Catheter innovation destroys dangerous biofilms

Mar 25, 2014
Catheter innovation destroys dangerous biofilms
An artistic configuration of catheters in various stages of being clogged by biofilm. Credit: Duke University

For the millions of people forced to rely on a plastic tube to eliminate their urine, developing an infection is nearly a 100 percent guarantee after just four weeks. But with the help of a little bubble-blowing, biomedical engineers hope to bring relief to urethras everywhere.

About half of the time, the interior of long-term become plagued by biofilms—structures formed by colonies of bacteria that are extremely difficult to kill. Once established, it is only a matter of time before the becomes a welcoming host for other, more dangerous bacteria or begins to choke urine drainage, causing leakage—or even trauma to the patient's body.

Duke University engineers have developed a new urinary catheter design that can eliminate nearly all of the hard-to-kill biofilm from the catheter's walls. Instead of focusing on expensive antibacterial coatings, the researchers use physical deformation to knock the infectious film from its moorings.

"A biofilm is like a city that protects and harbors harmful bacteria," said Vrad Levering, a PhD student in biomedical engineering. "Our solution is like an earthquake that demolishes the infrastructure, leaving the rubble to be easily washed away by a flood of urine."

The study appears online March 25 in Advanced Healthcare Materials.

One in five people admitted to the hospital requires a urinary catheter, contributing to the more than 30 million used each year in the United States. These catheters are the number-one cause of hospital-acquired infections in the United States.

The yellow cast of an innovative new catheter design created by a 3D printer is shown on the left along with the finished prototype on the right. The markings indicate the urinary duct (U), the flexible inner wall (i.w.) between the urinary duct and the inflation channel (I) and the stiff exterior wall (e.w.). Pressurizing the narrow chamber deforms the main channel, dislodging biofilm so that it can be flushed from the tube. Credit: Duke University

Outside of the hospital, catheters are also commonly required by paralysis victims and the immobile elderly. And with an aging population, the use of catheters is likely to increase in coming decades.

For years, researchers have focused on developing antimicrobial treatments to stop the formation of biofilms, but as the statistics indicate, they have yet to find an affordable, effective solution. Besides the costs and technical challenges, many doctors fear antimicrobial solutions would promote the evolution of antibiotic-resistant superbugs.

So Duke engineers decided to think outside of the cylinder.

This series of photos demonstrates how an innovative new catheter can be kept free of biofilms. When biofilm builds inside the catheter (denoted by the pink substance in the left image), pressure is forced through the neighboring channel (the dotted line in the left image and the expanded 'P' space in the central graphic) causing it to rapidly expand into the main shaft. The result is the dislodging of the biofilm, as evident in the final image. Credit: Duke University

"We ran experiments showing that if you stretch an elastic piece of rubber at a proper rate, you can pop various types of sticky biofilms right off of its surface," said Xuanhe Zhao, professor of mechanical engineering and materials science, whose team partnered with that of Gabriel Lopez, professor of .

"Those tests were initially aimed at cleaning submerged surfaces in marine environments, but the principle has many possible applications," continued Lopez. "So we thought, why not catheters?"

Their first model features a single channel that can be inflated with liquid or air running parallel to the main urinary tract, with nothing but a thin, flexible barrier between the two. Pushing liquid through the small inflation channel forces the thin wall into the urinary tract while leaving the outer dimensions of the catheter intact.

This video is not supported by your browser at this time.
This prototype catheter has been rinsed for 20 seconds without removing the biofilm. Pressurizing the inflation channel with water deforms the main channel, dislodging the white biofilm which is then flushed from the channel by the regular flow. Credit: Duke University

A prototype molded from a 3D printed form worked beautifully, Levering said. The sudden deformation unseated more than 90 percent of the biofilm, which was washed away by a flow matching the slow movement of urine. Biofilm on the wall opposite the inflation channel was mostly unharmed, but the collaborative team has plans to produce a new prototype with inflation channels running along both sides of the main channel.

Lopez believes the demonstration is a clear proof-of-principle that their simple mechanical solution could revolutionize the catheter industry. Because the design would have low implementation costs, closely adheres to the dimensions of current catheters and would be easy for medical clinicians to operate, the team hopes to bring it to market and is currently searching for partners.

"There are more than 30 million of these used every year," said Levering. "And for a technology that has changed very little in 50 years, the problem is kind of atrocious. We hope we have found a solution."

Levering said the general concept has potential applications for a wide range of industries currently plagued by biofilms, such as dairy processing, petroleum transport, city drinking water and heat exchangers.

"We don't want to get in over our heads, but there are lots of other places where biofilms are severe problems," said Levering. "It's a multi-billion-dollar-per-year problem for sea water filtration alone. There are definitely other potential markets out there."

Explore further: Antibiotic use to treat catheter-associated bacteriuria futile in decreasing risk of mortality

More information: "Soft Robotic Concepts in Catheter Design: an On-demand Fouling-release Urinary Catheter," Levering, V., Wang, Q., Shivapooja P., Zhao, X., Lopez, G.P. Advanced Healthcare Materials, 2014. DOI: 10.1002/ADHM.201400035

add to favorites email to friend print save as pdf

Related Stories

Antimicrobial catheters could save NHS millions

Mar 27, 2012

A new catheter coating that reduces bacterial attachment to its surface is being developed by scientists who are reporting their work at the Society for General Microbiology's Spring Conference in Dublin this ...

New long-term antimicrobial catheter developed

Sep 03, 2012

A novel antimicrobial catheter that remains infection-free for up to twelve weeks could dramatically improve the lives of long-term catheter users. The scientists who have developed the new technology are presenting their ...

Potential new strategy to reduce catheter blockage

Apr 13, 2011

Bacterial genes that make urine less acidic could be good targets to prevent catheter blockage, according to research presented at the Society for General Microbiology's Spring Conference in Harrogate. The ...

Recommended for you

Proteins: New class of materials discovered

Aug 22, 2014

Scientists at the Helmholtz Center Berlin along with researchers at China's Fudan University have characterized a new class of materials called protein crystalline frameworks.

The fluorescent fingerprint of plastics

Aug 21, 2014

LMU researchers have developed a new process which will greatly simplify the process of sorting plastics in recycling plants. The method enables automated identification of polymers, facilitating rapid separation ...

Water and sunlight the formula for sustainable fuel

Aug 21, 2014

An Australian National University (ANU) team has successfully replicated one of the crucial steps in photosynthesis, opening the way for biological systems powered by sunlight which could manufacture hydrogen ...

Researchers create engineered energy absorbing material

Aug 21, 2014

(Phys.org) —Materials like solid gels and porous foams are used for padding and cushioning, but each has its own advantages and limitations. Gels are effective as padding but are relatively heavy; gel performance ...

User comments : 0