James Webb Space Telescope secondary mirror installed

March 7, 2016 by Laura Betz/rob Gutro
In this photo, engineers are seen installing the secondary mirror onto the telescope. Credit: NASA/Chris Gunn

The sole secondary mirror that will fly aboard NASA's James Webb Space Telescope was installed onto the telescope at NASA's Goddard Space Flight Center in Greenbelt, Maryland, on March 3, 2016.

The Webb telescope uses many mirrors to direct incoming light into the telescope's instruments. The secondary mirror is called the secondary mirror because it is the second surface the light from the cosmos hits on its route into the telescope.

Before its launch, engineers must build and test the telescope rigorously to ensure it survives its launch and its trip one million miles out into space. The James Webb Space Telescope is too large to fit into a rocket in its final shape so engineers have designed it to unfold like origami after its launch.

That unfolding, or deployment, includes the mirrors on the observatory, too.

The secondary mirror is supported by three struts that extend out from the large . The struts are almost 25 feet long, yet are very strong and light-weight. They are hollow composite tubes, and the material is about 40-thousandths of an inch (about 1 millimeter) thick. They are built to withstand the temperature extremes of space.

Unlike the 18 primary segments that make up the biggest mirror on the Webb telescope, the secondary mirror is perfectly rounded. The mirror is also convex, so the reflective surface bulges toward a light source. It looks much like the curved mirrors on the walls near parking garage exits that let motorists see around corners. The quality of the secondary mirror surface is so good that the final surface at cold temperatures does not deviate from the design by more than a few millionths of a millimeter - or about one ten-thousandth the diameter of a human hair.

James Webb Space Telescope secondary mirror installed
Diagram of the James Webb Space Telescope Credit: NASA

The powerful primary mirror of the Webb telescope is designed to gather the faint light from the first and most distant galaxies. The Webb telescope has 21 mirrors, 18 of which are primary mirror segments working together as one large 21.3-foot (6.5-meter) primary mirror. The primary mirror was completed when the 18th and final segment was installed on Feb. 4, 2016 at NASA Goddard.

The secondary mirror and all of the are made of beryllium, which was selected for its stiffness, light weight and stability at cryogenic temperatures. Bare beryllium is not very reflective of near-infrared light, so each mirror is coated with about 0.12 ounces of gold to enable it to efficiently reflect infrared (which is what the Webb telescope's cameras see).

The mirrors were built by Ball Aerospace & Technologies Corp., in Boulder, Colorado. Ball is the principal subcontractor to Northrop Grumman for the optical technology and optical system design. The installation of the mirrors onto the telescope structure is performed by Harris Corporation, a subcontractor to Northrop Grumman. Harris Corporation leads integration and testing for the telescope.

The most powerful ever built, the Webb will provide images of the first galaxies ever formed and study planets around distant stars. It is a joint project of NASA, the European Space Agency and the Canadian Space Agency.

Explore further: James Webb Space Telescope mirror halfway complete

Related Stories

James Webb Space Telescope mirror halfway complete

December 28, 2015

Inside NASA's Goddard Space Flight Center's massive clean room in Greenbelt, Maryland, the ninth flight mirror was installed onto the telescope structure with a robotic arm. This marks the halfway completion point for the ...

James Webb Space Telescope primary mirror fully assembled

February 4, 2016

The 18th and final primary mirror segment is installed on what will be the biggest and most powerful space telescope ever launched. The final mirror installation Wednesday at NASA's Goddard Space Flight Center in Greenbelt, ...

Video: NASA's Webb 'strutting its stuff'

May 20, 2015

The newest video in the "Behind the Webb" series, called "Strutting its Stuff," provides a look at three "struts" or poles that fold and unfold the secondary mirror on the James Webb Space Telescope. The video series takes ...

New video shows Webb Telescope first mirror installation

December 7, 2015

A new video from NASA shows the successful installation of the first of 18 flight mirrors onto the James Webb Space Telescope Structure, at NASA's Goddard Space Flight Center in Greenbelt, Maryland. The installation of the ...

By the dozen: NASA's James Webb Space Telescope mirrors

January 7, 2016

One dozen flight mirrors are now installed on NASA's James Webb Space Telescope, out of the eighteen mirror segments that make up the primary mirror. The assembly of the primary mirror is an important milestone for the Webb ...

Recommended for you

NASA missions harvest a passel of 'pumpkin' stars

October 27, 2016

Astronomers using observations from NASA's Kepler and Swift missions have discovered a batch of rapidly spinning stars that produce X-rays at more than 100 times the peak levels ever seen from the sun. The stars, which spin ...

A dead star's ghostly glow

October 27, 2016

The eerie glow of a dead star, which exploded long ago as a supernova, reveals itself in this NASA Hubble Space Telescope image of the Crab Nebula. But don't be fooled. The ghoulish-looking object still has a pulse. Buried ...


Adjust slider to filter visible comments by rank

Display comments: newest first

5 / 5 (2) Mar 08, 2016
I hope Northrop has enough money set aside in case they end up with another lawsuit with the government. Their last project (with the post office) ended up in court. If you get a damaged magazine or large envelope in your mail, chances are pretty good it was sorted on Northrop's monstrosity.
2.3 / 5 (3) Mar 08, 2016
Sorry to just ask here outright instead of researching it myself, but this is too convenient and I'm multi-tasking at the moment. So, I'm curious what shape the secondary is. Is there a document with the specs to the optical design online? I've read the obvious stuff and it only says "round". Does that mean it's spherical, or that's it's round, literally? If, so, what shape is the secondary? In mirror making terms.
not rated yet Mar 08, 2016
Sorry to just ask here outright instead of researching it myself, but this is too convenient and I'm multi-tasking at the moment
So... you're too darned lazy to do it yourself, aaaand would somebody else do it for you? Uh-huh: good luck with that...
not rated yet Mar 08, 2016
Sorry to just ask here outright instead of researching it myself....

Uh huh. Look up, waaaay up, at the top of this page you'll see a picture and on it there is a shiny goldy thingy.
5 / 5 (1) Mar 10, 2016
If I were working on this, I would find an inconspicuous spot and sign my name. Who am I kidding, let's be real, I would draw a cock and balls. Let the aliens who finds it in a 100 million years try to figure out that symbol.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.