LCLS powers chain reaction of light: A new tool for X-ray studies

Dec 12, 2013 by Glenn Roberts Jr.
In this illustration, an X-ray pulse (shown in green) at SLAC's Linac Coherent Light Source strikes a neon atom (center) as it travels from the lower left. The intense incoming light reshuffles electrons out of their original positions and into vacant positions around the atom. When the electrons fall back into place, they re-emit the X-ray light at a slightly different energy. Those X-ray light bursts trigger a chain reaction in neighboring neon atoms that amplifies the X-ray light millions of times in the same direction (shown in yellow at upper right), providing a new, highly sensitive X-ray exploration technique. Credit: Gregory M. Stewart/SLAC

(Phys.org) —Researchers have found a new way to probe molecules and atoms with an X-ray laser, setting off cascading bursts of light that reveal precise details of what is going on inside. The technique may allow scientists to see details of chemical reactions and home in on the properties of specific elements within complex molecules in a way not possible before.

The experiment at SLAC's Linac Coherent Light Source demonstrated a new X-ray technique, called stimulated X-ray Raman scattering, in which samples absorb X-ray light and then emit it at a slightly different energy. The difference between the energy going in and the energy coming out tells scientists about the energy flow and other properties of individual atoms and elements in a molecule, which may ultimately reveal the earliest details of .

In the LCLS demonstration of this technique, reported Dec. 5 in Physical Review Letters, intense X-ray laser pulses triggered a that greatly amplified the X-ray signal, which normally is faint and difficult to detect.

"We showed that we could exponentially amplify the signal by millions of times," said Nina Rohringer of the Center for Free-Electron Laser Science (CFEL) in Germany, who coordinated the experimental and theoretical effort. "This shows that the X-ray laser could be a powerful new tool for resolving ultrafast changes in chemical bonds, as well as energy and charge transfers between atoms."

In the experiment, conducted in August 2011, researchers hit compressed neon gas with X-ray laser pulses, which caused electrons to move out of their positions close to the atomic nucleus and into open outer energy shells. When the electrons fell back into place, they slightly rearranged and spewed X-ray light at a slightly different energy. The emitted X-rays triggered a chain reaction of light bursts in neighboring atoms. All of these amplified X-rays were emitted in the same direction, making it easier to measure their energy.

The experiment builds upon an earlier effort at LCLS to create an "atomic laser" using a similar amplification effect.

SLAC's John Bozek, an LCLS staff scientist who participated in the experiment, said the technique is particularly useful for lighter elements that are difficult to measure using other X-ray techniques, and for studying how specific elements react to X-ray light.

Earlier forms of Raman scattering, which typically use visible, infrared or ultraviolet lasers, have many applications, Bozek said, including the study of batteries in action, catalysts at work in chemical reactions and electronic processes in exotic materials. X-ray lasers such as LCLS could bring a new level of precision to such studies by allowing researchers to focus on specific atoms and elements involved in a reaction and explore never-before-seen ultrafast chemical changes.

"People in materials science have been chasing this. You can really light up the properties you're interested in," Bozek said. "It drives the signal up enough that you can measure it in a relatively short time, and it gives you the specificity to pick out a nitrogen atom from a carbon atom very easily, for example. You could follow the energy and electronic charge flow in a molecule, and watch how the molecule rearranges its chemical bonds during this process."

Researchers also note that the technique might be used to explore complex processes at work in a light-driven chemical process such as photosynthesis, or to study a catalyst-driven chemical reaction triggered by laser light.

Rohringer said the aim is to adapt the new X-ray technique to resolve new details about excited states in more complex gases, as well as in liquids and solids, and to measure the timing of chemical changes and other transformations with quadrillionths-of-a-second precision. "We still have to develop the theory and the schemes for using this technique for solids and liquids," she said. "It is a science challenge at the moment."

The new technique could also possibly be used to study crystallized forms of biological proteins, she added. Her team is returning to LCLS in February for experiments that use multiple X-ray pulses of different wavelengths, or "colors," to better control and tune the X-ray scattering process. They also plan to study the timing of X-ray-triggered changes in molecules.

Explore further: New technique traces ejected electrons back to atomic shells

More information: Clemens Weninger, Michael Purvis, Duncan Ryan, Richard A. London, John D. Bozek, Christoph Bostedt, Alexander Graf, Gregory Brown, Jorge J. Rocca, and Nina Rohringer, "Stimulated Electronic X-Ray Raman Scattering." Phys. Rev. Lett. 111, 233902 (2013). DOI: 10.1103/PhysRevLett.111.233902

Related Stories

First atomic X-ray laser created

Jan 25, 2012

Scientists working at the U.S. Department of Energy's (DOE) SLAC National Accelerator Laboratory have created the shortest, purest X-ray laser pulses ever achieved, fulfilling a 45-year-old prediction and ...

A new tool to split X-ray laser pulses

Aug 08, 2013

(Phys.org) —A new tool at SLAC's Linac Coherent Light Source splits individual X-ray laser pulses into two pulses that can hit a target one right after another with precisely controlled timing, allowing ...

X-ray laser pulses in two colors

Mar 27, 2013

(Phys.org) —SLAC researchers have demonstrated for the first time how to produce pairs of X-ray laser pulses in slightly different wavelengths, or colors, with finely adjustable intervals between them – ...

X-rays capture electron 'dance'

Jan 31, 2013

(Phys.org)—The way electrons move within and between molecules, transferring energy as they go, plays an important role in many chemical and biological processes, such as the conversion of sunlight to energy ...

New X-ray tool proves timing is everything

Feb 20, 2013

(Phys.org)—With SLAC's Linac Coherent Light Source X-ray laser, timing is everything. Its pulses are designed to explore atomic-scale processes that are measured in femtoseconds, or quadrillionths of a ...

Recommended for you

How Paramecium protozoa claw their way to the top

21 hours ago

The ability to swim upwards – towards the sun and food supplies – is vital for many aquatic microorganisms. Exactly how they are able to differentiate between above and below in often murky waters is ...

User comments : 0