New approach to modeling power system aims for better monitoring and control of blackouts

Jan 12, 2011

Major power outages are fairly infrequent, but when they happen they can result in billions of dollars in costs – and even contribute to fatalities. Now research from North Carolina State University has led to the development of an approach by which high-resolution power-system measurements, also referred to as Synchrophasors, can be efficiently used to develop reliable models of large power systems, which would help us keep an eye on their health.

Synchrophasors are real-time measurements of voltages and currents that provide a very high-resolution view of various complex events occurring in a power system. They are measured by sophisticated digital recording devices called phasor measurement units (PMUs). "PMUs are comparable to surveillance cameras that continuously monitor the complex dynamics of groups of people in busy places, and indicate how different people respond and interact with each other," says Dr. Aranya Chakrabortty, lead author of a paper describing the research and an assistant professor of electrical and computer engineering at NC State.

"This research is a major step toward helping us understand how Synchrophasor technology can be used to model the complex behavior of any large, geographically distributed power system, especially taking into account the system's interconnected nature," Chakrabortty says.

"We need to have a better understanding of how a disturbance entering one generation cluster – or localized group of nodes – may spread across the entire system, creating havoc in its neighboring clusters as well," Chakrabortty says. "More importantly, we need to investigate if the speed of this spread is dictated by the way these clusters are connected to each other." The North American power grid is divided into four distinct operating zones, each of which has several such generation pockets, Chakrabortty explains, across which a disturbance can disseminate very easily.

For example, during the 2003 Northeast Blackout, generating units in Ohio and New England appeared to be functioning smoothly. However, there was significant disparity between the two regions when it came to reactive power – which is a byproduct of generating electricity. That disparity created a cascading series of "voltage collapse" events – which cut off power to approximately 50 million people, was linked to multiple fatalities and cost an estimated $4 to 10 billion. The event highlighted the need for monitoring the system globally, rather than focusing on individual nodes in isolation.

"In order to understand how the effects of major disturbances can propagate across the North American power system, we need highly reliable and rigorous mathematical models that capture the dynamics of its various clusters, as well as the way those dynamics will evolve when the clusters are connected to each other in the overall system," Chakrabortty says. "Traditional measurement methods in power systems are too slow and, therefore, incapable of capturing these dynamics, which can change dramatically in fractions of a second. With the Synchrophasor technology today such models are possible."

Chakrabortty and his co-authors from Rensselaer Polytechnic Institute (RPI) and Southern California Edison have developed an approach for creating cluster models, which uses Synchrophasors from PMUs located at specific points within a cluster of nodes. The approach also allows one to identify how the clusters are connected to each other by comparing PMU measurements at different points in the system. "Once you have modeled the clusters and determined their connections," Chakrabortty says, "our algorithm enables you to model the interactive behavior of the clusters within the larger system in the face of large disturbances. We also show how to place PMUs optimally at the nodes so as to extract maximum amount of useful information for better modeling.

"Our models are informative, yet easy to compute," Chakrabortty adds. "They will help power-system operators track and predict the global health of any distributed in real time so that catastrophes such as the 2003 blackout can be prevented in the future. The study will lead to an entirely new vision of monitoring and controlling the North American grid, which is becoming more expansive, and, more chaotic day by day."

Explore further: Off-world manufacturing is a go with space printer

More information: The paper, "A Measurement-based Framework for Dynamic Equivalencing of Large Power Systems using Wide-Area Phasor Measurements," was co-authored by Dr. Joe Chow of RPI and Armando Salazar of Southern California Edison. The paper is published online in IEEE Transactions on Smart Grid.

Related Stories

Vulnerability of US power grid identified

Sep 03, 2004

Vulnerabilities inadvertently built into the U.S. power grid, which is one of the most complex systems ever constructed, have been identified by a research team lead by Reka Albert, assistant professor of physics at Penn ...

Bringing down the electric grid

Oct 12, 2010

Last March, the U.S. Congress heard testimony about a scientific study in the journal Safety Science. A military analyst worried that the paper presented a model of how an attack on a small, unimportant part o ...

Argonne gets wind of new energy models

Jan 11, 2010

(PhysOrg.com) -- Sailors and golfers aren't the only people interested in knowing how much the wind blows; people who run wind farms need to know too.

Report examines limits of national power grid simulations

May 07, 2009

America's power grid today resembles the country's canal system of the 19th Century. A marvel of engineering for its time, the canal system eventually could not keep pace with the growing demands of transcontinental transportation.

Recommended for you

Off-world manufacturing is a go with space printer

4 hours ago

On Friday, the BBC reported on a NASA email exchange with a space station which involved astronauts on the International Space Station using their 3-D printer to make a wrench from instructions sent up in ...

First drone in Nevada test program crashes in demo

20 hours ago

A drone testing program in Nevada is off to a bumpy start after the first unmanned aircraft authorized to fly without Federal Aviation Administration supervision crashed during a ceremony in Boulder City.

Fully automated: Thousands of blood samples every hour

Dec 19, 2014

Siemens is supplying automation technology for the longest and one of the most cutting-edge sample processing lines in any clinical laboratory. The line, or automation track, 200 meters long, in Marlborough, ...

Explainer: What is 4-D printing?

Dec 19, 2014

Additive manufacturing – or 3D printing – is 30 years old this year. Today, it's found not just in industry but in households, as the price of 3D printers has fallen below US$1,000. Knowing you can p ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.