Ames Laboratory improving process to recycle rare-earth materials

October 24, 2012
Rare-earth magnet scraps are melted in a furnace with magnesium. Scientists at the US Department of Energy's Ames Laboratory are improving the process to reclaim rare-earth materials. Credit: Ames Laboratory -- USDOE

Recycling keeps paper, plastics, and even jeans out of landfills. Could recycling rare-earth magnets do the same? Perhaps, if the recycling process can be improved.

Scientists at the U.S. Department of Energy's (DOE) Ames Laboratory are working to more effectively remove the neodymium, a rare earth element, from the mix of other materials in a magnet. Initial results show maintain the properties that make rare-earth magnets useful.

The current rare earth recycling research builds on Ames Laboratory's decades of rare-earth processing experience. In the 1990s, Ames Lab scientists developed a process that uses molten magnesium to remove from neodymium-iron-boron magnet scrap. Back then, the goal was to produce a mixture of magnesium and neodymium because the neodymium added important strength to the alloy, rather than separate out high-purity rare earths because, at the time, rare earth prices were low.

But rare earth prices increased ten-fold between 2009 and 2011 and supplies are in question. Therefore, the goal of today's rare-earth recycling research takes the process one step farther.

"Now the goal is to make new magnet alloys from recycled rare earths. And we want those new alloys to be similar to alloys made from unprocessed rare-earth materials," said Ryan Ott, the Ames Laboratory scientist leading the research. "It appears that the processing technique works well. It effectively removes rare earths from commercial magnets."

Ott's research team also includes Ames Laboratory scientist Larry Jones and is funded through a work for others agreement with the Korea Institute of . The research group is developing and testing the technique in Ames Lab's Materials Preparation Center, with a suite of materials science tools supported by the DOE Office of Science.

"We start with sintered, uncoated magnets that contain three rare earths: neodymium, and dysprosium," said Ott. "Then we break up the magnets in an automated mortar and pestle until the pieces are 2-4 millimeters long.

Next, the tiny magnet pieces go into a mesh screen box, which is placed in a stainless-steel crucible. Technicians then add chunks of solid magnesium.

A radio frequency furnace heats the material. The magnesium begins to melt, while the magnet chunks remain solid.

"What happens then is that all three rare earths leave the magnetic material by diffusion and enter the molten magnesium," said Ott. "The iron and boron that made up the original magnet are left behind."

The molten magnesium and rare-earth mixture is cast into an ingot and cooled. Then they boil off the magnesium, leaving just the rare behind.

"We've found that the properties of the recycled rare earths compare very favorably to ones from unprocessed materials," said Ott. "We're continuing to identify the ideal processing conditions."

The next step is optimizing the extraction process. Then the team plans to demonstrate it on a larger scale.

"We want to help bridge the gap between the fundamental science and using this science in manufacturing," said Ott. "And can process big enough amounts of material to show that our rare-earth works on a large scale."

The Ames Laboratory is a U.S. Department of Energy Office of Science national laboratory operated by Iowa State University. The Ames Laboratory creates innovative materials, technologies and energy solutions. We use our expertise, unique capabilities and interdisciplinary collaborations to solve global problems.

Explore further: Mastery of rare-earth elements vital to America's security

Related Stories

Mastery of rare-earth elements vital to America's security

March 16, 2010

Karl A. Gschneidner Jr., a senior metallurgist at the U.S. Department of Energy's Ames Laboratory, today cautioned members of a Congressional panel that "rare-earth research in the USA on mineral extraction, rare-earth separation, ...

Hitachi develops recycling technologies for rare earth metals

December 16, 2010

Hitachi today announced that it has developed technologies for recycling rare earth magnets from hard disk drive (HDD) motors and air conditioners and other compressors. Specifically, developed machinery to separate and collect ...

China rare earths supplier suspends production

October 20, 2011

(AP) -- China's biggest producer of rare earths is suspending production for one month in hopes of boosting slumping prices of the exotic minerals used in mobile phones and other high-tech products.

Hitachi unveils motor without 'rare earths'

April 11, 2012

Japanese high-tech firm Hitachi Wednesday unveiled an electric motor that does not use "rare earths", aiming to cut costs and reduce dependence on imports of the scarce minerals from China.

Recommended for you

Sydney makes its mark with electronic paper traffic signs

July 28, 2015

Visionect, which is in the business of helping companies build electronic paper display products, announced that Sydney has launched e-paper traffic signs. The traffic signage integrates displays from US manufacturer E Ink ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.