Terracotta and cement roofs vulnerable in wildfires, study finds

May 15, 2013

(Phys.org) —Although made of fire-resistant materials, terracotta and cement roof tiles are vulnerable to penetration by windblown embers generated in wildfires, according to new research findings from the National Institute of Standards and Technology (NIST).

In scoping experiments conducted in the Fire Research Wind Tunnel Facility at Japan's Building Research Institute, NIST fire scientist Samuel Manzello found that the embers—or firebrands—infiltrated gaps between certain types of roofing tiles and, once trapped, proceeded to melt the underlayment below.

Of the four roof styles studied, the flat tile terracotta roofing assembly performed best probably due to its interlocking design. For these tiles, the firebrands were observed to become trapped within the interlocking sections of the tiles and, as a result, the firebrands did not penetrate past the tiles towards the underlayment.

Manzello cautions, however, against a false sense of security with this type of roofing assembly.

"Over time, gaps can develop in roofing assemblies due to settling of the structure, aging of the materials, earthquakes or other causes," he says. In an earlier study,** Manzello and colleagues simulated this effect and observed greatly reduced performance of ceramic roofing assemblies as compared to well-aligned Spanish tile assemblies.

This video is not supported by your browser at this time.
The NIST Dragon firebrand generator in action. Credit: NIST. Opening dragon graphic ©DVARG/Shutterstock

This infiltration of embers through gaps, he explains, ultimately could lead to ignition of materials in an attic space immediately below.

The research findings suggest that one potential approach to reducing wildfire risks would be to install continuous, fire-resistant underlayments. This hypothesis, Manzello says, requires further investigation.

In the new research, Manzello studied roof assemblies made of flat and profiled (wave-like) cement and terracotta tiles. The assemblies were exposed to firebrand showers generated by the NIST-developed firebrand generator. Devised by Manzello, the generator, or NIST Dragon, is a two-meter tall, goose-neck-shaped apparatus that breathes in wood chips and exhales firebrands at a controlled rate.*** The novel device supports NIST's program to improve the fire-resistance or hardening of structures in the wildland-urban interface (WUI), with the ultimate aim of reducing property damage and the threat to life safety associated with WUI fires.

Explore further: Off-world manufacturing is a go with space printer

More information: Manzello, S. The Performance of Concrete Tile and Terracotta Tile Roofing Assemblies Exposed to Wind-Driven Firebrand Showers, (NIST Technical Note 1794) March 2013. Available at: dx.doi.org/10.6028/NIST.TN.1794.

Manzello, S. et al. Quantifying the vulnerabilities of ceramic tile roofing assemblies to ignition during a firebrand attack. Fire Safety Journal 45 (2010), pp. 35-43.

add to favorites email to friend print save as pdf

Related Stories

Spreading like wildfire? Maybe not always

Oct 12, 2011

One of America's most costly natural disasters are wildland fires, and wildland-urban interface (WUI) fires rank among the worst of these. WUI is the threshold where wildfires consume not only the landscape, ...

Recommended for you

Off-world manufacturing is a go with space printer

Dec 20, 2014

On Friday, the BBC reported on a NASA email exchange with a space station which involved astronauts on the International Space Station using their 3-D printer to make a wrench from instructions sent up in ...

First drone in Nevada test program crashes in demo

Dec 19, 2014

A drone testing program in Nevada is off to a bumpy start after the first unmanned aircraft authorized to fly without Federal Aviation Administration supervision crashed during a ceremony in Boulder City.

Fully automated: Thousands of blood samples every hour

Dec 19, 2014

Siemens is supplying automation technology for the longest and one of the most cutting-edge sample processing lines in any clinical laboratory. The line, or automation track, 200 meters long, in Marlborough, ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.