Measurement technique offers a way of improving optical lens making (w/ video)

Apr 24, 2013

( —Researchers at the University of Rochester have applied a sophisticated imaging technique to obtain the first 3D, high-resolution pictures of a recently developed type of optical lenses. They say that using Optical Coherence Tomography (OCT) during the manufacturing process allows them to significantly improve the quality of these new and promising lenses.

The results are published this week in Scientific Reports, a journal.

This type of lens, Spherical Gradient in (S-GRIN), represented a recent breakthrough in lens manufacturing and has many potential applications, including for lightweight single-lens cameras, night-vision goggles and ball lenses for . Many animals have eyes that are effectively S-GRINs, which gives them more focusing power, sharper images and a lower number of components.

This video is not supported by your browser at this time.
The University of Rochester team scanned a Gradient in Refractive Index (GRIN) sheet using Optical Coherence Tomography in order to show the structure of layers that make up the material. The technique allows the internal structure of the optical material to be understood without disturbing the material. Credit: Scientific Reports, Jannick Rolland.

When light passed through a lens, the amount it is bent – or focused – is determined by the lens' shape, and the of the lens material. S-GRINs work by having a varying or gradient refractive index. This is known as refractive index gradient. In human eyes this gradient is 0.03. These new lenses have a gradient of over 0.08, which is unusually high, and can help with , which is when different colors of light focus at different points, leading to a poorly focused image.

S-GRINs consist of thousands of layers of compressed plastic bent into a lens-type shape. By using OCT, Jannick Rolland, Brian J. Thompson Professor of Optical Engineering at Rochester's Institute of Optics, and her team were able to look at each of these layers individually. They could see all the features of the material down to about one fiftieth of the width of a human hair, obtaining high-resolution 3D images, giving a more precise characterization of how the lens is bending the light.

OCT is a powerful imaging tool with multiple applications in the biomedical sciences. But until now, people had struggled to apply it to . Rolland was confident that her team could tweak the technique to make it possible to visualize the complete structure of these lenses. "I had done the calculation and thought we could do it," she said. "And sure enough, after several months of work we had 3D movies of the whole structure of the lenses and also clear pictures of each of the layers – it was amazing."

Rolland and her team are collaborating with Michael Ponting from PolymerPlus, who is developing the manufacturing process for this cutting-edge technology lens, which was invented by Professor Eric Baer at Case Western University. By being able to show the whole lens structure, Rolland and her team were able to pinpoint some areas of the manufacturing process that could be improved. For example, they saw that some of the layers were thicker than the company had hoped for. The feedback that OCT offered allowed S-GRINs to be improved significantly.

S-GRINs are made from plastic, which offers many advantages to glass for lenses: it is lighter and more easily deformed into different shapes. Plastic optics have their own challenges however, consistency and high-quality among them. Rolland believes that embedding OCT in the can begin to address these challenges.

OCT works by shining light, in this case infrared light (infrared is what humans perceive as heat), onto the that is going to be studied. It uses a technique that is similar to ultrasound machines, like the ones used to image the womb during pregnancy. "In the same way that in ultrasound we measure the time of flight to the tissue and back to localize the presence of a structure, we can do this with light that has a much smaller wavelength, which means a much higher resolution," said Rolland. Light is scattered by the different layers of the material so by counting how much time the light takes to come back, it is possible to know how deep into the material it scattered from, and then a picture of the structure can be built.

Explore further: Black phosphorus is new 'wonder material' for improving optical communication

More information:… /full/srep01709.html

Related Stories

Engineers give industry a moth's eye view

Nov 26, 2007

When moths fly at night, their eyes need to capture all the light available. To do this, certain species have evolved nanoscopic structures on the surface of their eyes which allow almost no light to reflect off the surface ...

Recommended for you

Unified theory for skyrmion-materials

7 hours ago

Magnetic vortex structures, so-called skyrmions, could in future store and process information very efficiently. They could also be the basis for high-frequency components. For the first time, a team of physicists ...

Scientists provide new data on the nature of dark matter

8 hours ago

Recent research conducted by scientists from the University of Granada sheds light on the nature of dark matter, one of the most important mysteries in physics. As indirect evidence provided by its gravitational ...

Why seashells' mineral forms differently in seawater

11 hours ago

For almost a century, scientists have been puzzled by a process that is crucial to much of the life in Earth's oceans: Why does calcium carbonate, the tough material of seashells and corals, sometimes take ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.