Carbyne morphs when stretched: Calculations show carbon-atom chain would go metal to semiconductor

Jul 21, 2014
Carbyne turns from a metal to a semiconductor when stretched, according to calculations by Rice University scientists. Pulling on the ends would force the atoms to separate in pairs, opening a band gap. The chain of single carbon atoms would theoretically be the strongest material ever if it could be made reliably. Credit: Vasilii Artyukhov/Rice University

(Phys.org) —Applying just the right amount of tension to a chain of carbon atoms can turn it from a metallic conductor to an insulator, according to Rice University scientists.

Stretching the material known as carbyne—a hard-to-make, one-dimensional chain of —by just 3 percent can begin to change its properties in ways that engineers might find useful for mechanically activated nanoscale electronics and optics.

The finding by Rice theoretical physicist Boris Yakobson and his colleagues appears in the American Chemical Society journal Nano Letters.

Until recently, carbyne has existed mostly in theory, though experimentalists have made some headway in creating small samples of the finicky material. The carbon chain would theoretically be the strongest material ever, if only someone could make it reliably.

The first-principle calculations by Yakobson and his co-authors, Rice postdoctoral researcher Vasilii Artyukhov and graduate student Mingjie Liu, show that stretching carbon chains activates the transition from conductor to insulator by widening the material's band gap. Band gaps, which free electrons must overcome to complete a circuit, give materials the semiconducting properties that make modern electronics possible.

In their previous work on carbyne, the researchers believed they saw hints of the transition, but they had to dig deeper to find that stretching would effectively turn the material into a switch.

Carbyne chains of carbon atoms can be either metallic or semiconducting, according to first-principle calculations by scientists at Rice University. Stretching the chain dimerizes the atoms, opening a band gap between the pairs. Credit: Vasilii Artyukhov/Rice University

Each carbon atom has four electrons available to form covalent bonds. In their relaxed state, the atoms in a carbyne chain would be more or less evenly spaced, with two bonds between them. But the atoms are never static, due to natural quantum uncertainty, which Yakobson said keeps them from slipping into a less-stable Peierls distortion.

"Peierls said one-dimensional metals are unstable and must become semiconductors or insulators," Yakobson said. "But it's not that simple, because there are two driving factors."

One, the Peierls distortion, "wants to open the gap that makes it a semiconductor." The other, called zero-point vibration (ZPV), "wants to maintain uniformity and the metal state."

Yakobson explained that ZPV is a manifestation of , which says atoms are always in motion. "It's more a blur than a vibration," he said. "We can say carbyne represents the uncertainty principle in action, because when it's relaxed, the bonds are constantly confused between 2-2 and 1-3, to the point where they average out and the chain remains metallic."

But stretching the chain shifts the balance toward alternating long and short (1-3) bonds. That progressively opens a band gap beginning at about 3 percent tension, according to the computations. The Rice team created a phase diagram to illustrate the relationship of the band gap to strain and temperature.

How carbyne is attached to electrodes also matters, Artyukhov said. "Different bond connectivity patterns can affect the metallic/dielectric state balance and shift the transition point, potentially to where it may not be accessible anymore," he said. "So one has to be extremely careful about making the contacts."

"Carbyne's structure is a conundrum," he said. "Until this paper, everybody was convinced it was single-triple, with a long bond then a short bond, caused by Peierls instability." He said the realization that quantum vibrations may quench Peierls, together with the team's earlier finding that tension can increase the and make carbyne more insulating, prompted the new study.

"Other researchers considered the role of ZPV in Peierls-active systems, even carbyne itself, before we did," Artyukhov said. "However, in all previous studies only two possible answers were being considered: either 'carbyne is semiconducting' or 'carbyne is metallic,' and the conclusion, whichever one, was viewed as sort of a timeless mathematical truth, a static 'ultimate verdict.' What we realized here is that you can use tension to dynamically go from one regime to the other, which makes it useful on a completely different level."

Yakobson noted the findings should encourage more research into the formation of stable chains and may apply equally to other one-dimensional chains subject to Peierls distortions, including conducting polymers and charge/spin density-wave materials.

Explore further: Triazine-based, graphitic carbon nitride as novel two-dimensional semiconductor

More information: Nano Letters, pubs.acs.org/doi/abs/10.1021/nl5017317

add to favorites email to friend print save as pdf

Related Stories

Carbyne is stronger than any known material

Aug 20, 2013

(Phys.org) —A paper on Arxiv presents a detailed look at the properties of carbyne, stronger than graphene and diamond, a true supermaterial. The paper is titled, "Carbyne from first principles: Chain ...

Dreidel-like dislocations lead to remarkable properties

Dec 14, 2012

(Phys.org)—A new material structure predicted at Rice University offers the tantalizing possibility of a signal path smaller than the nanowires for advanced electronics now under development at Rice and ...

Scientists characterize carbon for batteries

Jul 14, 2014

Lithium-ion batteries could benefit from a theoretical model created at Rice University and Lawrence Livermore National Laboratory that predicts how carbon components will perform.

Recommended for you

'Mind the gap' between atomically thin materials

5 hours ago

In subway stations around London, the warning to "Mind the Gap" helps commuters keep from stepping into empty space as they leave the train. When it comes to engineering single-layer atomic structures, minding ...

Paper electronics could make health care more accessible

Nov 19, 2014

Flexible electronic sensors based on paper—an inexpensive material—have the potential to some day cut the price of a wide range of medical tools, from helpful robots to diagnostic tests. Scientists have ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.