Tunnel view of how electrons play

Jun 21, 2011
An almost perfect surface: The image shows a regularly ordered layer of silicon atoms with a defect where a silicon atom is replaced by a bigger ytterbium atom. In the sample surfaces examined by the Dresden physicists there are only 70 defects among around 30,000 atoms - ideal conditions for convincing measurements. © Steffen Wirth / MPI for Chemical Physics of Solids

(PhysOrg.com) -- Electrons behave like football teams: the match becomes interesting when the teamwork is as good as that conjured up by the players of FC Barcelona. Electrons which interact strongly with each other give rise to superconductivity, the lossless transport of current, for example. A team headed by researchers at the Max Planck Institute for Chemical Physics of Solids in Dresden is now taking a completely new look at the teamwork between electrons. They have used a scanning tunnelling microscope to investigate the Kondo effect in the metal ytterbium rhodium silicide YbRh2Si2, which contains unpaired electrons and thus magnetic moments. At low temperatures, the strong interactions between the electrons completely shield the magnetic moments from each other. The Dresden-based physicists have now observed how this shielding is created. Their work also shows how well electronic processes in solids can be investigated with scanning tunnelling microscopes.

Events in bodies only become interesting when the temperature drops far below freezing, as the atoms then oscillate more slowly and interfere less with the motion of the electrons. The therefore experience the forces between each other much more intensely and become aware that they have completely different possibilities apart from conducting electricity or not conducting it. In order to gain a better understanding of the electronic processes in solids, which are the basis of , communications and modern medical engineering, physicists also investigate the extraordinary effects that electrons in solids display at low temperatures. In future, this understanding may possibly help to produce materials with new properties that may be interesting for technical developments.

“With our current work, we are opening a door that provides us with a completely new way of accessing a large number of electronic phenomena in solids,” says Steffen Wirth, who headed the study. The investigation involved not only the researchers of the Max Planck Institute for Chemical Physics of Solids, but also scientists from the Max Planck Institute for the Physics of Complex Systems, also in Dresden, and the Technical University Braunschweig. The team investigated the metal ytterbium rhodium silicide YbRh2Si2 with a as they slowly cooled down the metal.

Physicists also call the material heavy fermion metal; they often talk of fermions when they mean certain properties of electrons. The charged particles are naturally very light but become heavy as a result of the extraordinary effects that are based on the strong interplay of the electrons. The main players here are unpaired localized electrons, i.e. electrons which are firmly bound to the rare earth metal ytterbium. These electrons can occupy any of four groups of 4f orbitals, each with a different shape, assist with the transport of current in the material and have magnetic moments – these are the properties that arouse physicists’ interest.

The Dresden-based researchers have now shown that the interplay between the localized 4f electrons and the freely moving conduction electrons of the material can be observed with a scanning tunnelling microscope. This reveals a great deal about the causes of the effects, and thus about the physical laws in such materials.

Microscope with built-in sample cleavage mechanism: The commercial scanning tunnelling microscope (left) allows measurements at low temperatures. It contains a device with which parts of the sample can be broken away to produce a surface which is as clean as possible and contains as few defects as possible. The physicists use a rod (top right) to knock off a small screw which has been bonded to the sample, thus taking a few layers of the material with it. The screw almost completely covers the sample, which is bonded to a ceramic holder (bottom right). © Steffen Wirth / MPI for Chemical Physics of Solids

The investigation involves positioning the tip of the microscope above a sample surface made up of very well ordered silicon atoms situated one next to the other (see Background: Purity law for a sample surface). The researchers then measure how the tunnelling current depends on the voltage applied at different temperatures. The more they cool the sample, the more marked is the appearance of several peaks and a deep dip in the current-voltage curve. These peaks and troughs in the measured current tell the researchers what happens to the electrons in the material. It is not always easy to interpret the characteristics in the current-voltage curve, however.

At low temperatures, quasi-particles are formed

“We can unequivocally assign the three peaks which occur at distinct energies,” says Steffen Wirth. Thus at – 17, – 27 and – 43 millivolts relatively large numbers of electrons tunnel from the sample to the microscope tip. These voltages correspond to energies where the electrons collect more or less in bands. The bands are caused by the crystal field splitting: if the 4f electrons of the ytterbium choose to occupy those orbital groups of the four possible ones where they avoid neighbouring atoms in the crystal as much as possible, they save energy. The corresponding band is therefore at lower energies than one where the electrons may meet their neighbours in the crystal. The effect itself has been known for quite a while. “We are the first to observe the crystal field splitting in the scanning tunnelling microscope,” says Steffen Wirth.  From these bands with the different energies the electrons then tunnel into the microscope tip.

