Cochlear implants—with no exterior hardware

Feb 09, 2014 by Larry Hardesty
Credit: Massachusetts Institute of Technology

Cochlear implants—medical devices that electrically stimulate the auditory nerve—have granted at least limited hearing to hundreds of thousands of people worldwide who otherwise would be totally deaf. Existing versions of the device, however, require that a disk-shaped transmitter about an inch in diameter be affixed to the skull, with a wire snaking down to a joint microphone and power source that looks like an oversized hearing aid around the patient's ear.

Researchers at MIT's Microsystems Technology Laboratory (MTL), together with physicians from Harvard Medical School and the Massachusetts Eye and Ear Infirmary (MEEI), have developed a new, low-power signal-processing chip that could lead to a cochlear implant that requires no external hardware. The implant would be wirelessly recharged and would run for about eight hours on each charge.

The researchers describe their chip in a paper they're presenting this week at the International Solid-State Circuits Conference. The paper's lead author—Marcus Yip, who completed his PhD at MIT last fall—and his colleagues Rui Jin and Nathan Ickes, both graduate students in MIT's Department of Electrical Engineering and Computer Science, will also exhibit a prototype charger that plugs into an ordinary cell phone and can recharge the signal-processing chip in roughly two minutes.

"The idea with this design is that you could use a phone, with an adaptor, to charge the cochlear implant, so you don't have to be plugged in," says Anantha Chandrakasan, the Joseph F. and Nancy P. Keithley Professor of Electrical Engineering and corresponding author on the new paper. "Or you could imagine a smart pillow, so you charge overnight, and the next day, it just functions."

Adaptive reuse

Existing cochlear implants use an external microphone to gather sound, but the new implant would instead use the natural microphone of the , which is almost always intact in cochlear-implant patients.

The researchers' design exploits the mechanism of a different type of medical device, known as a middle-ear implant. Delicate bones in the middle ear, known as ossicles, convey the vibrations of the eardrum to the cochlea, the small, spiral chamber in the inner ear that converts acoustic signals to electrical. In patients with middle-ear implants, the cochlea is functional, but one of the ossicles—the stapes—doesn't vibrate with enough force to stimulate the auditory nerve. A middle-ear implant consists of a tiny sensor that detects the ossicles' vibrations and an actuator that helps drive the stapes accordingly.

The new device would use the same type of sensor, but the signal it generates would travel to a microchip implanted in the ear, which would convert it to an electrical signal and pass it on to an electrode in the cochlea. Lowering the power requirements of the converter chip was the key to dispensing with the skull-mounted hardware.

Chandrakasan's lab at MTL specializes in low-power chips, and the new converter deploys several of the tricks that the lab has developed over the years, such as tailoring the arrangement of low-power filters and amplifiers to the precise acoustic properties of the incoming signal.

But Chandrakasan and his colleagues also developed a new signal-generating circuit that reduces the chip's power consumption by an additional 20 to 30 percent. The key was to specify a new waveform—the basic electrical signal emitted by the chip, which is modulated to encode acoustic information—that is more power-efficient to generate but still stimulates the in the appropriate way.

Verification

The waveform was based on prior research involving simulated nerve fibers, but the MIT researchers tailored it for cochlear implants and found a low-power way to implement it in hardware. Two of their collaborators at MEEI—Konstantina Stankovic, an ear surgeon who co-led the study with Chandrakasan, and Don Eddington—tested it on four patients who already had and found that it had no effect on their ability to hear. Working with another collaborator at MEEI, Heidi Nakajima, the researchers have also demonstrated that the chip and sensor are able to pick up and process speech played into a the middle ear of a human cadaver.

Explore further: Computer models of neuronal sound processing in the brain lead to cochlear implant improvements

More information: Archive: Implantable medical devices powered by the ear itself: phys.org/news/2012-11-implanta… ces-powered-ear.html

Related Stories

Implantable medical devices powered by the ear itself

Nov 07, 2012

Deep in the inner ear of mammals is a natural battery—a chamber filled with ions that produces an electrical potential to drive neural signals. In today's issue of the journal Nature Biotechnology, a team ...

New strategy lets cochlear implant users hear music

Oct 09, 2013

For many, music is a universal language that unites people when words cannot. But for those who use cochlear implants—technology that allows deaf and hard of hearing people to comprehend speech—hearing ...

A middle-ear microphone

Apr 30, 2012

(Medical Xpress) -- Cochlear implants have restored basic hearing to some 220,000 deaf people, yet a microphone and related electronics must be worn outside the head, raising reliability issues, preventing ...

Recommended for you

Study says upgrading infrastructure could reduce flood damage

23 hours ago

The severe flooding that devastated a wide swath of Colorado last year might have been less destructive if the bridges, roads and other infrastructure had been upgraded or modernized, according to a new study from the University ...

Walk through buildings from your own device

Oct 29, 2014

Would you like to visit The Frick Collection art museum in New York City but can't find the time? No problem. You can take a 3-D virtual tour that will make you feel like you are there, thanks to Yasutaka ...

'Ambulance drone' prototype unveiled in Holland

Oct 28, 2014

A Dutch-based student on Tuesday unveiled a prototype of an "ambulance drone", a flying defibrillator able to reach heart attack victims within precious life-saving minutes.

Driverless subway line to be extended in Paris

Oct 28, 2014

The Paris public transportation company Régie Autonome des Transports Parisiens (RATP) is extending its network of driverless subways by six kilometers. Siemens will equip the new section of Line 14 with ...

User comments : 4

Adjust slider to filter visible comments by rank

Display comments: newest first

TheGhostofOtto1923
3 / 5 (2) Feb 09, 2014
Add some bluetooth and youve got permanent earbuds.
Skepticus_Rex
5 / 5 (1) Feb 09, 2014
Add a microcircuit with miniaturized supercapacitors and you could set something up like this to charge itself or to run and/or be charged entirely on the current created by the vibration on the device. Perhaps a sensitive, miniature piezoelectric module could be used for something like this as well. Even without such enhancements it's a little closer to the bionic ear of science fiction.
alfie_null
not rated yet Feb 10, 2014
Add a microcircuit with miniaturized supercapacitors and you could set something up like this to charge itself or to run and/or be charged entirely on the current created by the vibration on the device. Perhaps a sensitive, miniature piezoelectric module could be used for something like this as well. Even without such enhancements it's a little closer to the bionic ear of science fiction.

It would be nice to know the power requirements, whether this, or simple movement, or Peltier effect, etc. could so be utilized. The article, however, is a press release from a university, rigorously scrubbed clean of any technical info. University public affairs people are notorious for doing such.
evolution3
not rated yet Feb 10, 2014
Add some bluetooth and youve got permanent earbuds.

Everything is better with bluetooth...just joking. I don't think that this is a good solution. I mean its a good thing to make this device more effective and smaller, but the recharge issue needs a better solution. plugging in overnight? What about people with a very active sleep? Ripping the cable or some part of their skin off? I am not convinced. What a bout using the body for recharge? Or does this device still need too much energy?

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.