Research improves performance of next-generation solar cell technology

Sep 18, 2011

Researchers from the University of Toronto, the King Abdullah University of Science & Technology (KAUST) and Pennsylvania State University (Penn State) have created the most efficient solar cell ever made based on collodial-quatum-dots (CQD). The discovery is reported in the latest issue of Nature Materials.

Quantum dots are nanoscale semiconductors that capture light and convert it into an energy source. Because of their small scale, the dots can be sprayed on to flexible surfaces, including plastics. This enables the production of that are less expensive to produce and more durable than the more widely-known silicon-based version. In the work highlighted by the Nature Materials paper entitled "Collodial-quantum-dot photovoltaics using atomic-ligand passivation," the researchers demonstrate how the wrappers that encapsulate the quantum dots can be shrunk to a mere layer of atoms.

"We figured out how to shrink the passivating materials to the smallest imaginable size," states Professor Ted Sargent, corresponding author on the work and holder of the Canada Research Chair in Nanotechnology at U of T.

A crucial challenge for the field has been striking a balance between convenience and performance. The ideal design is one that tightly packs the quantum dots together. The greater the distance between quantum dots, the lower the efficiency.

However the quantum dots are usually capped with organic molecules that add a nanometer or two. When working on a nanoscale, that is bulky. Yet the organic molecules have been an important ingredient in creating a colloid, which is a substance that is dispersed in another substance. This allows the quantum dots to be painted on to other surfaces.

To solve the problem, the researchers have turned to inorganic ligands, which bind the quantum dots together while using less space. The result is the same colloid characteristics but without the bulky organic molecules.

"We wrapped a single layer of atoms around each particle. As a result, they packed the quantum dots into a very dense solid," explains Dr. Jiang Tang, the first author of the paper who conducted the research while a post-doctoral fellow in The Edward S. Rogers Department of Electrical & Computer Engineering at U of T.

The team showed the highest electrical currents, and the highest overall power conversion efficiency, ever seen in CQD solar cells. The performance results were certified by an external laboratory, Newport, that is accredited by the US National Renewable Energy Laboratory.

"The team proved that we were able to remove charge traps - locations where electrons get stuck - while still packing the quantum dots closely together," says Professor John Asbury of Penn State, a co-author of the work.

The combination of close packing and charge trap elimination enabled electrons to move rapidly and smoothly through the solar cells, thus providing record efficiency.

"This finding proves the power of inorganic ligands in building practical devices," states Professor Dmitri Talapin of The University of Chicago, who is a research leader in the field. "This new surface chemistry provides the path toward both efficient and stable quantum dot solar cells. It should also impact other electronic and optoelectronic devices that utilize colloidal nanocrystals. Advantages of the all-inorganic approach include vastly improved electronic transport and a path to long-term stability."

"At KAUST we were able to visualize, with incredible resolution on the sub-nanometer lengthscale, the structure and composition of this remarkable new class of materials," states Professor Aram Amassian of KAUST, a co-author on the work.

"We proved that the inorganic passivants were tightly correlated with the location of the ; and that it was this new approach to chemical passivation, rather than nanocrystal ordering, that led to this record-breaking colloidal quantum dot solar cell performance," he adds.

As a result of the potential of this research discovery, a technology licensing agreement has been signed by U of T and KAUST, brokered by MaRS Innovations (MI), which will will enable the global commercialization of this new technology.

"The world - and the marketplace - need solar innovations that break the existing compromise between performance and cost. Through U of T's, MI's, and KAUST's partnership, we are poised to translate exciting research into tangible innovations that can be commercialized," said Sargent.

Explore further: Scientists unveil new technology to better understand small clusters of atoms

Related Stories

New inexpensive solar cell design

Aug 03, 2010

One of the most promising technologies for making inexpensive but reasonably efficient solar photovoltaic cells just got much cheaper. Scientists at the University of Toronto in Canada have shown that inexpensive nickel can ...

Researchers crack full-spectrum solar challenge

Jun 26, 2011

In a paper published in Nature Photonics, U of T Engineering researchers report a new solar cell that may pave the way to inexpensive coatings that efficiently convert the sun's rays to electricity.

Quantum Dots Could Boost Solar Cell Efficiency

Mar 11, 2009

(PhysOrg.com) -- The transition to environmentally benign energy sources is one of the most significant challenges of the 21st century. Solar power, which uses sunlight to generate electricity, is one promising source. It ...

Recommended for you

Relaxing DNA strands by using nano-channels

17 hours ago

A simple and effective way of unravelling the often tangled mass of DNA is to 'thread' the strand into a nano-channel. A study carried out with the participation of the International School for Advanced Studies ...

Сalculations with nanoscale smart particles

Aug 19, 2014

Researchers from the Institute of General Physics of the Russian Academy of Sciences, the Institute of Bioorganic Chemistry of the Russian Academy of Sciences and MIPT have made an important step towards ...

Nanostructure enlightening dendrite-free metal anode

Aug 19, 2014

Graphite anodes have been widely used for lithium ion batteries (LIBs) during the past two decades. The replacement of metallic lithium with graphite enables safe and highly efficient operation of LIBs, however, ...

Bacterial nanowires: Not what we thought they were

Aug 18, 2014

For the past 10 years, scientists have been fascinated by a type of "electric bacteria" that shoots out long tendrils like electric wires, using them to power themselves and transfer electricity to a variety ...

User comments : 4

Adjust slider to filter visible comments by rank

Display comments: newest first

Humpty
3 / 5 (2) Sep 18, 2011
Yeah and?

How many watts / volts / per meter squared?
Sonhouse
not rated yet Sep 18, 2011
At this point in time, it may be how many MILLIwatts per square M.
aennen
not rated yet Sep 19, 2011
Yada yada yada, as many articles as i have seen on solar cell improvements here we should be at such a hight rate of effeciency to run anything we want by now.
hemitite
5 / 5 (1) Sep 19, 2011
By the way they danced around giving the actual performance numbers, I would guess the efficiency to be around 3%. On the other hand, S. Arabia has a lot of wasteland bathed in sunlight, so the efficiency may be less important to them than the price per sq meter.