UA engineer launches robotic planetary Lake Lander

March 19, 2012 By Pete Brown
The lake lander TEX II is the latest component of Wolfgang Fink's autonomous planetary exploration fleet.

( -- Wolfgang Fink of the University of Arizona department of electrical and computer engineering has developed an autonomous robotic lake lander that could be used to explore this planet and others.

Fink unveiled the lake lander, named Tucson Explorer II, or TEX II, in a paper titled "Robotic Lake Lander Test Bed for Autonomous Surface and Subsurface Exploration of Titan Lakes," which he presented March 8 at an aerospace conference organized by the Institute of Electrical and Electronics Engineers in Big Sky, Mont.

Fink presented TEX II as an autonomous exploration vehicle that potentially could be used to explore the lakes of liquid hydrocarbon known to exist on Saturn's largest moon, Titan.

TEX II is the second vehicle designed by Fink as part of his NASA-award-winning concept of future , which he calls "tier-scalable reconnaissance." The first vehicle was a land-based planetary rover.

Fink envisions future planetary research being conducted by a hierarchy of intelligent, autonomous robots that could include satellites, airships or blimps, and a fleet of rovers and lake landers.

His humans-excluded vision is that an orbiting satellite would direct atmospheric blimps to scan potentially interesting areas of a . The blimps would then order surface-based rovers and lake landers to investigate in detail and collect samples in situ.

Fink's aim is to endow robots with curiosity. He wants them to want to investigate certain situations and environments, and then learn from those investigations so they can make increasingly smarter choices about where to go and what to investigate next.

A mission to Titan is many years away, but Fink made it clear that TEX II is close to being ready for more earthly duties. Like his planetary rovers, in its current configuration TEX II can be controlled from anywhere in the world via an Internet connection, and will soon be fully autonomous.

UA engineer launches robotic planetary Lake Lander
Wolfgang Fink, right, and his ECE grad student Alex Jacobs, prepare to launch TEX II for a series of tests on a lake near Tucson, Ariz.

"TEX II is ready to deploy on missions related to defense and security, such as harbor surveillance and cleanup operations of littoral munitions dumps and mines," Fink said. It is also ideal for search and rescue operations in oceans, lakes, and hazardous environments, as well as for environmental research projects, he added.

For example, Tokyo Electric Power acknowledges that cleanup at the Fukushima Daiichi nuclear plant could take 40 years. The sea around the plant is known to contain radioactive elements, and the necessary extensive sampling and monitoring could be achieved more safely and thoroughly with a fleet of autonomous vehicles such as TEX II.

"Another potential application of this lander is oceanographic research into currents and marine pollution," Fink said.

Millions of tons of plastic and other debris are dumped into our oceans every year, and rotating ocean currents known as gyres accumulate this refuse at their center. Dumped plastics can act as a chemical sponge by absorbing and concentrating pollutants, which are ingested by animals and birds and introduced into the food chain.

These accumulations of debris are often referred to as "garbage patches," and a huge amount of oceanographic research remains to determine their size and toxicity, and how big an environmental, indeed existential, threat they pose.

"TEX II is currently fitted with onboard cameras and sonar that can penetrate up to 100 meters," Fink said. Other sensors could be added, he said, to detect pathogens, toxins, explosives, radiation, and so on.

TEX II is highly modular and portable and was designed as a catamaran for enhanced stability and to allow the various onboard sensors easy access to the surface and subsurface of the water, or other liquid, upon which it is deployed. It weighs about 100 pounds and its central raised deck can carry a 150-pound payload of computers, batteries and sensors. The twin hulls are each 6 feet long and set about 5 feet apart.

Air-propellers mounted at the back of each hull are powered by electric motors that can switch rotational direction to drive TEX II backward or forward, which makes the craft highly agile and maneuverable: For example, TEX II can pivot in position, which no single-engine water craft can do.

The propellers are set as far apart as possible so they deliver maximum torque to the chassis during turning. "Top speed depends on the size of the motors attached," Fink said. "But the important point is that sonar works best at speeds up to 5 knots."

The shallow draft of the fortified Styrofoam hulls decreases perturbation in the water around TEX II, which minimizes interference with subsurface telemetry from the onboard sensors. The entire chassis and sensor deck can be decoupled from the catamaran hulls and attached to an alternative propulsion system.

The Styrofoam hulls of TEX II have a significant advantage over other hull types – inflatable hulls, for example – in that they can sustain hull damage without jeopardizing buoyancy.

Fink is an associate professor in the UA department of electrical and computer engineering and the department of biomedical engineering. He holds the Edward and Maria Keonjian Endowed Chair in the UA College of Engineering, and directs the Visual and Autonomous Exploration Systems Research Laboratory.

Fink is a fellow of the American Institute for Medical and Biological Engineering, and holds joint appointments in the UA departments of systems and industrial engineering, and ophthalmology and vision science.

Explore further: Professor's research helps restore sight to the blind

Related Stories

Robot Armada Might Scale New Worlds

October 28, 2009

( -- An armada of robots may one day fly above the mountain tops of Saturn's moon Titan, cross its vast dunes and sail in its liquid lakes.

Recommended for you

Samsung to disable Note 7 phones in recall effort

December 9, 2016

Samsung announced Friday it would disable its Galaxy Note 7 smartphones in the US market to force remaining owners to stop using the devices, which were recalled for safety reasons.

Swiss unveil stratospheric solar plane

December 7, 2016

Just months after two Swiss pilots completed a historic round-the-world trip in a Sun-powered plane, another Swiss adventurer on Wednesday unveiled a solar plane aimed at reaching the stratosphere.

Solar panels repay their energy 'debt': study

December 6, 2016

The climate-friendly electricity generated by solar panels in the past 40 years has all but cancelled out the polluting energy used to produce them, a study said Tuesday.


Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Mar 19, 2012
Simple design. However, Titan has 9 times less gravity than Earth. I would imagine an enclosed design along with a bulky rtg would be needed aboard craft before materials would freeze before any meaningful research could be done.
not rated yet Mar 19, 2012
I'd rather see it if this design could be flipped over and still work (i.e. a semi-submerged design).
I'm not sure about the weather/wave conditions on Titan, but I rather suspect that the occasional wave and or wind event is possible?

Best would be a globular enclosed design with a gimbal inside to keep the measuring apparatus upright. (Well, almost enclosed...gotta have the ability to poke stuff with sensors)

The Styrofoam hulls of TEX II have a significant advantage over other hull types

Titan's atmosphere contains hydrogen cyanide (which is acidic). I'm not sure styrofoam likes acids (I'm actually pretty sure it doesn't).
not rated yet Mar 19, 2012
That could be a problem, as at least one chemical industry site says styrene reacts quite readily with HCN. Whether it would do so at the temperatures found on Titan was mentioned, but it wouldn't be surprising.

not rated yet Mar 19, 2012
Whether it would do so at the temperatures found on Titan was mentioned

Hadn't though of that but that might be another point worth looking into: Does styrofoam become brittle at the temperatures prevalent on Titan (around 100 degrees Kelvin)?
not rated yet Mar 19, 2012
Probably. Most substances common on Earth seem to. Styrofoam seems to get brittle sitting a household freezer for an extended period. Then, one also has to consider the effect of vacuum exposure. In the months or years needed to get to Titan, the gas in the styrofoam would escape. On landing, the outside pressure would tend to crush the pores before the internal pressure could equalize. So, it would likely be a crushed, brittle chunk of styrene that's dissolving in the hydrocarbon seas of Titan...

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.