The fact that the crystal field splitting becomes visible in the tunnelling microscope also shows the researchers that they are measuring not only surface properties, but mostly properties of the interior of their samples. “This was not clear before the investigation,” says Steffen Wirth. Scanning tunnelling microscopes are particularly sensitive to the characteristics of the surface and everything which lies or happens on it. It could also have been the case that the physicists saw only special effects of the surface. “We can now exclude this,” says Wirth.

This is also one of the reasons why the physicists in Dresden are quite confident in their explanation as to why the tunnelling current collapses when the voltage decreases to zero. At low temperatures, hardly any current continues to flow between the sample and the tip of the tunnelling microscope. The researchers put this decrease down to the Kondo effect on individual ytterbium atoms – the very phenomenon which the experiments were actually designed to investigate.

The 4f electrons, which are localized at the ytterbium atoms, rotate about their own axis and thus create the usual magnetic moments of the ytterbium atoms – physicists call this rotation spin. The Kondo effect causes the conduction electrons, which transport the current, to form quasi-particles with these magnetic moments at around minus 170 degrees Celsius. These quasi-particles can possibly be visualized as a cloud of the local magnetic moments and the conduction electrons surrounding them. The spins of the conduction electrons here are oriented in precisely the opposite direction to the spins of the local 4f electrons and thus shield the of the 4f electrons. Since the quasi-particles are relatively heavy compared to an individual electron, the heavy fermion metals have been named after them.

“We assume that fewer and fewer conduction electrons contribute to the tunnelling conductivity at temperatures below minus 170 degrees Celsius, because they are increasingly bound in quasi-particles,” says Steffen Wirth. “We therefore take the decrease of the tunnelling current to be strong evidence for the Kondo effect.”

Wirth and his colleagues can interpret the final conspicuous detail of the tunnelling current curve with less clarity: a hump at - 6 millivolts, which only occurs below minus 245 degrees Celsius, but markedly dents the current-voltage curve at minus 268 degrees Celsius. “We interpret this as an indication of a Kondo lattice,” says Steffen Wirth. Quasi-particles formed by the Kondo effect join together to form a Kondo lattice. The quasi-particles then cease to lead an isolated existence in the material, but interact with each other. This process also leads them to form an energy band, in which the mixture of 4f and conduction electrons likes to be – this is the assumption.

“Whether a Kondo lattice exists and when it forms is a very controversial issue,” says Steffen Wirth. Some physicists assume that the lattice forms before the quasi-particles. “I cannot imagine that physically,” says Steffen Wirth: “And we actually observe the decrease of the tunnelling current at higher temperatures than the signal which we assume to be caused by the Kondo lattice,” explains Wirth. If the interpretation of the signal at – 6 millivolts is correct, the quasi-particles would only form a lattice after they have been produced, as corresponds to the natural sequence of cause and effect.

More than enough possibilities in the lifetime of one researcher

It is precisely the interpretation of the signal at – 6 millivolts where the Dresden physicists are not quite certain; calculations which they have done in parallel to their experiments predict the signal will be at around – 2 millivolts. The researchers find the signals of the crystal field splitting at exactly the position where they should be in theory. “It is therefore not clear whether we are really seeing the band of the Kondo lattice,” says Wirth.

The physicists now intend to investigate the discrepancy in more detail; however, this is not the only direction they can now follow. “After our initial investigation with a scanning tunnelling microscope provided such a detailed image of the electronic structure of heavy fermion metals, we now have more possibilities than can be covered in the lifetime of one researcher,” says Steffen Wirth. He and his colleagues therefore want to find out what the current-voltage curve looks like when ytterbium rather than silicon forms the top atomic layer. The researchers also want to add traces of further elements to the ytterbium rhodium silicide, which would probably change its electronic properties considerably. In addition, the researchers want to measure the tunnelling current at temperatures far below minus 268 degrees Celsius. This is where the Kondo effect is assumed to break down, and the 4f take on an anti-ferromagnetic order.

“If we expand the method further, we may also be able to make a contribution to explaining the unconventional superconductivity in heavy fermion metals,” says Steffen Wirth. And that would provide a relatively strong clue as to how so-called high-temperature superconductivity comes about. This is promising in technical terms, although it still begins at temperatures far below freezing. Only when physicists accurately understand its causes can they look for materials that lose their resistance under ordinary conditions.

