Self-assembling silica microwires may herald new generation of integrated optical devices

Jan 23, 2013
This image shows self-assembled silica wires illuminated by HeNe (helium-neon) laser light from one end. Credit: John Canning.

(Phys.org)—Silica microwires are the tiny and as-yet underutilized cousins of optical fibers. If precisely manufactured, however, these hair-like slivers of silica could enable applications and technology not currently possible with comparatively bulky optical fiber. By carefully controlling the shape of water droplets with an ultraviolet laser, a team of researchers from Australia and France has found a way to coax silica nanoparticles to self-assemble into much more highly uniform silica wires.

The international team describes their novel manufacturing technique and its potential applications in a paper published today in the Optical Society's (OSA) open-access journal Optics Materials Express. This technique is particularly significant, according to the researchers, because it could, for the first time, enable silica to be combined with any material through a process of microwire self-assembly.

"We're currently living in the 'Glass Age,' based upon silica, which enables the Internet," says John Canning, team member and a professor in the school of chemistry at The University of Sydney in Australia. "Silica's high thermal processing, ruggedness, and unbeatable over equate to unprecedented capacity to transmit data and information all over the world."

These scanning electron microscope images reveal how UV laser light changes the surface texture and wettability of glass. Figures (a) and (b) reveal subtle texturing after lower-energy exposure to laser light. These textures made the surfaces more hydrophilic in (a) and more hydrophobic (water repellent) in (b). Higher energies produced a rougher and even more hydrophilic (wettable) (c) and (d) close-up of (c), surface. Credit:Optical Materials Express

Silica, however, is normally incompatible with most other materials so functionalizing silica (giving it the capability) to do more than just carry light has been a challenge. Further, bridging the gap between the light-speed transmission of data through silica and electronic and photonic components – such as optical switches, , photon sources, and even sensors – requires some form of interconnect. But this transition is highly inefficient using optical fibers and interconnection losses remain one of the largest unresolved issues in .

Silica microwires, if they could be manufactured or self-assembled in place, have the potential to operate as optical interconnects. They also could achieve new functionality by adding different chemicals that can only be introduced by self-assembly.

Silica wires, unlike optical fiber, have no cladding, which means greater confinement of light in a smaller structure better suited for interconnection, further minimizing losses and physical space. "So we were motivated to solve the great silica incompatibility problem," explains Canning.

To this end, the researchers came up with the idea of using evaporative self-assembly of silica nanoparticles at room temperature. They recently reported this breakthrough in the journal Nature Communications, demonstrating single-photon-emitting nanodiamonds embedded in silica, which is a first step toward a practical photon source for future quantum computing.

The key to carrying this innovation further, as described in their new research published today in Optical Materials Express, is perfecting the manufacturing process so highly uniform wires self-assemble from nanoparticles suspended in a solution. The challenge has been that as naturally forming round droplets evaporate, they produce very uneven silica microwires. This is due to the microfluidic currents inside the droplet, which corral the nanoparticles into specific patterns aided and held together by intermolecular attractive forces. The nanoparticles then crystalize when the solvent (water) evaporates.

Figure (a) shows a roughly circular water droplet containing silica nanoparticles resting on an untreated glass surface. Figure (c) demonstrates how a UV laser can alter the surface texture, allowing the droplet to preferentially flow over the more wettable section, changing the shape of the droplet. Credit: Optical Materials Express

Canning and his team realized that by changing the shape of the droplet and elongating it ever so slightly, they could concurrently change the flow patterns inside the drop, controlling how the assemble.

The researchers did this by changing the "wettability" properties of the glass the drops were resting upon. The team used an to alter and pattern a glass made of the mineral borosilicate. This patterning made the surface more wettable in a very controlled way, allowing the droplet to assume a slightly more oblong shape. This subtle shape change was enough to alter the microscopic flows and eddies so as the water evaporated, the silica formed straighter, more uniform microwires.

The researchers anticipate that their processing technology will allow complete control of nanoparticle for various technologies, including microwire devices and sensors, , and possibly -based integrated circuits.

It also will enable the production of selective devices such as chemical and biological sensors, photovoltaic structures, and novel switches in both form and on waveguides – all of which could lead to technologies that seamlessly integrate microfluidic, electronic, quantum, and photonic functionality.

Explore further: Flatland, we hardly knew ye: Unique 1-D metasurface acts as polarized beam splitter, allows novel form of holography

More information: Paper: "Laser tailoring surface interactions, contact angles, drop topologies, and the self-assembly of optical microwires," J. Canning et al., Optical Materials Express, Vol. 3, Issue 2, pp. 284-294 (2013). www.opticsinfobase.org/ome/abs… .cfm?URI=ome-3-2-284

Related Stories

Researchers make optical fibers from common materials

Aug 13, 2012

Clemson researchers are taking common materials to uncommon places by transforming easily obtainable and affordable materials into fiber. Their findings are published in Nature Photonics, the world's top jo ...

New kind of optical fiber developed

Feb 25, 2011

(PhysOrg.com) -- A team of scientists led by John Badding, a professor of chemistry at Penn State University, has developed the very first optical fiber made with a core of zinc selenide -- a light-yellow ...

Synthetic cells used to bioengineer new forms of silica

Jun 08, 2012

(Phys.org) -- Scientists do not fully understand how nature uses proteins to develop new materials and minerals, but learning more about the natural processes could lead to bioengineering methods such as the ...

How to count nanoparticles

Oct 11, 2011

Nanoparticles of a substance can be counted and the size distribution can be determined by dispersing the nanoparticles into a gas. But some nanoparticles tend to aggregate when the surrounding conditions change. Scientists ...

Recommended for you

Scientists develop compact medical imaging device

Oct 23, 2014

Scientists at the MIRA research institute, in collaboration with various companies, have developed a prototype of a handy device that combines echoscopy (ultrasound) with photoacoustics. Combining these two ...

A 'Star Wars' laser bullet

Oct 22, 2014

Action-packed science-fiction movies often feature colourful laser bolts. But what would a real laser missile look like during flight, if we could only make it out? How would it illuminate its surroundings? ...

User comments : 2

Adjust slider to filter visible comments by rank

Display comments: newest first

Telekinetic
1 / 5 (1) Jan 23, 2013
Here's a case where industry mimics the way nerve endings or tiny capillaries form. This technique marks the beginning of incubating cyborgs in a bottle.
CapitalismPrevails
1 / 5 (1) Jan 23, 2013
Will this improve the efficiency for solar panels made from silicon nanowires?