Researchers optimizing graphene for various applications

May 14, 2014 by Alexander Stirn
Graphene particles should be the starting products for chemical reactions to create higher performance batteries, more flexible touchscreens and more efficient catalysts. Credit: National Center for Nanoscience and Technology

(Phys.org) —A material cannot get any thinner. Graphene consists of just one layer of carbon atoms. However, that's not the only reason materials scientists are interested in this material: they're primarily fascinated by its extraordinary properties. Linjie Zhi and his Partner Group at the Max Planck Institute for Polymer Research are using chemistry to optimize graphene for various applications.

Graphene, a gossamer-thin layer of carbon with a structure reminiscent of chicken wire, is the jack of all trades of materials research. It's just one atomic layer thick, in the laboratory is 200 times as strong as steel, conducts electricity 100 times better than silicon, is as flexible as a plastic, and in individual layers is almost as transparent as glass. Physicists and are excited. But scientists from other disciplines are showing little interest.

Quite wrong, believes Linjie Zhi: "So far, scientific research has almost exclusively concentrated on the physical properties of , but its chemical behavior is at least as exciting", says the chemist. Zhi, who, at the National Center for Nanoscience and Technology in Beijing, heads the 'Carbon-rich Nanomaterials' Partner Group of the Max Planck Institute for Polymer Research in Mainz is using the material's chemistry to optimize its properties for specific applications.

In his lab on the eighth floor of the National Center for Nanoscience and Technology in Beijing, there are countless vials holding what at first glance look to be nondescript contents. The containers are neatly labeled – in a mixture of numbers and Chinese characters. Their contents are mainly deep black, but sometimes also rust brown because, in large numbers, the graphene sheets absorb a lot of light. Most of the vials contain a powder; a few, however, hold a thick, dark liquid.

All of the substances, though, are graphene particles in different forms and compositions. They are intended for use as starting products for chemical reactions to create higher performance batteries, more flexible touchscreens and more efficient catalysts. "Fundamentally, graphene is nothing more than an extremely interesting building block for new applications", says Zhi.

His interest in the wonder material, the first experimental production of which was awarded a Nobel Prize in 2010, goes a long way back: After gaining his doctorate in coal chemistry, Zhi worked for five years in Klaus Müllen's Synthetic Chemistry Group at the Max Planck Institute for Polymer Research where he got to know and love graphene. "After a few years, we worked out that, by using the correct strategy, graphene can be used to produce highly promising materials with unique properties", says the chemist.

When Zhi returned to China in 2008 and set up his own working group, this knowledge was not all that he took back with him - he had his contacts in Germany too. "It simply made sense to put Professor Müllen's experience of synthesis together with Professor Zhi's materials expertise in a Partner Group", says Manfred Wagner, who coordinates Sino-German activities in Mainz.

The graphene platelets used in Zhi's laboratory as a material for all kinds of applications consist of just a few hundred, sometimes also a few thousand, carbon atoms. By themselves, however, the two-dimensional molecules, which can be up to ten nanometers in size, show little interest in combining with one another. They are like Lego bricks without the knobs.

But it's a different story once the graphene has been chemically treated. One highly promising approach, which the chemists in Klaus Müllen's team have already been investigating for some time, involves incorporating other atoms or groups of atoms at precisely defined locations in the graphene structure: nitrogen, oxygen or a hydroxyl group consisting of oxygen and hydrogen have different levels of chemical activity and also behave differently from carbon. If they are placed in the correct location, the reaction potential of the graphene block is modified at that point, resulting in the formation of virtual knobs. Larger structures can now be assembled.

The only snag is getting the chemically active groups or atoms into the correct position. "The right reaction conditions are absolutely vital", says Linjie Zhi. Temperature, pressure, pH, the composition of the solution or the atmosphere in which the reaction takes place, determine the ultimate result. "Chemical bonds often form under precisely defined conditions, which means that we can select the exact position of our molecules", says Zhi.

The conditions also have to be right for the next step: chemical assembly of the manipulated graphene. If the conditions are right, structures with surprising properties can ultimately be obtained - for example, for novel batteries: Today's lithium ion batteries use graphite as the anode (which is the name physicists give to the electrode that accepts negatively charged particles), a form of carbon which basically consists of thousands of layers of graphene. "These layers are, however, too stretched out for efficient applications", says Zhi. Ions cannot readily penetrate, and charging and discharging the batteries takes a very long time.

