Plasma: The trouble with bubbles

Jun 24, 2011
Plasma © Alain Herzog

Controlling a boiling plasma at several million degrees Celsius – that's the challenge of nuclear fusion, our great energy hope for the future. EPFL's Plasma Physics Research Center (CRPP) has just published two scientific articles that advance the state of knowledge in the domain.

If plasmas can be controlled, then it may one day be possible to use nuclear fusion as an energy source. As in stars, however, this ultra-hot material is constantly boiling, which makes it hard to control in a reactor. Instabilities in the create bubble-like “blobs” that, upon bursting, can damage the internal walls of the reactor. Scientists are trying to find ways to stabilize plasmas from the inner core out to the surface. Two CRPP teams have recently made progress in this area by improving our understanding of these instabilities.

On the surface

Surface instabilities appear as filaments. Physicists have observed that these structures originate from waves propagating in the plasma. They worked out the wave dynamics, and then precisely measured the filaments’ properties (electrical, in particular), using instruments capable of taking 250,000 images per second. These measurements represent a major accomplishment, because the filaments, only a few centimeters long, move at a speed of one to two kilometers a second, are at a temperature of nearly 50,000°C and hold the energy of a 10-ton truck going at 80 km/hour. The researchers nonetheless managed to observe that the filaments carried their own current. They thus confirmed the theory proposed by Christian Theiler as part of his PhD research at the CRPP.

Thanks to this discovery, it will be possible to apply voltage directly to the filaments. Ivo Furno, who led the experiment, explains: “It is very difficult to prevent them from forming, but it may be possible to control their speed and trajectory.” Given the plasma’s elevated temperature, it is necessary to act on it without direct contact to control the filaments, which makes this technique particularly promising. The discovery will have a very important impact on research, because filaments appear in all plasmas in “tokamaks”, or nuclear fusion reactors. In fact, controlling the behavior of the filaments in the ITER tokamak is considered a gauge of the project’s success.

In the core

Reactors like EPFL’s TCV have a plasma core that is maintained at extremely high temperatures – up to a hundred million degrees – as long as possible, in order to generate fusion reactions. To do this, physicists confine the plasma using magnetic fields. Despite their efforts, hot blobs are still created in the core, and the danger is that several blobs could combine and eventually escape to the surface.

A group of scientists led by Timothy Goodman has - for the first time - managed to concentrate radiation equivalent to a thousand microwave ovens with a precision of just a few millimeters, using a set of mirrors that can be adjusted in real time. With this powerful beam they were able to prevent the blobs from aggregating, without disturbing the reactions taking place in the plasma core.

“Like surgeons, physicists must intervene in the plasma in the least invasive manner possible to guarantee its stability,” adds Ambroglio Fasoli, the EPFL Professor responsible for the two teams. This research marks a new step in the journey towards controlling nuclear fusion. And its arrival is timely; not only is conventional nuclear power (fission) under considerable scrutiny, but fusion is also being called upon to provide proof of its potential. “We can’t just sit back and watch. We also have to control the reactions,” concludes the physicist. And so physics takes another step forward.

Explore further: New filter could advance terahertz data transmission

More information:
Direct Two-Dimensional Measurements of the Field-Aligned Current Associated with Plasma Blobs, I. Furno, M. Spolaore, C. Theiler, N. Vianello, R. Cavazzana, and A. Fasoli, Physical Review Letters, vol. 106, 2011.

Sawtooth Pacing by Real-Time Auxiliary Power Control in a Tokamak Plasma, T. P. Goodman, F. Felici, O. Sauter, and J. P. Graves (the TCV Team), Physical Review Letters, vol. 106, 2011.

Provided by Ecole Polytechnique Federale de Lausanne

5 /5 (9 votes)
add to favorites email to friend print save as pdf

Related Stories

Wave power could contain fusion plasma

Jan 10, 2011

Researchers at the University of Warwick’s Centre for Fusion Space and Astrophysics and the UK Atomic Energy Authority’s Culham Centre for Fusion Energy may have found a way to channel the flux and fury of a nuclear ...

Taming thermonuclear plasma with a snowflake

Nov 08, 2010

Physicists working on the National Spherical Torus Experiment (NSTX) at the Princeton Plasma Physics Laboratory are now one step closer to solving one of the grand challenges of magnetic fusion research -- ...

Sensors pave the way to using energy from the stars

May 30, 2011

( -- The international ITER project is setting out to store the energy of stars in a reactor. To meet this challenge, scientists must be able to measure the properties of matter in fusion. A team ...

Recommended for you

New filter could advance terahertz data transmission

Feb 27, 2015

University of Utah engineers have discovered a new approach for designing filters capable of separating different frequencies in the terahertz spectrum, the next generation of communications bandwidth that ...

The super-resolution revolution

Feb 27, 2015

Cambridge scientists are part of a resolution revolution. Building powerful instruments that shatter the physical limits of optical microscopy, they are beginning to watch molecular processes as they happen, ...

A new X-ray microscope for nanoscale imaging

Feb 27, 2015

Delivering the capability to image nanostructures and chemical reactions down to nanometer resolution requires a new class of x-ray microscope that can perform precision microscopy experiments using ultra-bright ...

Top-precision optical atomic clock starts ticking

Feb 26, 2015

A state-of-the-art optical atomic clock, collaboratively developed by scientists from the University of Warsaw, Jagiellonian University, and Nicolaus Copernicus University, is now "ticking away" at the National ...

User comments : 7

Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Jun 24, 2011
Up to now, I still don't understand why people insist so much on dead end fusion researches such as magnetized toroidal plasmas, while electrostatic fusion machines seem to be a more promising path to harness fusion energy.
5 / 5 (1) Jun 24, 2011
containing the plasma is a major issue, and until a lower energy option turns out to be viable, the big reactor designs are just as plausible as the next, albeit more expensive. I think this research is important to all types of fusion reactions. Whether one design wins out over another is not my concern - my concern is that breakthroughs continue to be made so that cross pollination can occur and finally get us to the goal.

Regardless of the crappy results fusion research has brought us so far, the fact is, all types of fusion reactor designs have gotten significantly better, and hopefully eventually, we will have a commercially viable fusion powerplant.
not rated yet Jun 24, 2011
the problem of producing net energy, is not a problem of starting fusion, it is that of sustaining it for long periods.
electrostatic fusion cannot do that, and never will be able to do that.
not rated yet Jun 25, 2011
One breakthrough after another they will advance the fusion reactor into operation.
I mean we already produce massive amounts of energy in the H-bomb and there is no reason not to be able to tame this massive energy release.
not rated yet Jun 25, 2011
Recently NASA has reported kind of 'foam made of bubbles' 160 million kilometers of radius) on the edge of our heliosphere:
They explain this complication by reconnections of magnetic field lines - maybe the mechanism responsible for bubbles in e.g. tokamak is not only based on filaments of ionized medium, but also on such 'magnetic flux ropes' like in the corona?
not rated yet Jun 26, 2011
sustaining it for long periods.

Why does is need to be sustained ? What's wrong with a pulsed fusion approach, like DPF ?
not rated yet Jun 26, 2011
The cold fusion is the only viable approach to fusion by now. If it works, it has no meaning to spend billions in hot fusion research - until we aren't masochists, indeed.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.