Cheap, color, holographic video: Better holographic video displays

June 19, 2013 by Larry Hardesty
A photograph of a holographic stereogram created using anisotropic leaky-mode modulators and a frequency division technique for color. Credit: Daniel Smalley

Today in the journal Nature, researchers at MIT's Media Lab report a new approach to generating holograms that could lead to color holographic-video displays that are much cheaper to manufacture than today's experimental, monochromatic displays. The same technique could also increase the resolution of conventional 2-D displays.

Using the new technique, Daniel Smalley, a graduate student in the Media Lab and first author on the new paper, is building a prototype color holographic-video display whose resolution is roughly that of a standard-definition TV and which can update 30 times a second, fast enough to produce the illusion of motion. The heart of the display is an optical chip, resembling a , that Smalley built, using only MIT facilities, for about $10.

"Everything else in there costs more than the chip," says Smalley's thesis advisor, Michael Bove, a principal research scientist at the Media Lab and head of its Object-Based Media Group. "The power supplies in there cost more than the chip. The plastic costs more than the chip."

Joining Bove and Smalley on the Nature paper are two other graduate students in Bove's group, James Barabas and Sundeep Jolly, and Quinn Smithwick, who was a postdoc at MIT at the time but is now a research scientist at Disney Research.

When strikes an object with an irregular surface, it bounces off at a huge variety of angles, so that different aspects of the object are disclosed when it's viewed from different perspectives. In a hologram, a beam of light passes through a so-called diffraction fringe, which bends the light so that it, too, emerges at a host of different angles.

One way to produce holographic video is to create diffraction fringes from patterns displayed on an otherwise transparent screen. The problem with that approach, Bove explains, is that the pixels of the have to be as small as the wavelength of the light they're bending, and "most display technologies don't happily shrink down that much."

Anisotropic leaky-mode modulator for creating holographic video images. The modulator is illuminated with red, green and blue laser light to create a full-color holograms using a novel frequency division technique. Credit: MIT

Sound footing

Stephen Benton, a Media Lab professor who died in 2003, created one of the first holographic- by adopting a different technique, called acousto-optic modulation, in which precisely engineered sound waves are sent through a piece of transparent material. "The waves basically squeeze and stretch the material, and they change its index of refraction," Bove says. "So if you shine a laser through it, [the waves] diffract it."

Benton's most sophisticated display—the Mark-II, which was built with the help of Bove's group—applied acousto-optic modulation to a crystal of an expensive material called tellurium dioxide. "That was the biggest piece of tellurium dioxide crystal that had ever been grown," Bove says. "And that wasn't TV resolution. So there was a definite scaling problem going on there."

Smalley instead uses a much smaller crystal of a material called lithium niobate. Just beneath the surface of the crystal he creates microscopic channels known as waveguides, which confine the light traveling through them. Onto each waveguide, he also deposits a metal electrode, which can produce an acoustic wave.

Each waveguide corresponds to one row of pixels in the final image. In the Mark-II, the tellurium dioxide crystal had to be big enough that the acoustic waves producing the separate lines of the hologram were insulated from each other. In Smalley's chip, on the other hand, the waveguides with their individual electrodes can be packed mere micrometers apart from each other.

Beams of red, green and blue light are sent down each waveguide, and the frequencies of the acoustic wave passing through the crystal determine which colors pass through and which are filtered out. Combining, say, red and blue to produce purple doesn't require a separate waveguide for each color; it just requires a different acoustic-wave pattern.

Selling points

Bove considers that the most exciting aspect of the new chip. "Until now, if you wanted to make a light modulator for a video projector, or an LCD panel for a TV, or something like that, you had to deal with the red light, the green light and the blue light separately," he says. "If you look closely at an LCD panel, each pixel actually has three little color filters in it. There's a red subpixel, a green subpixel and a blue subpixel."

"First of all," he continues, "that's inefficient, because the filters, even if they were perfect, would throw away two-thirds of the light. But second, it reduces either the resolution or the speed at which the modulator can operate."

According to Smalley, on the other hand, "What's most exciting about [the new chip] is that it's a waveguide-based platform, which is a major departure from every other type of spatial light modulator used for holographic video right now." Waveguides are already a common feature in commercial optoelectronics, Smalley explains, and techniques for manufacturing them are well established. "One of the big advantages here is that you get to use all the tools and techniques of integrated optics," he says. "Any problem we're going to meet now in holographic video displays, we can feel confidence that there's a suite of tools to attack it, relatively simply."

Explore further: Using Xbox Kinect, standard graphics chips, researchers achieve highest frame rate yet for streaming holographic video

More information:

Related Stories

Researchers discover way to create true-color 3-D holograms

April 8, 2011

( -- Satoshi Kawata, Miyu Ozaki and their team of photonics physicists at Osaka University in Japan, have figured out a way to capture the original colors of an object in a still 3-D hologram by using plasmons ...

Multiview 3-D photography made simple

June 19, 2013

Computational photography is the use of clever light-gathering tricks and sophisticated algorithms to extract more information from the visual environment than traditional cameras can.

Recommended for you

Test racetrack dipole magnet produces record 16 tesla field

November 30, 2015

A new world record has been broken by the CERN magnet group when their racetrack test magnet produced a 16.2 tesla (16.2T) peak field – nearly twice that produced by the current LHC dipoles and the highest ever for a dipole ...

Turbulence in bacterial cultures

November 30, 2015

Turbulent flows surround us, from complex cloud formations to rapidly flowing rivers. Populations of motile bacteria in liquid media can also exhibit patterns of collective motion that resemble turbulent flows, provided the ...

'Material universe' yields surprising new particle

November 25, 2015

An international team of researchers has predicted the existence of a new type of particle called the type-II Weyl fermion in metallic materials. When subjected to a magnetic field, the materials containing the particle act ...

CERN collides heavy nuclei at new record high energy

November 25, 2015

The world's most powerful accelerator, the 27 km long Large Hadron Collider (LHC) operating at CERN in Geneva established collisions between lead nuclei, this morning, at the highest energies ever. The LHC has been colliding ...


Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Jun 20, 2013
Measure the resolution in what? Voxels? For this device, how many?
1 / 5 (1) Jun 20, 2013
Faster, please. I want my holodeck.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.