Underwater propulsion from a 3D printer

Jul 22, 2013
Four elastomer balls pump water and provide the required propulsion. The propulsion system was produced with the fused deposition modeling (FDM) generative production process. Credit: Fraunhofer IPA

Octopods, which are also known as octopuses or squid, are considered to be the most intelligent invertebrates. In fact, they have been referred to as the "sages of the sea". They are capable of learning; they can open tin cans, and can even tell patterns apart. They are also clever when it comes to protecting themselves from their enemies.

While they generally move along the with their eight arms, they flee by swimming head-first, in line with the principles of propulsion. When the does this, water is taken into its mantle, which is then closed by contracting sphincter muscles. The water is then squirted back out at a high pressure through a funnel. The resulting propulsion pushes the octopus forward in the opposite direction. By changing the position of the funnel, the octopus can precisely steer its direction of travel. For researchers at the Fraunhofer Institute for Manufacturing Engineering and Automation IPA, this intelligent propulsion principle served as a role model for the development of an underwater propulsion system. "Squids use this type of movement mainly if they are trying to flee suddenly and quickly. The system is simple, but effective. When they use it, the can speed up considerably over short distances," says Andreas Fischer, an engineer at IPA in Stuttgart. "We have integrated this propulsion principle into our underwater actuators: four balls with mechanical inner workings create propulsion by pumping water."

Water is sucked into each actuator or elastomer ball through an opening ; a recirculation valve prevents reflux. A hydraulic piston contracts the integrated cable structure like a muscle. In this way, it pushes the water out of the 20 x 6 cm ball. In turn, a motor pump moves the hydraulic piston. "Our underwater actuator is well-suited for maneuvering small boats. It can also be used as a floating aid for water sport devices such as jet skis, surf boards, or scooters that pull divers into deep water. In contrast to ship propellers, it is quiet, and fish cannot get caught in it," the researcher says in explaining the benefits of the system, which has just successfully past initial laboratory tests.

Industrial robots shorten production processes

The best part: the experts can produce the system in a single step with a 3D printer. In order to produce its complex geometry amorphously with soft plastic, the researchers opted for the fused deposition modeling generative production process, or FDM for short. With this approach, the plastics to be processed are heated and liquefied in an extrusion head , and are transformed into a thin filament in the pressure nozzle. This filament is then applied in layers, from bottom to top, to produce a complex 3D component. Fischer and his team used thermoplastics such as polyurethane because of their flexibility. The final product of this process is an underwater that can stand extreme levels of pressure without breaking. Even in situations of very high stress, it always returns to its original shape.

Thanks to FDM, the researchers can also scale the actuators. In fact, components of up to two meters in size can be printed three-dimensionally. This can be done with the help of an industrial robot that has been equipped with three extrusion heads. "At the moment, the maximum construction volume of FDM facilities is 91.4 x 61 x 91.4 cm, whereby no more than ten different thermoplastics can be processed in layers. With robot-based FDM, much larger components can be produced, with different combinations of material. By integrating continuous filament into thermoplastics, for example, we can manufacture carbon fiber-reinforced components quickly and at a low cost," says the scientist in explaining the advantages of the melting process. Moreover, the production process can be made much shorter by using several robots that work on a single component simultaneously.

Explore further: Underwater propulsion from a 3-D printer

Related Stories

Underwater propulsion from a 3-D printer

Jul 01, 2013

Nature inspires creativity: in building a silent propulsion system for boats and water sport devices, researchers used the octopus as their role model. The system can be produced at a low cost and in a single ...

New underwater robot swims and senses like a fish

Jul 18, 2013

In recent years, robotic underwater vehicles have become more common in a variety of industrial and civil sectors. They are used extensively by the scientific community to study the ocean. For example, underwater ...

Composites for large-scale manufacturing

Dec 10, 2012

Continuous fiber-reinforced composites with thermoplastic matrix resins are very well suited for use in automotive manufacturing. However, to manufacture them is complicated. A new approach now makes it possible ...

Efficient lightweight motors for electric vehicles

Jul 22, 2013

Large-scale implementation of electric mobility requires low-cost and flexible production of efficient electric drives. New lightweight construction concepts may reduce vehicle weight and, hence, energy consumption during ...

Recommended for you

Large streams of data warn cars, banks and oil drillers

Apr 16, 2014

Better warning systems that alert motorists to a collision, make banks aware of the risk of losses on bad customers, and tell oil companies about potential problems with new drilling. This is the aim of AMIDST, the EU project ...

User comments : 1

Adjust slider to filter visible comments by rank

Display comments: newest first

antialias_physorg
not rated yet Jul 23, 2013
with a 3D printer.
...
In fact, components of up to two meters in size can be printed three-dimensionally. This can be done with the help of an industrial robot
...
by using several robots that work on a single component simultaneously.

Now THAT is a ballet I'd like to see a video of. Would also be a cool exercise in robotic motion planning and collision avoidance.
Seems like this will be the next big step in manufacturing of basically most everything.

More news stories

Tiny power plants hold promise for nuclear energy

Small underground nuclear power plants that could be cheaper to build than their behemoth counterparts may herald the future for an energy industry under intense scrutiny since the Fukushima disaster, the ...

Turning off depression in the brain

Scientists have traced vulnerability to depression-like behaviors in mice to out-of-balance electrical activity inside neurons of the brain's reward circuit and experimentally reversed it – but there's ...

Is Parkinson's an autoimmune disease?

The cause of neuronal death in Parkinson's disease is still unknown, but a new study proposes that neurons may be mistaken for foreign invaders and killed by the person's own immune system, similar to the ...