Silicone liquid crystal stiffens with repeated compression

Apr 29, 2013
A liquid crystal sample like this one, seen under a microscope, gets tougher when repeatedly compressed, according to research at Rice University. Credit: Verduzco Laboratory/Rice University

(Phys.org) —Squeeze a piece of silicone and it quickly returns to its original shape, as squishy as ever. But scientists at Rice University have discovered that the liquid crystal phase of silicone becomes 90 percent stiffer when silicone is gently and repeatedly compressed. Their research could lead to new strategies for self-healing materials or biocompatible materials that mimic human tissues.

A paper on the research appeared this month in Nature's online journal Nature Communications.

in its liquid crystal phase is somewhere between a solid and , which makes it very handy for many things. So Rice polymer scientist Rafael Verduzco was intrigued to see a material he thought he knew well perform in a way he didn't expect. "I was really surprised to find out, when my student did these measurements, that it became stiffer," he said. "In fact, I didn't believe him at first."

The researchers had intended to quantify results seen a few years ago by former Rice graduate student Brent Carey, who subjected a nanotube-infused polymer to a process called repetitive . An astounding 3.5 million compressions (five per second) over a week toughened the material, just like muscles after a workout, by 12 percent. What Verduzco and lead author/Rice graduate student Aditya Agrawal came across was a material that shows an even stronger effect. They had originally planned to study liquid crystal silicone/nanotube composites similar to what Carey tested, but decided to look at liquid crystal silicones without the first. "It's always better to start simple," Verduzco said.

Rice University researchers show a small sample of liquid crystal silicone that has been drastically toughened through repeated compression. From left: Walter Chapman, Aditya Agrawal, Pulickel Ajayan and Rafael Verduzco. Credit: Jeff Fitlow/Rice University

Silicones are made of long, flexible chains that are entangled and knotted together like a bowl of spaghetti. In conventional silicones the chains are randomly oriented, but the group studied a special type of silicone known as a liquid crystal . In these materials, the chains organize themselves into rod-shaped . When the material was compressed statically, like squeezing a piece of Jell-O or stretching a rubber band, it snapped right back into its original shape. The entanglements and knots between chains prevent it from changing shape. But when dynamically compressed for 16 hours, the silicone held its new shape for weeks and, surprisingly, was much stiffer than the original material.

"The molecules in a liquid crystal elastomer are like rods that want to point in a particular direction," Verduzco said. "In the starting sample, the rods are randomly oriented, but when the material is deformed, they rotate and eventually end up pointing in the same direction. This is what gives rise to the stiffening. It's surprising that by a relatively gentle but repetitive compression, you can work out all the entanglements and knots to end up with a sample where all the polymer rods are aligned."

Before testing, the researchers chemically attached liquid crystal molecules – similar to those used in LCD displays—to the silicones. While they couldn't see the rods, X-ray diffraction images showed that the side groups – and thus the rods – had aligned under compression. "They're always coupled. If the side group orients in one direction, the polymer chain wants to follow it. Or vice versa," Verduzco said.

The X-rays also showed that samples heated to 70 degrees Celsius slipped out of the liquid crystal phase and did not stiffen, Verduzco said. The stiffening effect is reversible, he said, as heating and cooling a stiffened sample will allow it to relax back into its original state within hours.

Verduzco plans to compress silicones in another phase, called smectic, in which the polymer rods align in layers. "People have been wanting to use these in displays, but they're very hard to align. A repetitive compression may be a simple way to get around this challenge," he said.

Since silicones are biocompatible, they can also be used for tissue engineering. Soft tissues in the body like cartilage need to maintain strength under repeated compression and deformation, and elastomers exhibit similar durability, he said.

Explore further: Can perovskites and silicon team up to boost industrial solar cell efficiencies?

More information: www.nature.com/ncomms/journal/… full/ncomms2772.html

add to favorites email to friend print save as pdf

Related Stories

Reserchers find new method for manipulating liquid crystals

Feb 11, 2010

(PhysOrg.com) -- A new method for manipulating the molecules of liquid crystals in ways previously unachieved could result in more effective industrial sealants, improved food packaging and even enhanced electronic displays, ...

Recommended for you

New insights found in black hole collisions

Mar 27, 2015

New research provides revelations about the most energetic event in the universe—the merging of two spinning, orbiting black holes into a much larger black hole.

X-rays probe LHC for cause of short circuit

Mar 27, 2015

The LHC has now transitioned from powering tests to the machine checkout phase. This phase involves the full-scale tests of all systems in preparation for beam. Early last Saturday morning, during the ramp-down, ...

Swimming algae offer insights into living fluid dynamics

Mar 27, 2015

None of us would be alive if sperm cells didn't know how to swim, or if the cilia in our lungs couldn't prevent fluid buildup. But we know very little about the dynamics of so-called "living fluids," those ...

First glimpse inside a macroscopic quantum state

Mar 27, 2015

In a recent study published in Physical Review Letters, the research group led by ICREA Prof at ICFO Morgan Mitchell has detected, for the first time, entanglement among individual photon pairs in a beam ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.