Color printing at highest resolution possible enabled by use of arrays of metal-coated nanostructures

Apr 11, 2013
Color printing at highest resolution possible enabled by use of arrays of metal-coated nanostructures
Variation in post size and spacing in the metal array alters which incoming wavelength of light (red, green or blue) is reflected back. Reproduced from Ref. 1 © 2012 K. Kumar et al.

Commercial laser printers typically produce pin-sharp images with spots of ink about 20 micrometers apart, resulting in a resolution of 1,200 dots per inch (dpi). By shrinking the separation to just 250 nanometers—roughly 100 times smaller—a research team at A*STAR can now print images at an incredible 100,000 dpi, the highest possible resolution for a color image. These images could be used as minuscule anti-counterfeit tags or to encode high-density data.

To print the image, the team coated a silicon wafer with insulating hydrogen silsesquioxane and then removed part of that layer to leave behind a series of upright posts of about 95 high. They capped these nanoposts with layers of chromium, silver and gold (1, 15 and 5 nanometers thick, respectively), and also coated the wafer with metal to act as a backreflector.

Each color pixel in the image contained four posts at most, arranged in a square. The researchers were able to produce a rainbow of colors simply by varying the spacing and diameter of the posts to between 50 nanometers and 140 nanometers.

When light hits the thin metal layer that caps the posts, it sends ripples—known as plasmons—running through the electrons in the metal. The size of the post determines which are absorbed, and which are reflected (see image).

The plasmons in the metal caps also cause electrons in the backreflector to oscillate. "This coupling channels energy from the disks into the backreflector plane, thus creating strong absorption that results in certain colors being subtracted from the ," says Joel Yang, who led the team of researchers at the A*STAR Institute of Materials Research and Engineering and the A*STAR Institute of High Performance Computing.

Printing images in this way makes them potentially more durable than those created with conventional dyes. In addition, color images cannot be any more detailed: two adjacent dots blur into one if they are closer than half the wavelength of the light reflecting from them. Since the wavelength of visible light ranges about 380–780 nanometers, the nanoposts are as close as is physically possible to produce a reasonable range of colors.

Although the process takes several hours, Yang suggests that a template for the nanoposts could rapidly stamp many copies of the image. "We are also exploring novel methods to control the polarization of light with these nanostructures and approaches to improve the color purity of the pixels," he adds.

Explore further: A promising light source for optoelectronic chips can be tuned to different frequencies

More information: Kumar, K. et al. Printing colour at the optical diffraction limit. Nature Nanotechnology 7, 557–561 (2012). www.nature.com/nnano/journal/v… /nnano.2012.128.html

Related Stories

Image: Saturn's Northern storm

Nov 21, 2011

(PhysOrg.com) -- This false-color mosaic from NASA's Cassini spacecraft shows the tail of Saturn's huge northern storm. In mid-September 2004, the Cassini spacecraft chronicled a similar, but smaller, storm ...

Making efficient color filter for display applications

Aug 29, 2012

Flat panel displays, mobile phones and many digital devices require thin, efficient and low-cost light-emitters for applications. The pixels that make up the different colors on the display are typically ...

Recommended for you

For electronics beyond silicon, a new contender emerges

Sep 16, 2014

Silicon has few serious competitors as the material of choice in the electronics industry. Yet transistors, the switchable valves that control the flow of electrons in a circuit, cannot simply keep shrinking ...

Making quantum dots glow brighter

Sep 16, 2014

Researchers from the University of Alabama in Huntsville and the University of Oklahoma have found a new way to control the properties of quantum dots, those tiny chunks of semiconductor material that glow ...

The future face of molecular electronics

Sep 16, 2014

The emerging field of molecular electronics could take our definition of portable to the next level, enabling the construction of tiny circuits from molecular components. In these highly efficient devices, ...

Study sheds new light on why batteries go bad

Sep 14, 2014

A comprehensive look at how tiny particles in a lithium ion battery electrode behave shows that rapid-charging the battery and using it to do high-power, rapidly draining work may not be as damaging as researchers ...

User comments : 0