A laboratory for all (cleaning) situations

Oct 21, 2013
From engine block to cloth wipe: "CleanLab 2020" comprises the entire bandwidth of industrial cleanliness technology in a single cleanroom concept. Credit: Fraunhofer IPA

Thanks to "CleanLab 2020," dirt particles on a scale ranging from the nano to the micro and found on and in components, surfaces and liquids in a wide variety of industries can be analyzed for the first time. At the same time a contiguous clean room provides a site where components can be cleaned and any impurities extracted and investigated.

When it comes to cleanliness, we tend to think of "dust bunnies" cheerfully frolicking through the home, or perhaps of a vacuum cleaner designed to put an end to their merriment. But cleanliness is a topic of concern for automobile technicians, dental technicians and aerospace engineers, too. Because brake lines, dental implants and samples from space only function as they should or submit to clear identification if they are clean.

The cleaning processes used are as varied as the industries themselves. In the semiconductor industry, even on the nanometer scale are unwelcome. In the medical field, the threshold is in the vicinity of 5 micrometers, while in automobile production the trouble starts at 200 micrometers. The techniques used to evaluate purity vary as well: optical procedures are well-suited for hunting down dirt on smooth surfaces such as silicon wafers. In the case of hollow components such as oil lines, brake lines or screw threads, the particles must first be rinsed out and filtered before they can be analyzed. Impurities can be the result of oils, metal abrasion in machinery and components, or even organic sources such as human beings.

At IPA, for more than 25 years researchers in the "Ultraclean Technology and Micromanufacturing" department have specialized in production in conditions. Markus Rochowicz describes two of their current challenges: "First, there are now some 1000 industrial laboratories that investigate components for impurities. Yet to my knowledge, there is still no cross-sectoral concept that can be applied within a contiguous cleanroom. And second, to accommodate their often very complex component geometries, the has devised methods that can benefit other industries as well. With the new laboratory, the IPA seeks to introduce this knowledge to other branches of industry that are sensitive to purity issues." So right in time for parts2clean, then, researchers have opened their "CleanLab 2020." An innovation designed to close these very gaps in the analysis of impurities: by creating a contiguous cleanroom for purification, extraction and analysis, the new laboratory provides an uninterrupted material flow. It offers the entire spectrum of current, conventional technologies for the analysis of impurities. In particular, rinsing concepts derived from the automobile industry can be used in other sectors as well.

The analytical laboratory is around 100 square meters in size and offers room for about four or five scientists. A system of airlocks provides a cleanroom link between the analytical laboratory and the cleanliness laboratories already in place at IPA. The researchers in Stuttgart have developed particularly extensive capacity in purification through carbon dioxide in recent years. IPA is also home to the world's cleanest cleanroom. "CleanLab 2020" is divided into two main laboratory areas: in the first, any impurities are extracted from components brought in, and in the second the impurities are filtered and analyzed. Rochowicz and his colleagues can remove the particles using different rinsing chambers, ultrasound baths, or closed ducting such as purging systems. There are six different optical and scanning electron microscope systems available to provide geometric measurements and complete analyses of . The scientists can use a micro-scale computer tomography to display and measure the particles in three dimensions. This gives them an insight into the interior of components. A directed flow of air ensures that the environment at all workstations is kept "ultraclean." "This way, we can analyze the cleanliness of nearly any object in search of particles in the sub-nano to upper micrometer range. Since the laboratory complex is now integrated in our training concept, industrial users can benefit from the new capabilities available," Rochowicz says, describing the laboratory's bandwidth.

Explore further: Keeping an eye on component cleanliness

add to favorites email to friend print save as pdf

Related Stories

Keeping an eye on component cleanliness

Oct 21, 2013

There are exceedingly strict cleanliness guidelines for components in sectors such as the automobile industry. And yet monitoring of the process for parts purification has been inadequate to date. Fraunhofer ...

Deep cleaning with carbon dioxide

Oct 09, 2012

One of the many interesting items on show is a tool that combines – in one step – cleaning with supercritical carbon dioxide and cleaning with CO2 snow.

Seal of quality for hygienic equipment

Sep 14, 2009

The processing and packaging of food is governed by very strict hygiene rules. Researchers are now testing production equipment for cleanroom suitability and are listing qualified products in an online database.

Hydrogen fuel put to the test

Sep 27, 2011

National Physical Laboratory has developed a suite of analytical methods to detect trace-level impurities in hydrogen fuel that can affect the performance of hydrogen fuel cells – a potentially carbon-free ...

Recommended for you

Sweeping air devices for greener planes

7 hours ago

The large amount of jet fuel required to fly an airplane from point A to point B can have negative impacts on the environment and—as higher fuel costs contribute to rising ticket prices—a traveler's wallet. ...

User comments : 0