail gun or a laser. The possibilities are limitless, and unfortunately our offensive technology seems to be outpacing the defensive. (We still have no technological defense against your basic nuclear bomb!)
1 / 5 (3) Jan 24, 2009
Screw the space elevator. I like that idea of putting a very massive weight (lifted in sections) into orbit with a tether behind it. Then you outfit those suborbital space planes that seem to be good for nothing but giving rich folk a few minutes of over priced enjoyment and attach a magnetic grapple so it can grab the tether without ripping itself to shreds. As the tether moves through the grapple the magnets leach energy of motion to accelerate the suborbital ship to orbital velocity and only slows the large orbital tow mass to a slightly lower orbit. The orbital mass is then returned to a higher orbit slowly with very efficient but low power ion engines over a longer time frame.

This would let you fly people and cargo to space in a small ship with far less fuel weight except for the occasional heavy load of fuel for the ion engines.

But these carbon cables are nothing to sneeze at. there are going to be a lot of uses for then in space and more down to earth construction and engineering jobs.
not rated yet Jan 24, 2009
Not too long ago they thought this idea would be impossible, now they have a way, even though its not perfect yet my guess is in the next few years they'll have another way that will work a lot better, and so on, besides soon we'll be in the point where amazing scientific discoveries will be made almost every minute overlapping each other and things we never dreamed of will be possible, so I wouldn't dismiss any ideas they come up with. But.. a space elevator would be pointless if they came up with a way to fly using magnetism instead of way too much fuel.
1 / 5 (2) Jan 24, 2009
For the reasons nkalanaga and others have said, the concept will always be at the BOZO level. It would be less practicable than building a 300 km tower. Babel on.
not rated yet Jan 24, 2009
the terrorist comment was really lame - laden planes only fly into things when they are on autopilot.

5 / 5 (1) Jan 24, 2009
Induced currently in the space elevator will be one MAJOR drawback. This wire will cut through earth's plasma sheaths providing a near direct route for energy to pass from space to earth. it will get fried!


great idea. i hope they try it. but i doubt it will be feasible, at least not in one great long wire from heaven to earth.
not rated yet Jan 24, 2009
Induced current comes at a price. In this case, a lower energy orbit. It's the ol' action/reaction Newton thingy. When you try to get something for nothing, you usually get the reverse. Just ask Our Lady of Perpetual Motion.
3 / 5 (2) Jan 24, 2009
The induced current wouldn't have to be a problem. It would be dependable, so simply attach a load to the circuit and consider it a power plant. Not only would it be cleaner than any fuel-burning design, including nuclear, but the energy would be available to power the elevator system itself. It might affect the orbit, but that could be built into the design, and the counterweight mass adjusted as needed.
1 / 5 (1) Jan 25, 2009
nkalanaga, I don't agree. What could you possibly mean by "counterweight?" Do you mean a "sky hook?" Consider how induction works. If you take a wire or coil and run it by a magnetic field, it will induce a current but it takes energy to do that. In this case, it will rob the spacecraft of just that amount of energy that was produced by the field/wire arrangement. It's not like solar cell panel where you actually collect free enregy via photons. Remember, a rocket engine is fairly ineficient. The cost in fuel is to high to have it sapped away by this contraption. You wouldn't put a windmill on top of your car to run your air-conditioner. The drag would be prohibitive.
not rated yet Jan 25, 2009
Heres my question, suppose we get these little robot spiders to string the strands one at a time, or however they do it, at what point to they embed the power lines into the middle of the tether? logically, the first strand would be the center strand, right?
not rated yet Jan 25, 2009
1/5th the cost of rockets? Current or theoretical? Sea Dragon was thought to have mass to orbit costs 1/4 or less of saturn 5. No special tech required.
1 / 5 (2) Jan 25, 2009
Even at 1/5th the cost, tether to electricty is not only impractical, it's insane. Also, long voyages of heavy manned vehicles without nuclear energy would be unthinkable. For the life of me, I never understood why NASA wasted any time with the tether experiment. What was the point?
1 / 5 (2) Jan 25, 2009
The point was to equip the shuttle with an ultraviolet camera system and watch how many extradimensional beasties would gather around a high energy source in high earth orbit.
3 / 5 (2) Jan 25, 2009
Actually, the present idea is to power the climbers with lasers or microwaves from either the ground or GEO, so there won't be any power lines in the cable. All it will do is support the climbers.

As for induced current, the study paper I posted the link to has this to say, although they are talking primarily about electromagnetic heating.

