Self-organization gives rise to more efficient organic solar cells

Oct 24, 2011

Organic solar cells have the potential to convert sunlight into electrical energy in an economical and environmentally friendly fashion. The challenge is that they still work less efficiently than inorganic semiconductors. Ultrafast measurements on hybrid cells now reveal a route to double their efficiency.

The use of organic for the production of electricity from sunlight offers an attractive and promising basis for an innovative and environmentally friendly means of . They can be manufactured quite economically and, because they are as bendable as plastic wrap, they can be processed flexibly. The problem is that they are yet markedly less efficient than conventional inorganic semiconductor cells. The most crucial process in the conversion of light into electric current is the generation of free charge carriers. In the first step of photoconversion, upon absorption of light one component of the organic solar cell, usually a polymer, releases electrons that are taken up by the second component of the cell - in this case - and can then be transported further.

"The mechanisms and the timescale of charge separation have been the subject of controversial scientific debate for many years," says LMU physics professor Eberhard Riedle. In cooperation with investigators at the Technical University in Munich and at Bayreuth University, Riedle and his group have now been able to dissect the process in detail. To do so, the researchers used a novel hybrid cell type containing both organic and inorganic constituents, in which silicon serves as the electron acceptor. Based on the insights obtained with this system, they developed a processing strategy to improve the structural order of the polymer - and found that this enhances the efficiency of charge separation in organic semiconductors by up to twofold. Their findings provide a new way to optimize the performance of .

The key to this breakthrough lies in a unique, laser-based experimental setup, which combines extremely high temporal resolution of 40 femtoseconds (fs) with a very broadband detection. This allowed the team to follow the ultrafast processes induced by photon absorption in real time as they occur. Instead of the fullerenes used in typical organic cells, the researchers used silicon as the electron acceptor, a choice that has two major advantages.

"First, with these novel hybrid solar cells, we were able to probe the photophysical processes taking place in the polymer with greater precision than ever before, and secondly through the use of silicon, a much larger segment of the solar spectrum can be harnessed for electricity," says Riedle.

It turns out that free charge carriers – so called polarons – are not generated immediately upon photoexcitation, but with a delay of about 140 fs. Primary photoexcitation of a polymer molecule first leads to the formation of an excited state, called an exciton. This then dissociates, releasing an electron, which is then transferred to the electron acceptor. The loss of electrons leaves behind positively charged "holes" in the polymer and, as oppositely charged entities are attracted to one another by the Coulomb force, the two have a tendency to recombine.

"In order to obtain free charge carriers, electron and hole must both be sufficiently mobile to overcome the Coulomb force," explains Daniel Herrmann, the first author of the new study. The team was able to show, for the first time, that this is much easier to achieve in polymers with an ordered, regular structure than with polymers that are chaotically arranged. In other words, a high degree of self-organization of the polymer significantly increases the efficiency of .

"The polymer that we used is one of the few known to have a tendency to self-organize. This tendency can be inhibited, but one can also increase the polymer's intrinsic propensity for self-organization by choosing appropriate processing parameters," Herrmann explains. By cleverly optimizing the processing of the polymer P3HT, the researchers succeeded in doubling the yield of free – and thereby significantly enhancing the efficiency of their experimental .

Explore further: Tiny wires could provide a big energy boost

More information: "Role of Structural Order and Excess Energy on Ultrafast Free Charge Generation in Hybrid Polythiophene/Si Photovoltaics probed in Real Time by Near-Infrared Broadband Transient Absorption" D. Herrmann, S. Niesar, C. Scharsich, A. Köhler, M. Stutzmann, E. Riedle J. Am.Chem. Soc. online, 21. September 2011 dx.doi.org/10.1021/ja207887q

Related Stories

Current loss tracked down by magnetic fingerprint

Oct 26, 2010

Conventional solar cells made from crystalline silicon are difficult and energy-intensive to manufacture. Organic solar cells are cheaper, but have always produced less electricity. Why this is so has never been fully explained. ...

Recommended for you

Tiny wires could provide a big energy boost

18 hours ago

Wearable electronic devices for health and fitness monitoring are a rapidly growing area of consumer electronics; one of their biggest limitations is the capacity of their tiny batteries to deliver enough ...

Graphene sheets enable ultrasound transmitters

18 hours ago

University of California, Berkeley, physicists have used graphene to build lightweight ultrasonic loudspeakers and microphones, enabling people to mimic bats or dolphins' ability to use sound to communicate ...

Project uses crowd computing to improve water filtration

Jul 06, 2015

Nearly 800 million people worldwide don't have access to safe drinking water, and some 2.5 billion people live in precariously unsanitary conditions, according to the Centers for Disease Control and Prevention. ...

Engineering the world's smallest nanocrystal

Jul 06, 2015

In the natural world, proteins use the process of biomineralization to incorporate metallic elements into tissues, using it to create diverse materials such as seashells, teeth, and bones. However, the way ...

A stretchy mesh heater for sore muscles

Jul 03, 2015

If you suffer from chronic muscle pain a doctor will likely recommend for you to apply heat to the injury. But how do you effectively wrap that heat around a joint? Korean Scientists at the Center for Nanoparticle ...

Polymer mold makes perfect silicon nanostructures

Jul 03, 2015

Using molds to shape things is as old as humanity. In the Bronze Age, the copper-tin alloy was melted and cast into weapons in ceramic molds. Today, injection and extrusion molding shape hot liquids into ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.