Microstructure-induced biomechanical responses of dragonfly wing veins

Jun 03, 2011
Simulation results of a dragonfly forewing. (a) model of the wing; (b) von Mises stress distribution during flapping; (c) dimensional changes during flight. Credit: © science china press

Wang's research team discovered the sandwich microstructure of dragonfly wing veins1 and recently revealed the organic junction between these longitudinal veins and membranes of the dragonfly wing2. Based on observed microstructural model and previously reported model about the main longitudinal veins and membrane, in which the former is based on the tubular model with sandwich structure in thickness of tubular, and the latter is based on the sample tubular model with the same material in thickness of tubular, they were used to simulate and characterize the biomechanical responses of dragonfly wings under symmetrical loading.

The results indicated that the effect of different microstructural models on the flapping frequency, trajectories, and corrugated and torsional behaviors of the wing cannot be ignored. This is because the sandwich , consisting of soft matter with fibers in the protein layer and in the chitin layer, of the longitudinal vein plays an important role in improving by creating self-adaptability in the flapping, torsion and camber variations of the wing as it twists. Understanding the complete structure of the wing, including the microstructural features and the organic junction between veins and membranes, provides new insight into the flight mechanism of the dragonfly and the wing's biomechanical responses, as shown by the study reported in issue 56 of the Chinese Science Bulletin and to be reported in the future.

Microstructure of the longitudinal vein and membrane. (a) sandwich structure; (b) hierarchical structure in nano- and meso- scales; (c) organic junction model of both the vein and membrane. Credit: ©science china press

Some of the results reported by this study are shown in Figures 1 and 2.

The organic junction with the hierarchical microstructure optimizes the dragonfly wing's including to the strength, stiffness and toughness (see Figure 1). The organic junctions enable the corrugation of the total wing along the chord direction, which improves the warping rigidity, while the hierarchical microstructure at the in the thickness of chitin layer increases the flapping strength of the wing and lift coefficients, but not the torsional rigidity of wing. As the dragonfly wings twist during flapping process, the soft matter with fibers in the protein layer at the micro scale assists the turning performance and allows structural responses between the longitudinal veins and membranes that form the camber of the wing during the three dimensional changes. The camber and zigzag cross-section along the chord direction could enhance the aerodynamic efficiency of the wing 3 by creating more vortices under upstrokes and downstrokes, as shown in Figure 2. Moreover, the corrugated wing has an important effect on torsion deformation under sample aerodynamic loading, and it is more flexible than a wing without sandwich longitudinal veins. Thus, the organic junction between the vein and membrane contributes to the dragonfly wing's remarkable biomechanical behavior.

In addition, with the help of these two salient features, the wing can easily adjust the its chordwise length by changing the corrugated angle and allowing response to different flight environments. Although it is highly speculative, we believe that the wing possesses some self-adaptabilities to cope with the challenges of flight. From the view of energy, the authors suggest that this kind of self-adaptability helps the dragonfly reduce the amount of energy consumed during flight. Potentially, this research could inspire engineers to design self-adaptable and energy-saving flexible wings for micro aerial vehicles.

Explore further: An innovative system anticipates driver fatigue in the vehicle to prevent accidents

More information: 1. Wang et al. Compos Sci & Technol, 2008; 68: 186-192
2. Chen and Wang et al. Chinese Sci Bull, 2011; 56: 1658-1660
3. Ennos AR. J Exp Bio, 1988, 140: 137-160; Sane SP. J Exp Bio, 2003; 206: 4191-4208

add to favorites email to friend print save as pdf

Related Stories

Artificial butterfly in flight and filmed (w/ Video)

May 20, 2010

A group of Japanese researchers, who publish their findings today in Bioinspiration & Biomimetics, have succeeded in building a fully functional replica model - an ornithopter - of a swallowtail butterfly, and they have f ...

Scientist uses dragonflies to better understand flight

Feb 20, 2006

If mastering flight is your goal, you can't do better than to emulate a dragonfly. With four wings instead of the standard two and an unusual pitching stroke that allows the bug to hover and even shift into ...

Micro flying robots can fly more effectively than flies

Aug 01, 2009

There is a long held belief among engineers and biologists that micro flying robots that fly like airplanes and helicopters consume much more energy than micro robots that fly like flies. A new study now shows ...

Recommended for you

Student develops filter for clean water around the world

18 hours ago

Roughly 780 million people around the world have no access to clean drinking water. According to the World Health Organization (WHO), 3.4 million people die from water-related diseases every year. ETH student Jeremy Nussbaumer ...

Minimising drag to maximise results

22 hours ago

One of the most exciting parts of the Tour de France for spectators is the tactical vying for spots in the breakaway group at the front of the pack.

User comments : 0