"Heating of the cable can be produced by passage through the local magnetic fields. The
potential induced along the cable can be expressed as:
E = B(r)v(r)
where E is in volts/meter, B(r) is the magnetic field, and v(r) is the velocity of the cable relative
to the magnetic field. For radii (r)
3 / 5 (2) Jan 25, 2009
Interesting. It seems to have cut my comment off.
for radii less than 10rEarth, B(r) ~ 0.35_10-4rEarth
3/r3 and v(r) is approximately
zero. However, if we assume the worst possible case where the magnetic field is fixed and the
cable is rotating with the Earth (v(r) = 463 r/rEarth m/s) we get potentials from 0.00026 V/m at
10rEarth to 0.016 V/m at Earth%u2019s surface. At distances of greater than 10rE, the cable is in the
interplanetary magnetic field during the day (Bave ~6 nT and Bmax ~80 nT) and is in the Earth%u2019s
magnetosphere at night. This corresponds to a maximum potential of 0.00068 V/m at the far end
of the cable. With a minimum resistance of 0.4 W/m we have a maximum of 0.0064 W/m of
heating occurring near the Earth end of the cable and 1 mW at the far end. The cable would
quickly radiate this level of heating away into space.
1 / 5 (1) Jan 25, 2009
damon hastings-
any offensive weapon is also a defensive weapon, just as any defensive weapon is ultimately an offensive weapon. it just depends on who is attacking, and who is being attacked, to make the determination of whether a weapon is being used as defensive or offensive. Weapons are just weapons...not sure how weapons and terrorists got brought into this though. The terrorists aren't that good anyways...its just a bunch of religious idiots who think everyone in the world but them wants to kill their religion off.

KBK-damn good post

daqman-you also have the cable to help support the elevator platform, so since its not suspended in thin air, i wouldnt think the nergy required to exit earths gravitational pull would be anywhere near that required for a rocket. that of course entails the idea of some friction/clamping effect on the cable itself (which if they put brakes on, shouldnt even be a question of whether that will exist...i know id want brakes on that beast if i were screaming back at the earth from 20000 miles up on an elevator (literally in this scenario) :D

nklanaga-good references; good math :D oh and good later addition too :)

joey tavarez- you forgot, its auto pilot with the bush administration at the remote control end :D

seanpu-i do agree, but the material in teh nanotubes, as mentioned as these guys who layed out the specs on teh strength of those things, VASTLY outdoes the material mentioned for the last attempted tether...that could make the difference there. i do agree though, this probably isnt feasible...

phlipper-ahhh, but you would/could put multiple smaller windmills creatively around your car (for instance, inside the grill, in the wheel wells, in front the the lower air dam if youve got a sports car, etc., that would cause no more drag effect than those items do themselves (especially if you catch it immediately at that break point anyways). so that is actually feasible, and an idea ive been tooling around in my brain for a couple years..although i just gave it away so now well see it on the market soon :)

not rated yet Jan 25, 2009
here again you are suggesting that energy can be collected without a complete circuit. to generate power in this way there would have to be a return sytem for the electrons to return to the atmosphere. All, I repeat ALL electrical circuits form a complete loop.
5 / 5 (1) Jan 25, 2009
here again you are suggesting that energy can be collected without a complete circuit. to generate power in this way there would have to be a return sytem for the electrons to return to the atmosphere. All, I repeat ALL electrical circuits form a
complete loop.

I think you need to read up on your tesla.
not rated yet Jan 26, 2009
no you need to try and do what you say in any test configuration. All electrical circuits are a balance of flow and return. It could be conceived that static does not fit this fact but static cannot be used to drive or power any applience. Electricity is not a substance like water which flows.
I can back this with a lifetime of work.
not rated yet Jan 27, 2009
Returning to your comments re Tesla, what I imagine you are talking about are his transmission of electricity through the air. what you do not realise is that for ny device to use this type of transmission it had to be earthed (connected to the ground) this is what provides the return the ground itself. Non of Tesla's experiments are unexplainable and all include a complete loop circuit in some form or other but this may not be imeadiately obvious.
not rated yet Jan 27, 2009
let me offer you further evidence: some time ago an attempt to generate electricity was done by towing a single cable behind an orbitibg craft so that the cable passed through the earths magnetic field. It did not work and the cable blew itself apart. It would have worked had they formed the cable into a loop and dragged this through the earth magnetic field. what happened was that the single cable generated so much static it blew apart in a form of lighning. If you would like to offer any example of flow without return for electricity I will be glad to explain how it is really working.
not rated yet Jan 29, 2009
Pretty interesting. My question to you, my learned friends is, can anything else be made out of this stuff? Would it work for body armour or to make planes stronger?
1 / 5 (1) Jan 29, 2009
all of those ideas are on the horizon.i would personally look to things like suspension bridges being the first to incorporate these items in an industrial production model.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.