Engineer designs mug to keep coffee temperature just right

Dec 12, 2013 by Matt Shipman
Dean Verhoeven (left) and Logan Maxwell (right). Maxwell began tinkering with ideas for the Temperfect mug (in his hand) as an undergrad at NC State.

(Phys.org) —Some people think that university researchers are so occupied with their laboratories that they've lost sight of the world outside the ivory tower of academia. I would refer those people to Logan Maxwell, a researcher at NC State who has developed a coffee mug that will keep your coffee hot – but not too hot – for hours at a time. And what could be more practical than that?

"Our goal was to create a mug that will take piping hot coffee and cool it to a hot, but drinkable, – and keep it at that temperature for a long time," says Logan Maxwell, a research assistant at NC State and co-founder of Joeveo, the company that makes the "Temperfect" mug.

Maxwell came up with the idea as an undergraduate at NC State (he graduated in May 2013), and developed the first prototypes as part of his senior design project. The idea is fairly simple.

Maxwell's design is an insulated mug with three walls. Between the outer and middle walls is a vacuum, like a conventional insulated mug. But between the middle wall and the inner wall of the mug is a non-toxic chemical that we'll call "Material X." Material X is useful for putting into coffee mugs because it "melts" at 140 degrees Fahrenheit.

At room temperature, Material X is a solid. But when you pour hot coffee into the mug, the heat dissipates through the stainless steel inner wall of the mug and is absorbed by Material X, which becomes a liquid. This pulls the temperature of the coffee down to 140 degrees F. As the coffee cools, Material X releases its heat back through the lining of the mug – keeping the coffee hot.

"I did some research and found that most coffee is served at between 200 F and 185 F, and that coffee can burn you at any temperature above 140 F," Maxwell says. "So we set our 'ideal' temperature at 140 F."

The concept of a "phase-change" to keep beverages warm was patented in the 1960s, but never made it to the marketplace due to manufacturing difficulties. But Maxwell happened to meet an engineer named Dean Verhoeven who had already solved the manufacturing problem. Dean and Maxwell teamed up and Joeveo was born.

The two recently launched a Kickstarter campaign to finance an initial production run of Temperfect mugs, and reached their funding goal in less than two weeks. However, anyone interested in supporting the project (and getting one of the first mugs) can donate before Jan. 1, 2014.

"NC State's senior design project pushed me to think entrepreneurially, and that was the impetus for the Temperfect ," Maxwell says. "Without that push from NC State, and the support I got from my professors, I would have never started the project, never met Dean, and this never would have happened for me."

Explore further: Off-world manufacturing is a go with space printer

Related Stories

Scientists Make Temperature-Regulating Coffee Mug

Aug 25, 2009

(PhysOrg.com) -- A well-insulated mug may keep your coffee somewhat warm, but now scientists have designed a high-tech mug that can keep drinks hot or cold at the perfect temperature for up to half an hour. ...

You can look -- but don't touch

Jan 07, 2009

Consumers are often told that if they break an item, they buy it. But a new study suggests that if they just touch an item for more than a few seconds, they may also end up buying it.

Study explains Pacific equatorial cold water region

Jul 25, 2013

A new study published this week in the journal Nature reveals for the first time how the mixing of cold, deep waters from below can change sea surface temperatures on seasonal and longer timescales.

Recommended for you

Off-world manufacturing is a go with space printer

8 hours ago

On Friday, the BBC reported on a NASA email exchange with a space station which involved astronauts on the International Space Station using their 3-D printer to make a wrench from instructions sent up in ...

First drone in Nevada test program crashes in demo

Dec 19, 2014

A drone testing program in Nevada is off to a bumpy start after the first unmanned aircraft authorized to fly without Federal Aviation Administration supervision crashed during a ceremony in Boulder City.

Fully automated: Thousands of blood samples every hour

Dec 19, 2014

Siemens is supplying automation technology for the longest and one of the most cutting-edge sample processing lines in any clinical laboratory. The line, or automation track, 200 meters long, in Marlborough, ...

Explainer: What is 4-D printing?

Dec 19, 2014

Additive manufacturing – or 3D printing – is 30 years old this year. Today, it's found not just in industry but in households, as the price of 3D printers has fallen below US$1,000. Knowing you can p ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.