Soaking up the Sun: partnership to make more efficient dye-sensitized solar panels

Aug 29, 2012

Solar panels, like those commonly perched atop house roofs or in sun-drenched fields, quietly harvesting the sun's radiant energy, are one of the standard-bearers of the green energy movement. But could they be better – more efficient, durable and affordable? That's what engineers from Drexel University and The University of Pennsylvania are trying to find out, with the aid of a little nanotechnology and a lot of mathematical modeling.

A three-year grant from the National Science Foundation has set the team on a track to explore ways to make new photoelectric cells more efficient, durable and affordable. The group is examining "dye-sensitized" , which capture radiation via photosensitive dye and convert it into electricity. Their goal: streamline the process inside the solar panels to make them more efficient at converting the radiation into electricity.

Dye-sensitized solar panels currently convert about 11 to 12 percent of the sunlight that hits them into electricity. The researchers are pushing to make these panels at least as efficient as their silicon counterparts, which currently convert about twice as much radiation as the dye-sensitized panels.

Despite this relative inefficiency, dye-sensitized panels have many advantages over . Among the advantages of are low cost, ease of manufacturing and construction from stable and abundant resource materials. Also, the durability of the dye-sensitized panels, combined with their ability to absorb more sunlight per surface area than standard silicon-based solar panels, make them attractive for mainstream use. There is also the potential to make dye-sensitized cells flexible, which would open them to a variety of new applications that are not options for the more rigid silicon panels. Due to the lagging rate of dye-sensitized cells, however, they are not as widely used as silicon panels. But with help from the group's research, this obstacle could soon be surmounted.

"Our ultimate goal is to design and test a highly efficient dye-sensitized solar cell array through computational optimal design, synthesis and integration," said Dr. Masoud Soroush, the project's lead principal investigator from Drexel.

The primary strategies put forth by the group involve organizing the erratic movement of radiation-excited, or "photogenerated," electrons into a more orderly flow and maintaining that flow through the interior of solar cell by refining the material in its electrolyte substrate.

"We are seeking the combination of electrolyte and electrode materials and cell design that provide the highest power conversion efficiency," Soroush said. "The final design should have minimum losses in electrical conduction within the photoanode and electrolyte of the cell."

Making a Path

At present, the process of energy collection and disbursal in a solar cell functions something like a frenetic fire drill. Solar radiation hits the photosensitive dye, which excites the electrons and sends them in an electrically charged frenzy through the field of nanoparticles comprising the electrode and finally out into the rest of the circuit.

The engineers are attempting to direct this rapid exodus of photogenerated electrons by inserting carbon nanotubes, tiny cylindrical graphite-carbon tubes that measure less than 10 nanometers in diameter, to act as corrals for their escape.

"In order for a solar cell to generate an electric current, the photogenerated electrons in the photoanode have to travel through the network of titanium dioxide nanoparticles and they encounter many boundaries between nanoparticles during the transport," said Dr. Daeyeon Lee, the project's principal investigator from the University of Pennsylvania. "Due to this random transit path for the electrons, a large fraction of them are lost in the nanoparticle network before they reach the indium tin oxide glass, thus failing to generate electric power."

According to Lee, carbon nanotubes provide uninterrupted pathways for electrons, while also preventing the loss of photogenerated electrons in transit from the solar cell into the exterior circuit. With the addition of the nanotubes, the overall charge collection efficiency of the solar cell is expected to increase.

Completing the Loop

The second part of the research aims to replace the electrolyte solution that separates the electrodes inside the solar cell with a more effective polymer substance. The electrolyte serves as an internal pathway for negatively charged ions to carry electrons from the cathode (negative electrode) to the anode (positive electrode), thus completing the electrical circuit. Currently, dye-sensitized solar cells use a liquid electrolyte because it is easier for the sponge-like, porous electrode to soak up the liquid for maximum contact. It is difficult, however, to seal in the liquid, leading to leakage problems. In addition, the transit of the negatively charged species through a liquid is much less efficient than through a polymer, according to the group.

"Replacing the liquid electrolyte with a polymer will help us make a more efficient solar cell. Unlike the liquid, the polymer will not leak out of the cell and opens the door for making a flexible solar cell," said Dr. Kenneth Lau, the project's co-principal investigator from Drexel. "The solid polymer is also going to reduce some of the major conversion losses in the cell by closing doors that lead to electron loss that takes place with using a runny liquid."

Lau's group has also devised a method to get the polymer into the sponge-like electrode –a challenge which is one of the main reasons for the use of a liquid electrolyte substrate in current solar cells. "Simply put, we have invented a method for directly making the polymer inside the sponge-like electrode, rather than figuring a way to squeeze an already-made solid polymer into the electrode," Lau said.

Modeling the Cell

The variables in the research, including nanotube placement and polymer composition, could make prototype manufacturing and testing a pricey and time-consuming endeavor. But with the help of a computational material design program, developed by Soroush, the team will avail itself of rapid mathematical modeling to determine the most effective combination of materials and layout. Soroush's program is unique to Drexel's research in dye-sensitized and gives the team a distinct advantage in reaching its goal.

"Our predictive solid-state dye-sensitized solar cell model will allow us to establish important relations between cell performance and cell design and its material parameters," Soroush said. "We will then use the predictive model to evaluate the cell performance over the entire cell design parameter space. By doing this we will be able to systematically search for and arrive at the design specifications that will optimize the cell's operation."

Explore further: Going nuts? Turkey looks to pistachios to heat new eco-city

add to favorites email to friend print save as pdf

Related Stories

Dye-sensitized solar cells break a new record

Nov 14, 2011

( -- Dye-sensitized Grätzel solar cells have just set a new efficiency benchmark. By changing the composition and color of the cells, an EPFL team has increased their efficiency to more than ...

Solar cells go thin and flimsy

Sep 04, 2006

The next generation of solar cells made out of plastics and microscopic crystals instead of silicon are taking shape at UQ (University of Queensland). UQ Master of Physics student Michael Deceglie is working ...

Affordable solar technology

Jan 06, 2011

An innovative Oxford company has developed new solar cell technology that is manufactured from cheap, abundant, non-toxic and non-corrosive materials and can be scaled to any volume.

Graphene boosts efficiency of next-gen solar cells

Apr 24, 2012

( -- The coolest new nanomaterial of the 21st century could boost the efficiency of the next generation of solar panels, a team of Michigan Technological University materials scientists has discovered.

Recommended for you

Obama launches measures to support solar energy in US

Apr 17, 2014

The White House Thursday announced a series of measures aimed at increasing solar energy production in the United States, particularly by encouraging the installation of solar panels in public spaces.

Tailored approach key to cookstove uptake

Apr 17, 2014

Worldwide, programs aiming to give safe, efficient cooking stoves to people in developing countries haven't had complete success—and local research has looked into why.

User comments : 0

More news stories

Ex-Apple chief plans mobile phone for India

Former Apple chief executive John Sculley, whose marketing skills helped bring the personal computer to desktops worldwide, says he plans to launch a mobile phone in India to exploit its still largely untapped ...

A homemade solar lamp for developing countries

( —The solar lamp developed by the start-up LEDsafari is a more effective, safer, and less expensive form of illumination than the traditional oil lamp currently used by more than one billion people ...

UAE reports 12 new cases of MERS

Health authorities in the United Arab Emirates have announced 12 new cases of infection by the MERS coronavirus, but insisted the patients would be cured within two weeks.

NASA's space station Robonaut finally getting legs

Robonaut, the first out-of-this-world humanoid, is finally getting its space legs. For three years, Robonaut has had to manage from the waist up. This new pair of legs means the experimental robot—now stuck ...