Bubbles are the new lenses for nanoscale light beams

Aug 09, 2013
These are laboratory images of a light beam without a bubble lens, followed by three examples of different bubble lenses altering the light. Credit: Tony Jun Huang, Penn State

Bending light beams to your whim sounds like a job for a wizard or an a complex array of bulky mirrors, lenses and prisms, but a few tiny liquid bubbles may be all that is necessary to open the doors for next-generation, high-speed circuits and displays, according to Penn State researchers.

To combine the speed of with the portability of , researchers use nanoplasmonics—devices that use short to modulate light on the , where conventional optics do not work. However, aiming and focusing this modulated at desired targets is difficult.

"There are different solid-state devices to control (light beams), to switch them or modulate them, but the tenability and reconfigurability are very limited," said Tony Jun Huang, associate professor of and mechanics. "Using a bubble has a lot of advantages."

The main advantage of a bubble lens is just how quickly and easily researchers can reconfigure the bubble's location, size, and shape—all of which affect the direction and focus of any light beam passing through it.

Huang's team created separate simulations of the light beams and bubble lens to predict their behaviors and optimize conditions before combining the two in the laboratory. They published their findings in Nature Communications.

To form the bubble lens, researchers used a low-intensity laser to heat water on a . The tiny bubble's optical behavior remains consistent as long as the laser's power and the environmental temperature stay constant.

A nanoscale light beam modulated by short electromagnetic waves, known as surface plasmon polaritons -- labelled as SPP beam -- enters the bubble lens, officially known as a reconfigurable plasmofluidic lens. The bubble controls the light waves, while the grating provides further focus. Credit: Tony Jun Huang, Penn State

Simply moving the laser or adjusting the laser's power can change how the bubble will deflect a light beam, either as a concentrated beam at a specific target or as a dispersed wave. Changing the liquid also affects how a light beam will refract.

The materials to form bubble lenses are inexpensive, and the bubbles themselves are easy to dissolve, replace and move.

"In addition to its unprecedented reconfigurability and tenability, our bubble lens has at least one more advantage over its solid-state counterparts: its natural smoothness," said Huang. "The smoother the lens is, the better quality of the light that pass through it."

Huang believes that the next step is to find out how the bubble's shape influences the direction of the light beam and the location of its focal point. Fine control over these light beams will enable improvements for on-chip biomedical devices and super resolution imaging.

"For all these applications, you really need to precisely control light in nanoscale, and that's where this work can be a very important component," said Huang.

Explore further: New absorber will lead to better biosensors

Related Stories

Novel beams made of twisted atoms

Aug 07, 2013

Physicists have, for the first time, now built a theoretical construct of beams made of twisted atoms. These findings by Armen Hayrapetyan and colleagues at Ruprecht-Karls-University Heidelberg in Germany ...

Physicists freeze motion of light for a minute

Aug 06, 2013

Physicists in Darmstadt have been able to stop something that has the greatest possible speed and that never really stops. We're talking about light. Already a decade ago, physicists stopped it very for a short moment. In ...

Taking the 'random' out of a random laser

Jul 15, 2013

(Phys.org) —Random Lasers are tiny structures emitting light irregularly into different directions. Scientists at the Vienna University of Technology have now shown that these exotic light sources can be ...

Liquid lens shrinks laser measuring device

May 10, 2013

Lasers are widely used in many areas of science, industry and medicine and the quality of the beams they produce needs to be measured to make sure they perform correctly. As electronic devices become smaller ...

Liquid lens creates tiny flexible laser on a chip

May 11, 2009

(PhysOrg.com) -- Like tiny Jedi knights, tunable fluidic micro lenses can focus and direct light at will to count cells, evaluate molecules or create on-chip optical tweezers, according to a team of Penn State engineers. ...

Hawaii lab turns laser-powered bubbles into microrobots

May 23, 2012

(Phys.org) -- A team of scientists from the University of Hawaii are working on microrobots created from bubbles of air in a saline solution. The bubbles take on their title of “robots” as a laser ...

Recommended for you

New absorber will lead to better biosensors

4 hours ago

Biological sensors, or biosensors, are like technological canaries in the coalmine. By converting a biological response into an optical or electrical signal, they can alert us to dangers in our external and internal environments. ...

Ultrafast remote switching of light emission

Sep 30, 2014

Researchers from Eindhoven University of Technology can now for the first time remotely control a miniature light source at timescales of 200 trillionth of a second. They published the results on Sept. 2014 ...

Nanotube cathode beats large, pricey laser

Sep 30, 2014

Scientists are a step closer to building an intense electron beam source without a laser. Using the High-Brightness Electron Source Lab at DOE's Fermi National Accelerator Laboratory, a team led by scientist ...

User comments : 0