Better batteries possible with new spectroscopic technique

Dec 05, 2013
This schematic depicts a new spectroscopy technique that offers a never-before-seen look at how electrodes function. Windows etched into a foil covering allow soft X-rays to measure charge dynamics in an operating electrode.

(Phys.org) —A new technique developed at Berkeley Lab's Advanced Light Source could help scientists better understand and improve the materials required for high-performance lithium-ion batteries that power EVs and other applications.

The technique, which uses soft X-ray spectroscopy, measures something never seen before: the migration of ions and electrons in an integrated, operating battery electrode.

Over the past several years, scientists have developed several ways to study the changes in a working electrode. These include techniques based on hard X-rays, electron microscopy, neutron scattering, and nuclear magnetic resonance imaging.

But most of these methods track structural changes. They don't track electron and ion dynamics directly, which is very important in the push to understand and optimize battery performance.

"In order to improve battery materials, we need to study charge dynamics in a complete electrode while it's operating – and our approach does that," says Wanli Yang, a scientist at Berkeley Lab's Advanced Light Source who developed the technique with Gao Liu of Berkeley Lab's Environmental Energy Technologies Division.

Their technique can also analyze charge dynamics in an integrated lithium-ion electrode, not just an electrode's individual components. This is important because an electrode is a complex system consisting of active materials, electrolyte, binder and additives, which are attached to a metallic current collector.

Yang calls this image a “beautiful butterfly.” That’s partly because it looks like one. But it’s also because the image, obtained via soft x-ray spectroscopy at the Advanced Light Source, vividly reveals the chemical and physical changes of the electrode material during battery operation. The sensitive probe could clarify the charge and discharge mechanism of battery electrodes, and fingerprint the migration of the electrons and ions.

As reported in a recent issue of the journal Nature Communications, their approach is already yielding insights into how lithium-ion battery electrodes charge. For example, Yang and Liu used it to study a lithium-ion cathode made of nickel, manganese, and cobalt. They found that its "electrochemical state of charge" is uniformly distributed across the electrodes as it charges.

They also studied a different lithium-ion cathode made of iron and phosphate—and found some surprises. The phase transformation starts near the current collectors, and then it takes hours of relaxation time before the electrodes' "electrochemical state of charge" is uniformly distributed.

This counters conventional wisdom about the charging process of lithium-ion battery electrodes, which indicates that theoretical simulations and further experiments are needed to shed light on the phenomenon, the scientists say.

Adds Liu, "This comparative study reveals the power of in situ soft X-ray spectroscopy to reveal the charge dynamics in battery electrodes. Ultimately, studying the microscopic mechanisms of charge dynamics will help researchers design better battery materials."

The new technique relies on the Advanced Light Source, a Department of Energy national user facility located at Berkeley Lab that generates intense light for scientific research. The facility emits soft X-rays, which are very good at interacting with electrons. Because of this, soft X-ray spectroscopy is an ideal probe for studying battery characteristics such as electron and ion diffusion.

There was one big obstacle, however. Soft X-rays are so-named because they don't penetrate very far, only about 100 nanometers, which isn't far enough to study an electrode covered by a metal foil.

To overcome this, the spectroscopists at the Advanced Light Source worked with battery experts in the Environmental Energy Technologies Division. The team employed a laser system to etch a special detection window on the top foil layer. This allows soft X-rays to penetrate into an electrode and measure what the electrons and ions are up to.

"The shallow probe depth of soft X-rays becomes an advantage in this case because it provides the chance to obtain position-sensitive information on the electron and ion migration," says Yang.

This research was performed at beamline 8.0.1 at the Advanced Light Source, with cells assembled at the Environmental Energy Technologies Division. It was funded in part by the Energy Department's Office of Energy Efficiency and Renewable Energy and Berkeley Lab's Laboratory Directed Research and Development Program.

Explore further: Composite battery boost

More information: "Distinct charge dynamics in battery electrodes revealed by in situ and operando soft X-ray spectroscopy." Xiaosong Liu, Dongdong Wang, Gao Liu, Venkat Srinivasan, Zhi Liu, Zahid Hussain, Wanli Yang. Nature Communications 4, Article number: 2568. DOI: 10.1038/ncomms3568
Received 07 May 2013 Accepted 05 September 2013 Published 08 October 2013

Related Stories

Composite battery boost

Dec 04, 2013

(Phys.org) —New composite materials based on selenium (Se) sulfides that act as the positive electrode in a rechargeable lithium-ion (Li-ion) battery could boost the range of electric vehicles by up to ...

Inexpensive material boosts battery capacity

Oct 23, 2013

Battery-powered cars offer many environmental benefits, but a car with a full tank of gasoline can travel further. By improving the energy capacity of lithium-ion batteries, a new electrode made from iron ...

Scientists invent self-healing battery electrode

Nov 17, 2013

Researchers have made the first battery electrode that heals itself, opening a new and potentially commercially viable path for making the next generation of lithium ion batteries for electric cars, cell ...

Recommended for you

Device turns flat surface into spherical antenna

Apr 14, 2014

By depositing an array of tiny, metallic, U-shaped structures onto a dielectric material, a team of researchers in China has created a new artificial surface that can bend and focus electromagnetic waves ...

User comments : 0

More news stories

CERN: World-record current in a superconductor

In the framework of the High-Luminosity LHC project, experts from the CERN Superconductors team recently obtained a world-record current of 20 kA at 24 K in an electrical transmission line consisting of two ...

Glasses strong as steel: A fast way to find the best

Scientists at Yale University have devised a dramatically faster way of identifying and characterizing complex alloys known as bulk metallic glasses (BMGs), a versatile type of pliable glass that's stronger than steel.

Tech giants look to skies to spread Internet

The shortest path to the Internet for some remote corners of the world may be through the skies. That is the message from US tech giants seeking to spread the online gospel to hard-to-reach regions.

Patent talk: Google sharpens contact lens vision

(Phys.org) —A report from Patent Bolt brings us one step closer to what Google may have in mind in developing smart contact lenses. According to the discussion Google is interested in the concept of contact ...

Wireless industry makes anti-theft commitment

A trade group for wireless providers said Tuesday that the biggest mobile device manufacturers and carriers will soon put anti-theft tools on the gadgets to try to deter rampant smartphone theft.