Small X-band photoinjector packs powerful punch

Sep 25, 2012 by Lori Ann White
SLAC accelerator physicist Cecile Limborg stand next to her current project, a compact photoinjector using advanced X-band microwave technology, in the Next Linear Collider Test. Credit: Matt Beardsley

(—Accelerator physicists at SLAC have started commissioning the world's most compact photoinjector – a device that spits out electrons when hit by light. Photoinjectors are used to generate electrons for free-electron lasers (FELs) like the Linac Coherent Light Source, among other things, and this development could enable much more compact FELs, as well as other types of accelerator-based facilities.

The device is just one facet of X-band research at SLAC, which aims to find ways to accelerate with "X-band" microwaves rather than the S-band waves that currently boost electrons in the linear accelerator to . X-band microwaves are four times shorter than S-band waves, and can accelerate electrons to higher energy more quickly.

They have been under investigation for more than two decades at SLAC as part of research for a next-generation linear collider.

"SLAC has unique worldwide expertise in X-band technology," said accelerator physicist Cecile Limborg of the X-Band Test Area (XTA). SLAC is also working on transferring more SLAC X-band technology to industry. Limborg said the technology is in high demand in FEL facilities such as the Swiss Light Source and FERMI@Elletra, as well as at the Compact Linear Collider project at , where the technology was adopted in 2007 for the main positron and electron linacs.

SLAC's expertise proved invaluable in the design of the little photoinjector. At about two inches wide and four inches long, it's one-quarter the width of the device that provides electrons for the LCLS.

Despite the fact that it had to be built to more exacting requirements than for S-band technology – including tighter machine tolerances, more precision required to align parts and more robust inner surfaces that won't break down under the more intense X-band fields – the device appears to work as expected.

Small X-band photoinjector packs powerful punch
The world’s most compact photoinjector. Credit: Matt Beardsley

"There was a very fast turn-on for this experiment – less than 18 months," Limborg said. Limborg credits the support she received from several groups, including the Test Facilities team at the Next Linear Collider Test Assembly in End Station B, where the entire X-band assembly, including an X-band klystron and X-band accelerator, is located for testing.

"The laser group, the alignment group, the LCLS control systems group," all contributed as well, she said. Limborg herself is a veteran of the team that built the S-band-driven LCLS photoinjector, and she drew on experience gained lab-wide during the LCLS project as well.

The photoinjector is a modified version of one developed 10 years ago here at SLAC. During the recent tests, said Limborg, electrons from the photoinjector needed only a single klystron to accelerate them to an energy of 50 MeV by the time they'd traveled 1.8 meters, "and this was after only a few days of commissioning," she added.

In comparison, the electron bunches in the LCLS injector need two klystrons to power them up to 50 MeV in five meters. Limborg said she's confident that the next round of tests will see the electrons reach 100 MeV in the same 1.8-meter distance. Those tests will probably be conducted using an improved version of the photoinjector already waiting in the wings.

Current X-band technology research has expanded beyond components for a future linear collider. Some of the photoinjector work, funded by SLAC's High-Energy Physics General Accelerator Development program, is being done in collaboration with Lawrence Livermore National Laboratory. It's aimed at developing  an inverse Compton scattering-based gamma ray source, which would use the electron beam to boost photons to gamma-ray energies.

If funded, SLAC will provide the compact photoinjector and accelerator to generate and accelerate the electrons, and LLNL will provide a laser to boost light to gamma-ray energies.

But the research has other uses as well. "There's a great potential for this X-band injector to be used as a driver for an X-ray like LCLS – in fact, a 180-meter-long design is workable according to calculations," Limborg said. "That's very nice."

Limborg says she's excited by the opportunity to work on X-band gun technology. "One good thing about our facility is that we're a test facility," she said. "I can try things."

Explore further: New insights found in black hole collisions

add to favorites email to friend print save as pdf

Related Stories

Have Gun, Will Travel (at Light Speed)

Jan 25, 2007

The front third of the linac is undergoing an extreme makeover, metamorphosing into a first-of-its-kind hard x-ray free-electron laser, the Linac Coherent Light Source (LCLS). But even with the engineering ...

Ground Breaking New Science at SLAC

Oct 23, 2006

The Department of Energy's Stanford Linear Accelerator Center officially broke ground today for the Linac Coherent Light Source (LCLS), the world's first X-ray free-electron laser. Scheduled for completion ...

New Life for Linac

Nov 26, 2007

After years of planning and hard work involving teams from every corner of the lab, SLAC's venerable linac has undergone the most radical set of alterations in its 40+ year career. Although a handful of minor ...

World's First Hard X-ray Laser Achieves 'First Light'

Apr 21, 2009

( -- The world's brightest X-ray source sprang to life last week at the U.S. Department of Energy's SLAC National Accelerator Laboratory. The Linac Coherent Light Source (LCLS) offers researchers ...

Recommended for you

New insights found in black hole collisions

Mar 27, 2015

New research provides revelations about the most energetic event in the universe—the merging of two spinning, orbiting black holes into a much larger black hole.

X-rays probe LHC for cause of short circuit

Mar 27, 2015

The LHC has now transitioned from powering tests to the machine checkout phase. This phase involves the full-scale tests of all systems in preparation for beam. Early last Saturday morning, during the ramp-down, ...

Swimming algae offer insights into living fluid dynamics

Mar 27, 2015

None of us would be alive if sperm cells didn't know how to swim, or if the cilia in our lungs couldn't prevent fluid buildup. But we know very little about the dynamics of so-called "living fluids," those ...

Fluctuation X-ray scattering

Mar 26, 2015

In biology, materials science and the energy sciences, structural information provides important insights into the understanding of matter. The link between a structure and its properties can suggest new ...

Hydrodynamics approaches to granular matter

Mar 26, 2015

Sand, rocks, grains, salt or sugar are what physicists call granular media. A better understanding of granular media is important - particularly when mixed with water and air, as it forms the foundations of houses and off-shore ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.