Golden scales: Nanoscale mass sensor from Berkeley can be used to weigh individual atoms and molecules

Jul 28, 2008
A double-walled carbon nanotube NEMS has been used to measure the mass of a single atom of gold. Atoms landing on the tube change the tube's resonant frequency in proportion to the mass of the atoms, much like what happens when a diver hits a springboard. Image by Kenneth Jensen

( -- There's a new "gold standard" in the sensitivity of weighing scales. Using the same technology with which they created the world's first fully functional nanotube radio, researchers with Berkeley Lab and the University of California at Berkeley have fashioned a nanoelectromechanical system (NEMS) that can function as a scale sensitive enough to measure the mass of a single atom of gold.

Alex Zettl, a physicist who holds joint appointments with Berkeley Lab's Materials Sciences Division (MSD) and UC Berkeley's Physics Department, where he is the director of the Center of Integrated Nanomechanical Systems, led this research. Working with him were members of his research group, Kenneth Jensen and Kwanpyo Kim.

"For the past 15 years or so, the holy grail of NEMS has been to push them to a small enough size with high enough sensitivity so that they might resolve the mass of a single molecule or even single atom," Zettl said. "This has been a challenge even at cryogenic temperatures where reduced thermal noise improves the sensitivity. We have achieved sub-single-atom resolution at room temperature!"

The new NEMS mass sensor consists of a single carbon nanotube that is double-walled to provide uniform electrical properties and increased rigidity. One tip of the carbon nanotube is free and the other tip is anchored to an electrode in close proximity to a counter-electrode. A DC voltage source, such as from a battery or a solar cell array, is connected to the electrodes. Applying a DC bias creates a negative electrical charge on the free tip of the nanotube. An additional radio frequency wave "tickles" the nanotube, causing it to vibrate at a characteristic "flexural" resonance frequency.

When an atom or molecule is deposited onto the carbon nanotube, the tube's resonant frequency changes in proportion to the mass of the atom or molecule, much like the added mass of a diver changes the flexural resonance frequency of a diving board. Measuring this change in frequency reveals the mass of the impinging atom or molecule.

"Getting nanotubes to vibrate is fairly easy," said Jensen. "The difficult part is detecting those small vibrations. We accomplished this by field-emitting, or spraying, electrons from the tip of the nanotube and detecting the resulting electrical current."

Using their NEMS mass sensor, Zettl, Jensen and Kim were able to weigh individual gold atoms and measure masses as small as two fifths that of a gold atom at room temperature and in just a little more than one second of time. A gold atom has a mass of 3.25 x 10-25 kilograms, which means that there are about 3 million million million million gold atoms in a single kilogram.

While there have been other NEMS that function as mass sensors before, most of these previous devices were fashioned from silicon, and none had achieved the magical single-atom resolution at room temperature. The carbon nanotube mass sensor of Zettl's group is a thousand times smaller by volume than typical NEMS resonators – measuring only about a billionth of a meter in diameter and 200 billionths of a meter in length.

"Carbon nanotubes are the ideal material for this purpose and their small size makes them sensitive enough to resolve single atoms even at room temperature," Jensen said.

While scientists already have the ability to measure the mass of individual atoms through a complex technique known as mass spectrometry, this new carbon nanotube NEMS mass sensor offers some distinct advantages and opens the door to new possibilities, as Jensen explained.

Citation: Zettl, Jensen and Kim described their NEMS mass sensor in a paper published in the journal Nature Nanotechnology, entitled: "An atomic-resolution nanomechanical mass sensor."

Provided by Lawrence Berkeley National Laboratory

Explore further: Single unlabelled biomolecules can be detected through light

add to favorites email to friend print save as pdf

Related Stories

Cornell scientists review future of graphene

Nov 09, 2011

( -- Graphene is sort of a scientific rock star, with countless groups studying its amazing electrical properties and tensile strength and dreaming up applications ranging from flat-panel screens ...

Researchers develop bistable nano switch

Oct 13, 2006

Carbon nanotubes (CNT) have been under intense study by scientists all over the world for more than a decade and are being thought of as ideal building blocks for nanoelectromechanical systems (NEMS). A type of one-dimensional ...

Recommended for you

Engineers show light can play seesaw at the nanoscale

20 hours ago

University of Minnesota electrical engineering researchers have developed a unique nanoscale device that for the first time demonstrates mechanical transportation of light. The discovery could have major ...

A nanosized hydrogen generator

Sep 20, 2014

( —Researchers at the US Department of Energy's (DOE) Argonne National Laboratory have created a small scale "hydrogen generator" that uses light and a two-dimensional graphene platform to boost ...

For electronics beyond silicon, a new contender emerges

Sep 16, 2014

Silicon has few serious competitors as the material of choice in the electronics industry. Yet transistors, the switchable valves that control the flow of electrons in a circuit, cannot simply keep shrinking ...

User comments : 1

Adjust slider to filter visible comments by rank

Display comments: newest first

3 / 5 (2) Jul 28, 2008
This article told me almost nothing that the headline didn't. Way to go.

Anyway, interesting topic, and I would like to know more!