Next-generation semiconductors synthesis

November 8, 2013

Although silicon semiconductors are nearly universal in modern electronics, devices made from silicon have limitations—including that they cease to function properly at very high temperatures. One promising alternative are semiconductors made from combinations of aluminum, gallium, and indium with nitrogen to form aluminum nitride (AlN), gallium nitride (GaN), and indium nitride (InN), which are stronger and more stable than their silicon counterparts, function at high temperatures, are piezoelectric (that is, generate voltage under mechanical force), and are transparent to, and can emit, visible light.

Conventional processes for producing AIN layers run at temperatures as high as 1150 degrees Celsius, and offer limited control over the thickness of the layers. Now a new technique, described in the AIP Publishing journal Applied Physics Letters, offers a way to produce high-quality AlN layers with atomic-scale thickness and at half the temperature of other methods.

Neeraj Nepal and colleagues of the United States Naval Research Laboratory in Washington, D.C. formed AIN layers using atomic layer epitaxy (ALE), in which materials are "grown," layer-by-layer, by sequentially employing two self-limiting chemical reactions onto a surface.

"For instance to grow aluminum nitride, you would inject a pulse of an aluminum precursor into the growth zone where it would coat all surfaces," explained Nepal. "After purging any excess aluminum precursor away, you would then 'build' the crystal by injecting a pulse of the nitrogen precursors into the growth zone, where it reacts with the aluminum precursor at the surface to form a layer of AlN. Then you'd purge any excess nitrogen and reaction products away and repeat the process."

With this process, the researchers produced a material with qualities similar to those synthesized at much higher temperatures, but under conditions that allow it to be integrated in new ways for the fabrication of devices for technologies such as transistors and switches.

The work, Nepal says, expands the potential for new advanced specialty materials that could be used, for example, in next-generation high-frequency radiofrequency electronics, such as those used for high-speed data transfer and cell phone services.

Explore further: Solar nanowire array may increase percentage of sun's frequencies available for energy conversion

More information: The article, "Epitaxial Growth of AlN Films via Plasma-assisted Atomic Layer Epitaxy" by N. Nepal, S. B. Qadri, J. K. Hite, N.A. Mahadik, M.A. Mastro, and C. R. Eddy, Jr. appears in the journal Applied Physics Letters:

Related Stories

Growing thin films of germanium

September 6, 2013

Researchers have developed a new technique to produce thin films of germanium crystals—key components for next-generation electronic devices such as advanced large-scale integrated circuits and flexible electronics, which ...

Growing gallium nitride crystals

November 7, 2013

Gallium nitride (GaN) is an important material for the semiconductor industry. It features a wide band gap and high thermal conductivity at room temperature, which make it a good material for optoelectronic devices and high-performance ...

Recommended for you

New surfaces delay ice formation

October 6, 2015

If you've ever waited on an airport runway for your plane to be de-iced, had to remove all your food so the freezer could defrost, or arrived late to work because you had to scrape the sheet of ice off your car windshield, ...


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.