Tongue drive system goes inside the mouth to improve performance and user comfort

Feb 20, 2012
The circuitry for the new intraoral Tongue Drive System developed at Georgia Tech is embedded in this dental retainer worn in the mouth (right). The system interprets commands from seven different tongue movements to operate a computer (left) or maneuver an electrically powered wheelchair. Credit: Georgia Tech/Maysam Ghovanloo

The Tongue Drive System is getting less conspicuous and more capable. Tongue Drive is a wireless device that enables people with high-level spinal cord injuries to operate a computer and maneuver an electrically powered wheelchair simply by moving their tongues.

The newest prototype of the system allows users to wear an inconspicuous dental retainer embedded with sensors to control the system. The sensors track the location of a tiny magnet attached to the tongues of users. In earlier versions of the Tongue Drive System, the sensors that track the movement of the magnet on the tongue were mounted on a headset worn by the user.

"By moving the sensors inside the mouth, we have created a Tongue Drive System with increased and comfort that is nearly unnoticeable," said Maysam Ghovanloo, an associate professor in the School of Electrical and Computer Engineering at the Georgia Institute of Technology.

The new intraoral Tongue Drive System was presented and demonstrated on Feb. 20, 2012 at the IEEE International Solid-State Circuits Conference in San Francisco. Development of the system is supported by the National Institutes of Health, National Science Foundation, and Christopher and Dana Reeve Foundation.

The dental appliance for the new intraoral Tongue Drive System contains magnetic field sensors mounted on its four corners that detect movement of a tiny magnet attached to the tongue. It also includes a rechargeable lithium-ion battery and an induction coil to charge the battery. The circuitry fits in the space available on the retainer, which sits against the roof of the mouth and is covered with an insulating, water-resistant material and vacuum-molded inside standard dental acrylic. Credit: Georgia Tech/Maysam Ghovanloo

The new dental appliance contains magnetic field sensors mounted on its four corners that detect movement of a tiny magnet attached to the tongue. It also includes a rechargeable and an induction coil to charge the battery. The circuitry fits in the space available on the retainer, which sits against the roof of the mouth and is covered with an insulating, water-resistant material and vacuum-molded inside standard dental acrylic.

"One of the problems we encountered with the earlier headset was that it could shift on a user's head and the system would need to be recalibrated," explained Ghovanloo. "Because the dental appliance is worn inside the mouth and molded from dental impressions to fit tightly around an individual's teeth with clasps, it is protected from these types of disturbances."

When in use, the output signals from the sensors are wirelessly transmitted to an iPod or iPhone. Software installed on the iPod interprets the user's tongue commands by determining the relative position of the magnet with respect to the array of sensors in real-time. This information is used to control the movements of a cursor on the computer screen or to substitute for the joystick function in a powered wheelchair.

Georgia Tech researchers designed this universal interface for the intraoral Tongue Drive System that attaches directly to a standard electric wheelchair. The interface boasts multiple functions: It not only holds the iPod, but also wirelessly receives the sensor data and delivers it to the iPod, connects the iPod to the wheelchair, charges the iPod, and includes a container where the dental retainer can be placed at night for charging. Credit: Georgia Tech/Maysam Ghovanloo

Ghovanloo and his team have also created a universal interface for the intraoral Tongue Drive System that attaches directly to a standard electric wheelchair. The interface boasts multiple functions: it not only holds the iPod, but also wirelessly receives the sensor data and delivers it to the iPod, connects the iPod to the wheelchair, charges the iPod, and includes a container where the dental retainer can be placed at night for charging.

In preliminary tests, the intraoral device exhibited an increased signal-to-noise ratio, even when a smaller magnet was placed on the tongue. That improved sensitivity could allow additional commands to be programmed into the system. The existing Tongue Drive System that uses a headset interprets commands from seven different tongue movements.

The ability to train the system with additional commands – as many commands as an individual can comfortably remember – and having all of the commands available to the user at the same time are significant advantages over the common sip-n-puff device that acts as a simple switch controlled by sucking or blowing through a straw.

The researchers plan to begin testing the usability of the intraoral Tongue Drive System by able-bodied individuals soon and then move onto clinical trials to test its usability by people with high-level spinal cord injuries.

In recent months, Ghovanloo and his team have recruited 11 individuals with high-level to test the headset version of the system at the Atlanta-based Shepherd Center and the Rehabilitation Institute of Chicago. Trial participants received a clinical tongue piercing and tongue stud that contained a tiny magnet embedded in the upper ball. They repeated two test sessions per week during a six-week period that assessed their ability to use the Tongue Drive System to operate a computer and navigate an electric wheelchair through an obstacle course.

"During the trials, users have been able to learn to use the system, move the computer cursor quicker and with more accuracy, and maneuver through the obstacle course faster and with fewer collisions," said Ghovanloo. "We expect even better results in the future when trial participants begin to use the intraoral Tongue Drive System on a daily basis."

Explore further: Minimally invasive surgery with hydraulic assistance

Related Stories

Wheelchair follows orders, but can act on its own, too

May 25, 2011

Five Northeastern University engineering seniors have developed an innovative, voice-operated wheelchair that can navigate through a cluttered room, move alongside walls and detect stairwells and other obstacles ...

Cats versus dogs in the 'drinking' category (w/ video)

May 26, 2011

(PhysOrg.com) -- The competition between cat and dog owners has one or the other always looking for an advantage and cat owners thought they had one last year when Pedro Reis and Roman Stocker from MIT discovered ...

Recommended for you

Desktop device to make key gun part goes on sale in US

11 hours ago

The creator of the world's first 3D plastic handgun unveiled Wednesday his latest invention: a pre-programmed milling machine that enables anyone to easily make the core component of a semi-automatic rifle.

Minimally invasive surgery with hydraulic assistance

17 hours ago

Endoscopic surgery requires great manual dexterity on the part of the operating surgeon. Future endoscopic instruments equipped with a hydraulic control system will provide added support during minimally ...

Analyzing gold and steel – rapidly and precisely

18 hours ago

Optical emission spectrometers are widely used in the steel industry but the instruments currently employed are relatively large and bulky. A novel sensor makes it possible to significantly reduce their size ...

More efficient transformer materials

19 hours ago

Almost every electronic device contains a transformer. An important material used in their construction is electrical steel. Researchers have found a way to improve the performance of electrical steel and ...

Sensor network tracks down illegal bomb-making

19 hours ago

Terrorists can manufacture bombs with relative ease, few aids and easily accessible materials such as synthetic fertilizer. Not always do security forces succeed in preventing the attacks and tracking down ...

Miniature camera may reduce accidents

19 hours ago

Measuring only a few cubic millimeters, a new type of camera module might soon be integrated into future driver assistance systems to help car drivers facing critical situations. The little gadget can be ...

User comments : 0