The situation is different for the graphene platelets produced in Beijing: they are large enough to conduct electricity well, but not so large that the ions can no longer gain easy access to the material. In order to build better batteries, Zhi and his team are placing the chemically modified building blocks in a kind of tunnel that is only a few nanometers in size. In the tunnel, columns of perfectly ordered graphene layers form which can, in turn, be processed to form a porous electrode. Since the columns are extremely thin, the negatively charged battery ions can readily release their charge.

"While today it can take eight to ten hours to charge an electric car, with our batteries it would only take an hour", says Zhi. What this new technique can really achieve is currently being investigated in the laboratory next door where dozens of self-fabricated batteries, looking like button cells wrapped in plastic film, are hanging from measuring instruments and running through test cycles. The initial results sound encouraging.

Another room accommodates the other major experiment which the Partner Group is currently working on: flexible touchscreens with graphene electrodes. Today's smartphones mainly use electrical contacts of indium-tin oxide in their touch-sensitive screens, which is a brittle material whose price has risen meteorically in recent years due to dwindling supplies of indium.

Graphene, which is simultaneously conductive, transparent and flexible, has already long been considered a highly promising alternative. What has been lacking so far though is a production process which is capable of producing the films at low cost, in high quality and on a large scale. In the currently preferred method, chemical vapor deposition (CVD), are deposited for example on a metallic surface where they form a thin graphene film. However, this then has to be transferred onto a support film which is costly and often impairs quality.

On the eighth floor of the National Center for Nanoscience and Technology, Zhi and his colleagues are betting on chemistry being the answer: the Beijing-based researchers take graphite, convert it into graphene oxide, produce a thin film of it on a polyethylene film and then drive the oxygen out of the graphene oxide in a chemical reaction known as reduction. However, the resultant films are often of poor quality with lots of defects.

A small production line in Linjie Zhi's laboratory shows that things can turn out differently. At the start of the line, there is the neatly rolled, untreated film. At the end are installations for treating the finished product. The actual reaction takes place in the middle, in a nondescript brown box, which is also where the most work is necessary: "Basically, it's a matter of finding the correct selection process", says Linjie Zhi. "We need reliable building blocks that are as large as possible, work as well as possible, and have the fewest possible defects."

After three years as a Partner Group of the Max Planck Institute for Polymer Research, the results have now become "extremely promising", says Zhi. The graphene films produced by the small production line have acceptable quality, transparency and conductivity. Above all, however, they are distinctly cheaper than competing products obtained by vapor deposition.

This has attracted industrial interest. Initial negotiations with companies wishing to make use of the new technology on a commercial scale are already under way.

Explore further: Physicists show unlimited heat conduction in graphene

add to favorites email to friend print save as pdf

Related Stories

Physicists show unlimited heat conduction in graphene

May 13, 2014

Scientists at the Max Planck Institute for Polymer Research (MPI-P) in Mainz and the National University of Singapore have attested that the thermal conductivity of graphene diverges with the size of the ...

Making graphene in your kitchen

Apr 20, 2014

Graphene has been touted as a wonder material—the world's thinnest substance, but super-strong. Now scientists say it is so easy to make you could produce some in your kitchen.

Turning graphite into diamond

Mar 28, 2014

(Phys.org) —A research team led by SLAC scientists has uncovered a potential new route to produce thin diamond films for a variety of industrial applications, from cutting tools to electronic devices to ...

The mechanism of caesium intercalation of graphene

Feb 21, 2014

Properties of many layered materials, including copper- and iron-based superconductors, topological insulators, graphite and epitaxial graphene, can be manipulated by the inclusion of different atomic and ...

Flexible, semi-transparent ultrathin solar cells

Mar 09, 2014

A lot of research has been done on graphene recently—carbon flakes, consisting of only one layer of atoms. As it turns out, there are other materials too which exhibit remarkable properties if they are ...

Recommended for you

The simplest element: Turning hydrogen into 'graphene'

Dec 16, 2014

New work from Carnegie's Ivan Naumov and Russell Hemley delves into the chemistry underlying some surprising recent observations about hydrogen, and reveals remarkable parallels between hydrogen and graphene ...

Future batteries: Lithium-sulfur with a graphene wrapper

Dec 16, 2014

What do you get when you wrap a thin sheet of the "wonder material" graphene around a novel multifunctional sulfur electrode that combines an energy storage unit and electron/ion transfer networks? An extremely ...

User comments : 1

Adjust slider to filter visible comments by rank

Display comments: newest first

AndyGibson
not rated yet May 15, 2014
The picture which accompanies this article isn't graphene.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.