Background: purity law for a sample surface

In order for the experiments with the scanning tunnelling microscope to succeed, the physicists require samples with almost flawless surfaces: the atoms must also align themselves on the surface to form the same, completely regular lattice as is found in the bulk of the sample. The Dresden-based researchers produce these sample surfaces by bonding a tiny stamp smaller than the head of a knitting needle onto their samples. They then knock off the stamp with a precisely executed blow from a punch – and hope that the stamp takes a portion of the sample with it, leaving behind a clean surface with a regular composition. This is now a matter of routine for the researchers.

The only question that remains concerns the site at which the sample breaks. This determines the composition of the surface created. In scanning tunnelling microscope all atoms appear the same. Although there are a large number of methods to determine the type of atom, they are not available in the ultra-high vacuum chamber of the scanning tunnelling microscope, and to bring the sample from one instrument into another one would immediately contaminate the surface. The researchers in Dresden therefore use indirect means to deduce the composition of the surface. The crystal structure tells them that above an ytterbium layer there is a silicon layer, then a rhodium layer, another silicon layer and then an ytterbium layer again, after which the stacking sequence repeats itself. The bonds between the rhodium atoms and the silicon atoms which surround them do not break open, and the researchers know this. This means that the top atomic layer either consists of silicon or ytterbium atoms. In order to differentiate between the two layers, the researchers are assisted by the fact that even the best crystal is not perfect, and that ytterbium atoms are slightly bigger than silicon and rhodium atoms. Therefore, if a silicon or rhodium atom, which really does not belong there, is incorporated into an ytterbium layer every now and then, the defect can always be seen as a dent. A silicon layer, in contrast, has dents, as well as humps. And this was precisely the case in most of the samples examined by the scientists in Dresden. On a surface of around 30,000 atoms, the number of defects was limited to a mere 70 – the material was therefore ideal for determining the electronic properties of pure ytterbium rhodium .

Explore further: New multiscale model unifies physical laws of water flow to span all scales

More information: Stefan Ernst, Stefan Kirchner, Cornelius Krellner, Christoph Geibel, Gertrud Zwicknagl, Frank Steglich und Steffen Wirth, Emerging local Kondo screening and spatial coherence in the heavy fermion metal YbRh2Si2,
Nature, 16 June 2011; doi: 10.1038/nature10148

Related Stories

Nano-sonar uses electrons to measure under the surface

Feb 27, 2009

Just as sonar sends out sound waves to explore the hidden depths of the ocean, electrons can be used by scanning tunnelling microscopes to investigate the well-hidden properties of the atomic lattice of metals. ...

Experiments Prove Existence of Atomic Chain Anchors

Feb 03, 2005

Atoms at the ends of self-assembled atomic chains act like anchors with lower energy levels than the “links” in the chain, according to new measurements by physicists at the National Institute of Standards ...

A new dimension in materials research

May 26, 2011

(PhysOrg.com) -- In the future, physicists will be able to follow a new lead in their search for new materials for electronic components, for example. An international team of researchers headed by scientists ...

Magnetism relieves electrons of their resistance

Dec 13, 2010

(PhysOrg.com) -- Physics is sometimes just like a criminal investigation. Researchers gather one piece of evidence after another in order to solve a mystery - for example, the question as to how unconventional ...

A quantum pen for single atoms

Mar 23, 2011

(PhysOrg.com) -- German physicists at the Max Planck Institute of Quantum Optics succeeded in manipulating atoms individually in a lattice of light and in arranging them in arbitrary patterns. These results ...

Recommended for you

Atom probe assisted dating of oldest piece of earth

1 hour ago

(Phys.org) —It's a scientific axiom: big claims require extra-solid evidence. So there were skeptics in 2001 when University of Wisconsin-Madison geoscience professor John Valley dated an ancient crystal ...

Could 'Jedi Putter' be the force golfers need?

Apr 18, 2014

Putting is arguably the most important skill in golf; in fact, it's been described as a game within a game. Now a team of Rice engineering students has devised a training putter that offers golfers audio, ...

Better thermal-imaging lens from waste sulfur

Apr 17, 2014

Sulfur left over from refining fossil fuels can be transformed into cheap, lightweight, plastic lenses for infrared devices, including night-vision goggles, a University of Arizona-led international team ...

User comments : 1

Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Jun 22, 2011
it s wrong because u said FC.Barce u did should said C.F.Real Madrid !!! :-p

More news stories

Atom probe assisted dating of oldest piece of earth

(Phys.org) —It's a scientific axiom: big claims require extra-solid evidence. So there were skeptics in 2001 when University of Wisconsin-Madison geoscience professor John Valley dated an ancient crystal ...

Meth mouth menace

Something was up in Idaho. While visiting a friend in Athol, a small town north of Coeur d'Alene, Jennifer Towers, director of research affairs at the Tufts University School of Dental Medicine, noticed ...