Shine a light instead of changing the battery

December 1, 2011

(PhysOrg.com) -- Pacemakers and other implanted medical devices require electric current to operate. Changing the battery requires an additional operation, which is an added stress on the patient. A Japanese team led by Eijiro Miyako at the National Institute of Advanced Industrial Science and Technology has now introduced an alternative approach in the journal Angewandte Chemie: an implantable converter that can simply be irradiated with laser light through the skin.

Bioelectronic devices help many patients to live longer and to experience a better quality of life. are not the only electronic implants used today; there are also "pain pacemakers" that alleviate severe chronic pain. These are neurostimulators that send directly to the spinal cord to block the signal pathway that transmits pain to the brain. Another example is the implantable drug pump, which can direct painkillers near the spinal cord or provide insulin for diabetics.

Such electronic implants are usually powered by that last at most ten years. The battery must then be changed in another operation. A rechargeable version is thus desirable. Various alternatives are currently available, such as electric cells that are driven by glucose within the body, or muscle-driven dynamos. The disadvantage is that the production of current cannot be controlled. Other approaches operate through electromagnetic current generation, but this can disrupt electronic devices in the vicinity.

The Japanese team has now developed an interesting alternative, a device that delivers current upon irradiation with a laser. At the heart of the system are very finely divided carbon nanotubes embedded in a silicon matrix. These absorb laser light and convert the very effectively to heat. This is in turn converted into electric current by the tiny device. This works through the Seebeck effect: in an made of two different conductors—in this case a special arrangement of semiconductor materials—a temperature difference between the contacts results in a small voltage. Only the side of the device coated with the silicon/carbon nanotube composite that gets irradiated heats up, which provides the required temperature difference. Because the carbon nanotubes absorb very well in a range of wavelengths that can pass through tissue, the device, which need be no larger than a half-centimeter cube, can be implanted under the skin. Simple irradiation should then allow it to generate enough voltage to charge the battery of a pacemaker or other device.

The researchers are now working on making the energy conversion of the device even more efficient and to increase its safety for medical applications.

Explore further: Heart's surplus energy may help power pacemakers, defibrillators

More information: Eijiro Miyako, A Photo-Thermal-Electrical Converter Based On Carbon Nanotubes for Bioelectronic Applications, Angewandte Chemie International Edition, dx.doi.org/10.1002/anie.201106136

Related Stories

MEMS device generates power from body heat

April 29, 2010

(PhysOrg.com) -- In an attempt to develop a power source that is compact, environmentally friendly, and has an unlimited lifetime, a team of researchers from Singapore has fabricated an energy harvesting device that generates ...

New miniature smart chip implant to combat chronic pain

December 15, 2010

(PhysOrg.com) -- Human trials will begin in Australia next year of a new device containing tiny smart chips which is implanted in the spinal cord or other nerves in the body to block pain signals and prevent them reaching ...

Self-cooling observed in graphene electronics

April 3, 2011

With the first observation of thermoelectric effects at graphene contacts, University of Illinois researchers found that graphene transistors have a nanoscale cooling effect that reduces their temperature.

Recommended for you

Reshaping the solar spectrum to turn light to electricity

July 28, 2015

When it comes to installing solar cells, labor cost and the cost of the land to house them constitute the bulk of the expense. The solar cells—made often of silicon or cadmium telluride—rarely cost more than 20 percent ...

Could stronger, tougher paper replace metal?

July 24, 2015

Researchers at the University of Maryland recently discovered that paper made of cellulose fibers is tougher and stronger the smaller the fibers get. For a long time, engineers have sought a material that is both strong (resistant ...

Changing the color of light

July 23, 2015

Researchers at the University of Delaware have received a $1 million grant from the W.M. Keck Foundation to explore a new idea that could improve solar cells, medical imaging and even cancer treatments. Simply put, they want ...

Wafer-thin material heralds future of wearable technology

July 27, 2015

UOW's Institute for Superconducting and Electronic Materials (ISEM) has successfully pioneered a way to construct a flexible, foldable and lightweight energy storage device that provides the building blocks for next-generation ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.