High-strengh materials created under pressure

Mar 18, 2014
"Microflowers" made of PPPI, the world's most mechanically stable organic polymer. The blossoms are approximately five microns wide.

At Vienna University of Technology, materials for lightweight construction, protective clothing or sports equipment can be produced at high temperatures and high pressures. This process is faster, better and more eco-friendly than other techniques.

The earth's crust works like a pressure cooker. Minerals typically do not form under standard conditions, but at high temperatures and pressures. However, an environment of extreme heat and pressure has been considered to be absolutely unsuitable for organic molecules. Scientists at Vienna University of Technology found out that under such seemingly hostile conditions, organic materials with remarkable material properties can be synthesized – for instance Kevlar, an extremely versatile high-performance material.

Steam Instead of Toxins 

It seems counterintuitive: one might expect large, to be destroyed by heat and high pressure. But at 200 degrees Celsius and 17 bars, Miriam Unterlass and her team at TU Vienna have synthesized organic polymers, which are usually extremely hard to create and require highly toxic additives.  Instead of hazardous solvents, the team at TU Vienna uses nothing but harmless water vapour, making the new method extremely eco-friendly.

The principle of so-called "hydrothermal synthesis" is well known from geology. Many gemstones only form deep down in the ground, in high-pressure water reservoirs. In contrast to these inorganic minerals, which are often mainly made up of silicon and metal ions, many high-performance materials are organic. They primarily consist of carbon and hydrogen.

The Unterlass team is preparing an experiment with the reactpr and the infrared probe (Catarina I.O. Martins, Sofia Torres Venegas und Daniel A. Cerrón Infantes, left to right)

Kevlar is an example of such a high-performance polymer. It is extraordinarily robust and it is used for or for construction elements that are supposed to withstand extreme strain. Such materials also play an important role in aircraft construction, because they are much lighter than any metal parts with comparable properties. Organic high-performance polymers are huge organic molecules with a very stiff structure, kept in place by a multitude of bonds between the atoms.

Extremely Durable, but Hard to Synthesize

Such durable materials, however, are very hard to synthesize: "We have to deal with two contradictory requirements", Miriam Unterlass explains. "On the one hand, we want to have rigid materials which do not dissolve and do not melt even at . On the other hand, this means that we cannot just dissolve and then crystalize them, as we would if we were dealing with simple rock salt, for example." The technique developed at TU Vienna works quite differently: the polymers are forming and are crystallizing simultaneously, uniquely supported by hydrothermal conditions.

There are many advantages to this procedure: no dangerous byproducts are created, the energy consumption is dramatically reduced, and the synthesis in the pressure reactor is much faster than it would be using any other techniques. Also, the final product is better: "Our method yields materials with higher crystallinity, which further improves the mechanical rigidity", says Miriam Unterlass.

Sofia Torres Venegas.

Looking Inside with Infrared Light

Fine-tuning of the process is complicated, however. Mass and energy transport inside the reactor have to be very well known to understand exactly what is taking place. Of course the pressured rector cannot just by opened during the reaction to see what is happening. Therefore, a special infrared probe is used, which can easily withstand the extreme conditions inside the reactor. "When we put the probe inside the reactor, we can follow in real-time what happens inside, without having to draw any samples", Unterlass explains.

With the new high-temperature IR-probe – it is one of only two such devices worldwide –  it will become easier to develop even more synthetic techniques. The team has plenty of ideas: "There is a plethora of which promise great material properties if we manage to polymerize them", says Miriam Unterlass.

Explore further: Electricity from waste heat with more efficient materials

add to favorites email to friend print save as pdf

Related Stories

Electricity from waste heat with more efficient materials

Dec 05, 2013

Thermoelectric materials can convert waste heat directly into electricity. Tommi Tynell, M.Sc., who is a doctoral candidate at the Aalto University School of Chemical Technology, has developed hybrid thermoelectric materials ...

Organic chemistry: Carbon dioxide tamed

Jan 15, 2014

Carbon dioxide has become notorious as a troublesome greenhouse gas produced by burning fossil fuels. Now, this gas could also offer a cheap, abundant and nontoxic source of carbon for the chemical reactions ...

Flexible, semi-transparent ultrathin solar cells

Mar 09, 2014

A lot of research has been done on graphene recently—carbon flakes, consisting of only one layer of atoms. As it turns out, there are other materials too which exhibit remarkable properties if they are ...

Synthesis of superconducting solid picene

Dec 18, 2013

Research by Professor Yoshihiro Kubozono at Okayama University has potential for innovative applications of solid picene and organic superconductors, graphene and other functional materials.

Recommended for you

How the hummingbird achieves its aerobatic feats

40 minutes ago

(Phys.org) —The sight of a tiny hummingbird hovering in front of a flower and then darting to another with lightning speed amazes and delights. But it also leaves watchers with a persistent question: How ...

New terahertz device could strengthen security

Nov 21, 2014

We are all familiar with the hassles that accompany air travel. We shuffle through long lines, remove our shoes, and carry liquids in regulation-sized tubes. And even after all the effort, we still wonder if these procedures ...

CERN makes public first data of LHC experiments

Nov 21, 2014

CERN today launched its Open Data Portal where data from real collision events, produced by experiments at the Large Hadron Collider (LHC) will for the first time be made openly available to all. It is expected ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.