Neutrons and X-rays reveal structure of high-temperature liquid metal oxides

Jun 02, 2014 by Katie Bethea
A metal oxide drop levitated in a flow of gas is being heated from above with a laser beam so that researchers can study the behavior of this class of ceramics under high temperatures.

(Phys.org) —By levitating a bead of ceramic oxide, heating it with a 400-watt carbon dioxide laser, then shooting the molten material with X-rays and neutrons, scientists with the Department of Energy's Oak Ridge and Argonne national laboratories have revealed unprecedented detail of the structure of high-temperature liquid oxides.

This class of ceramics is often used to resist high temperatures, but its behavior under is also critical for understanding the evolution of planetary bodies, nuclear meltdown scenarios, and glass formation.

In a study published in Physical Review Letters, researchers from Stony Brook University joined forces with colleagues at Oak Ridge and Argonne scientific user facilities to study the structure and properties of high melting point non-glass forming oxide liquids, such as yttrium and holmium oxides.

The research team observed a general trend towards lower metal and oxygen coordination in a wide range of oxide melts, suggesting that this behavior is a widely occurring phenomenon. The structure of oxide melts determines most of their , which in turn are directly relevant to planetary research as well as glass making and crystal growth processes including laser garnets and display phosphors.

"In principle, with this knowledge we could make new families of materials by capturing unusual structural motifs present in the melt that don't occur in the crystal," said Chris Benmore, physicist at Argonne's Advanced Photon Source. "We want to find out how to stabilize that structure – maybe by adding components or through vitrifying the melt – and end up with same material, but with different properties."

By combining the analysis of separate X-ray and neutron diffraction experiments, the researchers made the first determination of the complete set of pair distribution functions for a high temperature oxide melt, which gives element-specific information on the probability of finding two atoms with a given separation distance. These separation probabilities provide specific information on local coordination and connectivity, such as between the metal and oxygen atoms, which helps scientists understand physical properties such as density, viscosity, and conductivity.

"Neutrons show us the oxygens in the material clearly, while X-rays reveal the cations [positively charged atoms]," said Benmore. "If you want to extract the detailed structure, you need both techniques."

Joerg Neuefeind, instrument scientist at Oak Ridge's Spallation Neutron Source, said, "There's no way with one experiment to get that information." Neuefeind explained that the experiment required not only collaboration among the two DOE labs, but also a unique sample environment to reach temperatures exceeding 3,000 degrees kelvin, or almost 5,000 degrees Fahrenheit.

For perspective, Neuefeind added, steel melts at approximately 2,600 degrees Fahrenheit, while 6,700 degrees Fahrenheit is the melting point of diamond and 10,300 degrees Fahrenheit is the surface temperature of the sun.

The sample environment where the liquid metal oxide was measured involves a levitation system and a laser. The levitation system is made of a special nozzle designed to produce a gas flow that can trap a small bead of material–about an eighth of an inch in diameter─ "floating in air" above the nozzle. The levitation ensures the sample is not in contact with any solid surface that would melt, react with, and contaminate the sample at these temperatures, while a laser is used to heat the sample as it floats on the gas flow. Richard Weber, owner of Materials Development Inc. in Arlington Heights, Illinois, has collaborated with this research team for many years to develop the levitation system and optimize the method.

Explore further: A potential candidate for more efficient solid oxide bismuth and iridium fuel cells

add to favorites email to friend print save as pdf

Related Stories

A 'sponge' path to better catalysts and energy materials

Sep 10, 2013

Scientists from the U.S. Department of Energy (DOE) Office of Science's Oak Ridge (ORNL) and Argonne National Laboratories, Northwestern University, and Hokkaido University (Japan) have developed a new oxygen ...

Researchers turn cement into metal

May 27, 2013

(Phys.org) —In a move that would make the Alchemists of King Arthur's time green with envy, scientists have unraveled the formula for turning liquid cement into liquid metal. This makes cement a semi-conductor ...

Magnesium oxide: From Earth to super-Earth

Nov 22, 2012

The mantles of Earth and other rocky planets are rich in magnesium and oxygen. Due to its simplicity, the mineral magnesium oxide is a good model for studying the nature of planetary interiors. New work from ...

Recommended for you

New filter could advance terahertz data transmission

Feb 27, 2015

University of Utah engineers have discovered a new approach for designing filters capable of separating different frequencies in the terahertz spectrum, the next generation of communications bandwidth that ...

The super-resolution revolution

Feb 27, 2015

Cambridge scientists are part of a resolution revolution. Building powerful instruments that shatter the physical limits of optical microscopy, they are beginning to watch molecular processes as they happen, ...

Precision gas sensor could fit on a chip

Feb 27, 2015

Using their expertise in silicon optics, Cornell engineers have miniaturized a light source in the elusive mid-infrared (mid-IR) spectrum, effectively squeezing the capabilities of a large, tabletop laser onto a 1-millimeter ...

A new X-ray microscope for nanoscale imaging

Feb 27, 2015

Delivering the capability to image nanostructures and chemical reactions down to nanometer resolution requires a new class of x-ray microscope that can perform precision microscopy experiments using ultra-bright ...

New research signals big future for quantum radar

Feb 26, 2015

A prototype quantum radar that has the potential to detect objects which are invisible to conventional systems has been developed by an international research team led by a quantum information scientist at the University ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.