Nanoscale tetrapods could provide early warning of a material's failure

Nanoscale tetrapods could provide early warning of a material’s failure
These atom-scale computer simulations of tetrapods show how they sense compression (left) and tension along one axis (right), both of which are crucial to detecting nanoscale crack formation. The color bar indicates the percent change of the tetrapods’ volume. Credit: Berkeley Lab

Light-emitting, four-armed nanocrystals could someday form the basis of an early warning system in structural materials by revealing microscopic cracks that portend failure, thanks to recent research by scientists from the U.S. Department of Energy's Lawrence Berkeley National Laboratory (Berkeley Lab) and UC Berkeley.

The researchers embedded tetrapod-shaped quantum dots, which are nanosized semiconducting particles, in a polymer film. The tetrapods' cores emit fluorescent light when their arms are twisted or bent out of shape. This indicates the polymer is undergoing a degree of tensile or compressive strain, from which over sub-micron-scale regions of the material can be detected. Such stress can cause nanoscale cracks to develop into macroscopic failure. Initial tests show the tetrapods can cycle more than 20 times without losing their ability to sense stress, and they don't degrade the strength of the polymer in which they're matrixed.

So far the scientists have tested their approach in the lab, but in practice, all that would be needed to detect the tetrapods' fluorescent warning is an off-the-shelf, portable spectrometer. A person could point a spectrometer at a steel beam, airplane wing, or any material that has the tetrapods embedded inside, and the spectrometer could potentially detect incipient cracks that are only 100 nanometers long.

"This is the length scale at which cracks develop, which is when you want to catch them, well before the material fails," says Shilpa Raja, who conducted the research while she was an affiliate in Berkeley Lab's Materials Sciences Division and a PhD student at UC Berkeley. Raja is now a postdoctoral scholar at Stanford University. Robert Ritchie and Paul Alivisatos, also of the Materials Sciences Division and UC Berkeley, are the co-corresponding authors of a paper on this research published online in the journal Nano Letters (2016, vol. 16, issue 8, pgs. 5060-5067).

"Our approach could also be a big step toward self-healing smart materials. The tetrapods could be coupled with nanosized repair particles to form a material that senses local stress and then repairs itself," adds Raja.

Nanoscale tetrapods could provide early warning of a material’s failure
This schematic shows a tetrapod-polymer film before and after it is stretched length-wise. The orange areas are clusters of tetrapods. The scientists found the color of light emitted by the tetrapods changed when the polymer was stretched. Credit: Berkeley Lab

In addition to materials applications, the tetrapods could potentially be used to detect the presence of cancerous cells in tissue samples because have different mechanical properties than healthy cells, such as an increased stiffness.

To develop the technique, the scientists started with a polymer widely used in airframes and other structures. They mixed tetrapod nanocrystals into the polymer and cast slabs of the mixture in petri dishes. The slabs were then mounted in a tensile tester and exposed to a laser. This allowed the researchers to simultaneously measure the slab's fluorescence and mechanical stress.

"This is a low-cost fabrication technique, and it resulted in the best optomechanical agreement between fluorescence and mechanical tests sensed by a nanocrystal in a film," says Raja.

Raja says the ' shape makes them very sensitive to stress. Their four arms act as antennae that take stress from their immediate environment, amplify the stress, and transfer it to the core. The color of light emitted by the core indicates the degree of stress (and strain) felt by the arms.

Their approach promises to be a big improvement over current ways to detect nanoscale stress in materials, particularly in the field. This can be done in the lab with techniques like atomic force microscopy and nano-indentation techniques, but these require a very controlled environment. Over the past five years, scientists have developed ways to matrix other stress-sensing nanoparticles into materials, but these methods have a very low signal-to-noise ratio and don't use visible light detection. In addition, some of these approaches degrade the of the material they're embedded in, or they can't cycle back and forth, meaning they can only give a warning signal once.

More information: Shilpa N. Raja et al. Mechanisms of Local Stress Sensing in Multifunctional Polymer Films Using Fluorescent Tetrapod Nanocrystals, Nano Letters (2016). DOI: 10.1021/acs.nanolett.6b01907

Journal information: Nano Letters

Citation: Nanoscale tetrapods could provide early warning of a material's failure (2016, September 20) retrieved 29 March 2024 from https://phys.org/news/2016-09-nanoscale-tetrapods-early-material-failure.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Tetrapod nanocrystals light the way to stronger polymers

286 shares

Feedback to editors