Synthetic polymers enable cheap, efficient, durable alkaline fuel cells

Aug 07, 2013
This is an example membrane -- a cost-efficient and durable alternative for fuel cells consisting of two electrodes with a clear membrane sandwiched between them. Credit: Patrick Mansell

A new cost-effective polymer membrane can decrease the cost of alkaline batteries and fuel cells by allowing the replacement of expensive platinum catalysts without sacrificing important aspects of performance, according to Penn State researchers.

"We have tried to break this paradigm of tradeoffs in materials (by improving) both the stability and the conductivity of this membrane at the same time, and that is what we were able to do with this unique polymeric materials design," said Michael Hickner, associate professor of .

In solid-state alkaline fuel cells, anion exchange membranes conduct between the device's cathode and anode—the negative and positive connections of the cell—to create useable electric power. Most fuel cells currently use membranes that require platinum-based catalysts that are effective but expensive.

Hickner's new polymer is a unique anion exchange membrane—a new type of fuel cell and battery membrane—that allows the use of much more cost-efficient non-precious metal catalysts and does not compromise either durability or efficiency like previous anion exchange membranes.

"What we're really doing here is providing alternatives, possible choices, new technology so that people who want to commercialize fuel cells can now choose between the old paradigm and new possibilities with anion exchange membranes," Hickner said.

Creating this alternative took some intuition and . In work spearheaded by Nanwen Li, a in materials science and engineering, Hickner's team created several variations of the membrane, each with slightly different . They then ran each variation under simulated conditions to predict which would be optimal in an actual fuel cell. The researchers published their results in a recent issue of the Journal of the American Chemical Society.

A membrane electrode assembly is shown being inserted into a fuel cell testing stand. By creating several variations of membranes and studying them under similar conditions, the research team can predict the most optimal structure in an active and stable fuel cell. Credit: Patrick Mansell

Based on these initial tests, the group predicted that the membranes with long 16-carbon structures in their chemical makeup would provide the best efficiency and durability, as measured respectively by conductivity and long-term stability.

Chao-Yang Wang, William E. Diefenderfer Chair of Mechanical Engineering, and his team then tested each possibility in an operating fuel cell device. Yongjun Leng, a research associate in mechanical and nuclear engineering, measured the fuel cell's output and lifetime for each material variation.

Despite predictions, the membranes containing shorter 6-carbon structures proved to be much more durable and efficient after 60 hours of continuous operation.

"We were somewhat surprised…that what we thought was the best material in our lab testing wasn't necessarily the best material in the cell when it was evaluated over time," said Hickner, who added that researchers are still trying to understand why the 6-carbon variation has better long-term durability than the 16-carbon sample in the fuel cell by studying the operating conditions of the cell in detail.

Because the successful membrane was so much more effective than the initial lab studies predicted, researchers are now interested in accounting for the interactions that the membranes experienced while inside the cell.

"We have the fuel cell output—so we have the fuel cell efficiency, the fuel cell life time—but we don't have the molecular scale information in the fuel cell," Hickner said. "That's the next step, trying to figure out how these polymers are working in the on a detailed level."

Explore further: Team pioneers strategy for creating new materials

Related Stories

Charge your mobile phone with formic acid?

May 27, 2013

( —Surprisingly the answer is yes. With the technology of today it is possible to use environmental friendly formic acid in fuel cell powering your mobile phone or laptop. Physicist Florian Nitze, ...

As fuel cells evolve, a role emerges for palladium

Mar 18, 2013

( —Researchers at Yale University have taken another step toward the development of low-temperature, lower-cost alkaline fuel cells, which are battery-like devices that convert oxygen and hydrogen ...

Fuel cells show potential

Mar 20, 2012

National Physical Laboratory scientists have developed an innovative fuel cell reference electrode that has been used to map changes in electrode potential inside a working polymer electrolyte membrane (PEM) ...

Recommended for you

Team pioneers strategy for creating new materials

Aug 29, 2014

Making something new is never easy. Scientists constantly theorize about new materials, but when the material is manufactured it doesn't always work as expected. To create a new strategy for designing materials, ...

Plug n' Play protein crystals

Aug 29, 2014

Almost a hundred years ago in 1929 Linus Pauling presented the famous Pauling's Rules to describe the principles governing the structure of complex ionic crystals. These rules essentially describe how the ...

Breaking benzene

Aug 27, 2014

Aromatic compounds are found widely in natural resources such as petroleum and biomass, and breaking the carbon-carbon bonds in these compounds plays an important role in the production of fuels and valuable ...

User comments : 0