Cheaper, cleaner catalyst for burning methane created

Aug 09, 2012

As the world's accessible oil reserves dwindle, natural gas has become an increasing important energy source. The primary component of natural gas is methane, which has the advantage of releasing less carbon dioxide when it's burned than do many other hydrocarbon fuels. But because of the very stable structure of the methane molecule, it can be difficult to access the energy stored within. When unburned methane escapes into the atmosphere, it's a greenhouse gas 20 times more powerful than carbon dioxide.

Now, researchers from the University of Pennsylvania, along with collaborators from Italy and Spain, have created a material that catalyzes the burning of 30 times better than do currently available catalysts.

The discovery offers a way to more completely exploit energy from methane, potentially reducing emissions of this powerful from vehicles that run on natural gas. The may also offer a cleaner and cheaper way of generating energy from catalytic combustion in gas turbines.

"It's hard to come up with materials that are active enough and stable enough to withstand the of methane combustion," said Raymond J. Gorte, the Russell Pearce and Elizabeth Crimian Heuer Professor in Penn's Department of Chemical and Biomolecular Engineering. "Our materials look promising for some important applications."

Matteo Cargnello, now a in Penn's Department of Chemistry, joined Gorte and Kevin Bakhmutsky, a former Ph.D. student in Gorte's lab, in the study. Their collaborators included Paolo Fornasiero and Tiziano Montini of Italy's University of Trieste and National Research Council and José J. Calvino, Juan José Delgado and Juan Carlos Hernández Garrido of the Universidad de Cádiz in Spain. The study is published in the journal Science.

Cargnello began work on this project while still an undergraduate at the University of Trieste, during a visit to Gorte's laboratory, and continued the collaboration as he pursued his doctoral degree at the Graduate School of Nanotechnology at the University of Trieste.

Catalysts are materials that make a chemical transformation quicker, easier, more energy-efficient and often safer. A car's catalytic converter, for example, transforms exhaust gases into innocuous products.

Catalysts that are currently available to burn methane, however, do not do so completely, leaving unburned methane to escape into the atmosphere and contribute to climate change.

"Particularly if you have a natural-gas engine, methane is going to be a major part of that tailpipe exhaust," Gorte said.

In addition, these conventional catalysts can require high temperatures of 600-700 degrees Celsius to encourage reactions to move along. Yet the catalysts themselves often lose their efficiency or deactivate when exposed to the high temperatures generated by methane combustion.

Additional environmental harm can result when methane is used to produce energy in a gas turbine. In this process, methane is typically burned at very high temperatures, in excess of 800 degrees C. When those temperatures rise to around 1,300 degrees C or higher, the reaction can produce harmful byproducts, including nitrogen oxides, sulfur oxides and carbon monoxide.

Conventional catalysts for methane combustion are composed of metal nanoparticles, and in particular palladium (Pd), deposited on oxides such as cerium oxide (CeO2). Tweaking that approach, the researchers instead used a method that relies on self-assembly of nanoparticles. They first built the palladium particles — just 1.8 nanometers in diameter — and then surrounded them with a protective porous shell made of cerium oxide, creating a collection of spherical structures with metallic cores.

Because small particles such as these tend to clump together when heated and because these clumps can reduce a catalyst's activity, the team deposited them on a hydrophobic surface composed of aluminum oxide to ensure they were evenly distributed.

"These techniques are common in the nanotechnology community, but I think it's a novel approach in making catalyst materials," Gorte said.

Testing the material's activity, the researchers found that their core-shell nanostructure performed 30 times better than the best methane combustion catalysts currently available, using the same amount of metal. It completely burned methane at 400 degrees C.

"It's possible to envision this catalyst contributing to pollution control from automotive exhaust and maybe even improving the efficiency of gas turbines," Cargnello said.

The researchers plan to further study the structure of the new catalyst to better understand why it works so well. And they will use similar methods to create new materials to test.

"We can use this assembly method to test different types of metals and oxides," Cargnello said. "That will allow us to prepare a whole library of materials, some of which might be very good at catalyzing reactions besides methane combustion."

Explore further: Chemists tackle battery overcharge problem

More information: "Exceptional Activity for Methane Combustion over Modular Pd@CeO2 Subunits on Functionalized Al2O3," by M. Cargnello et al., Science, 2012.

Related Stories

Toward tapping the potential of 'stranded' natural gas

Feb 28, 2007

Newly discovered chemical catalysts may be an answer to the century-long search for economical ways of using natural gas now burned or "flared" as waste in huge quantities, scientists in the United States and Germany report. ...

Purdue finding could help develop clean energy technology

Mar 16, 2005

Chemical engineers at Purdue University have made a discovery that may help to improve a promising low-polluting energy technology that combusts natural gas more cleanly than conventional methods. The finding revolves aro ...

Sunlight turns carbon dioxide to methane

Mar 05, 2009

Dual catalysts may be the key to efficiently turning carbon dioxide and water vapor into methane and other hydrocarbons using titania nanotubes and solar power, according to Penn State researchers.

Recommended for you

Towards controlled dislocations

15 hours ago

Crystallographic defects or irregularities (known as dislocations) are often found within crystalline materials. Two main types of dislocation exist: edge and screw type. However, dislocations found in real ...

Chemists tackle battery overcharge problem

Oct 17, 2014

Research from the University of Kentucky Department of Chemistry will help batteries resist overcharging, improving the safety of electronics from cell phones to airplanes.

Surface properties command attention

Oct 17, 2014

Whether working on preventing corrosion for undersea oil fields and nuclear power plants, or for producing electricity from fuel cells or oxygen from electrolyzers for travel to Mars, associate professor ...

User comments : 2

Adjust slider to filter visible comments by rank

Display comments: newest first

Birger
not rated yet Aug 10, 2012
An even better use of methane would be to hurry up research about fuel cells that can convert methane energy *directly to electricity* (a non-trivial engineering challenge).
wwqq
not rated yet Aug 12, 2012
Our current strategy of extracting it as quickly as possible and burning it is idiotic; it's a very valuable chemical feedstock.

CCGTs are more efficient than any known fuel cell or fuel cell waste heat recovery and that's likely the way it will stay.