New 'pomegranate-inspired' design solves problems for lithium-ion batteries

Feb 16, 2014
A novel battery electrode features silicon nanoparticles clustered like pomegranate seeds in a tough carbon rind. (This is an artistic concept, not representative of the actual battery.) Credit: Greg Stewart/SLAC

with silicon nanoparticles clustered like seeds in a tough carbon rind – overcomes several remaining obstacles to using silicon for a new generation of lithium-ion batteries, say its inventors at Stanford University and the Department of Energy's SLAC National Accelerator Laboratory.

"While a couple of challenges remain, this design brings us closer to using anodes in smaller, lighter and more powerful batteries for products like cell phones, tablets and electric cars," said Yi Cui, an associate professor at Stanford and SLAC who led the research, reported today in Nature Nanotechnology.

"Experiments showed our pomegranate-inspired anode operates at 97 percent capacity even after 1,000 cycles of charging and discharging, which puts it well within the desired range for commercial operation."

The anode, or negative electrode, is where energy is stored when a battery charges. Silicon anodes could store 10 times more charge than the graphite anodes in today's rechargeable , but they also have major drawbacks: The brittle silicon swells and falls apart during battery charging, and it reacts with the battery's electrolyte to form gunk that coats the anode and degrades its performance.

Over the past eight years, Cui's team has tackled the breakage problem by using silicon nanowires or that are too small to break into even smaller bits and encasing the nanoparticles in carbon "yolk shells" that give them room to swell and shrink during charging.

Left: Silicon nanoparticles are encased in carbon "yolk shells" and clustered like seeds in a pomegranate. Each cluster has a carbon rind that holds it together, conducts electricity and minimizes reactions with the battery's electrolyte that can degrade performance. Credit: Nian Liu, Zhenda Lu and Yi Cui/Stanford

The new study builds on that work. Graduate student Nian Liu and postdoctoral researcher Zhenda Lu used a microemulsion technique common in the oil, paint and cosmetic industries to gather silicon yolk shells into clusters, and coated each cluster with a second, thicker layer of carbon. These carbon rinds hold the pomegranate clusters together and provide a sturdy highway for electrical currents.

And since each pomegranate cluster has just one-tenth the surface area of the individual particles inside it, a much smaller area is exposed to the electrolyte, thereby reducing the amount of gunk that forms to a manageable level.

Although the clusters are too small to see individually, together they form a fine black powder that can be used to coat a piece of foil and form an anode. Lab tests showed that pomegranate anodes worked well when made in the thickness required for commercial battery performance.

By precisely controlling the process used to make them, Stanford and SLAC researchers can produce pomegranate clusters of a specific size for silicon battery anodes. Credit: Nian Liu, Zhenda Lu and Yi Cui/Stanford

While these experiments show the technique works, Cui said, the team will have to solve two more problems to make it viable on a commercial scale: They need to simplify the process and find a cheaper source of silicon nanoparticles. One possible source is rice husks: They're unfit for human food, produced by the millions of tons and 20 percent by weight. According to Liu, they could be transformed into pure relatively easily, as his team recently described in Scientific Reports.

"To me it's very exciting to see how much progress we've made in the last seven or eight years," Cui said, "and how we have solved the problems one by one."

Explore further: Inexpensive material boosts battery capacity

More information: A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes, N. Liu, Z. Lu et al., Nature Nanotechnology, 16 February 2014. DOI: 10.1038/nnano.2014.6

add to favorites email to friend print save as pdf

Related Stories

New nanostructure for batteries keeps going and going

May 11, 2012

(Phys.org) -- For more than a decade, scientists have tried to improve lithium-based batteries by replacing the graphite in one terminal with silicon, which can store 10 times more charge. But after just a ...

Inexpensive material boosts battery capacity

Oct 23, 2013

Battery-powered cars offer many environmental benefits, but a car with a full tank of gasoline can travel further. By improving the energy capacity of lithium-ion batteries, a new electrode made from iron ...

Lifting the lid on silicon batteries

Feb 04, 2014

(Phys.org) —Resolving the mystery of what happens inside batteries when silicon comes into contact with lithium could accelerate the commercialisation of next-generation high capacity batteries, for use ...

Scientists invent self-healing battery electrode

Nov 17, 2013

Researchers have made the first battery electrode that heals itself, opening a new and potentially commercially viable path for making the next generation of lithium ion batteries for electric cars, cell ...

Recommended for you

Twisted graphene chills out

Sep 17, 2014

(Phys.org) —When two sheets of graphene are stacked in a special way, it is possible to cool down the graphene with a laser instead of heating it up, University of Manchester researchers have shown.

Researchers use liquid inks to create better solar cells

Sep 17, 2014

(Phys.org) —The basic function of solar cells is to harvest sunlight and turn it into electricity. Thus, it is critically important that the film that collects the light on the surface of the cell is designed ...

User comments : 0