New nanotube material stays rubbery over a more than 1,000 degree temperature range

December 6, 2010 by Lin Edwards report
Flexible carbon nanotube material. Scale bar is 1mm. Image credi: Science, DOI:10.1126/science.1194865

(PhysOrg.com) -- Silicone rubber is used in many applications in which a material is required to remain rubbery over a wide temperature range, since it retains its properties over the approximate range of -55°C to 300°C. Now a new material made of carbon nanotubes has been developed that retains its viscoelastic properties over a temperature range almost four times larger.

Scientists at the National Institute of Advanced Industrial Science and Technology (AIST) in Tsukuba, Japan created the nanotube material using chemical vapor deposition. The material has elastic properties of recoverable stretchiness, and viscoelastic properties that give it a thick-honey-like consistency, and allows it to stretch slowly and then spring back to its original shape. It retains these properties over the range of -196°C to 1000°C.

The research team, led by Dr. Ming Xu, has previously worked on “forests,” and development of the new material was the accidental product of an extension of this work. In the “forest” the long nanotubes grow upwards, but when the team modified the catalysts used in the process they found they could make the alignment of the nanotubes much less regular, and were able to create a random network of interconnected nanotubes, which Xu likened to a tangle of jungle vines.

They then investigated the properties of the new material and discovered it has similar viscoelastic properties to silicone rubber at room , but unlike rubber, which becomes brittle when cold and breaks down at high temperatures, the new material remained flexible over a much larger temperature range and has excellent fatigue resistance properties. The researchers speculated the thermal stability could arise from energy dissipating as the carbon nanotubes zip and unzip at points of contact.

Until now, very little research has been done on the viscoelastic properties of carbon nanotubes, probably because they are difficult to make and because they oxidize readily at high temperatures. Xu said the research team is now looking for industrial applications for the new material, so they can further refine its properties to suit those applications. She also said she believed the temperature range could be extended much further, and the material could probably be made more elastic, stronger or softer, as required.

The material may find uses in space applications or rubbers for use in extremely hot environments, but the research is still at an early stage. The findings on the new material are published in Science.

Explore further: Boron Nitride Nanotubes More Amenable Than Carbon

More information: Carbon Nanotubes with Temperature-Invariant Viscoelasticity from –196° to 1000°C, Ming Xu et al., Science, Vol. 330 no. 6009 pp. 1364-1368. DOI:10.1126/science.1194865

Related Stories

Boron Nitride Nanotubes More Amenable Than Carbon

May 17, 2004

Carbon nanotubes get a lot of press attention, but boron nitride (BN) nanotubes might have superior properties. K.H. Khoo and his colleagues form University of California performed first-principles calculations on BN nanotubes ...

Reinforced racquets and heated wallpaper

May 18, 2006

Extremely conductive, stronger than steel and lighter than aluminum – these are only a few of the amazing properties of carbon nanotubes. An innovative method now enables the "miracle material" to be processed on an industrial ...

Carbon Nanotube Artificial Muscles for Extreme Temperatures

March 20, 2009

(PhysOrg.com) -- Researchers at the UT Dallas Alan G. MacDiarmid NanoTech Institute have demonstrated a fundamentally new type of artificial muscle, which can operate at extreme temperatures where no other artificial muscle ...

Carbon nanotubes twice as strong as once thought

September 15, 2010

Carbon nanotubes -- those tiny particles poised to revolutionize electronics, medicine, and other areas — are much bigger in the strength department than anyone ever thought, scientists are reporting.

Recommended for you

Reshaping the solar spectrum to turn light to electricity

July 28, 2015

When it comes to installing solar cells, labor cost and the cost of the land to house them constitute the bulk of the expense. The solar cells—made often of silicon or cadmium telluride—rarely cost more than 20 percent ...

Could stronger, tougher paper replace metal?

July 24, 2015

Researchers at the University of Maryland recently discovered that paper made of cellulose fibers is tougher and stronger the smaller the fibers get. For a long time, engineers have sought a material that is both strong (resistant ...

Changing the color of light

July 23, 2015

Researchers at the University of Delaware have received a $1 million grant from the W.M. Keck Foundation to explore a new idea that could improve solar cells, medical imaging and even cancer treatments. Simply put, they want ...

Wafer-thin material heralds future of wearable technology

July 27, 2015

UOW's Institute for Superconducting and Electronic Materials (ISEM) has successfully pioneered a way to construct a flexible, foldable and lightweight energy storage device that provides the building blocks for next-generation ...

6 comments

Adjust slider to filter visible comments by rank

Display comments: newest first

Simon_Dufour
not rated yet Dec 06, 2010
I discussed that with my father and we had trouble explaining how it could become viscous and then take its shape back. Every article I read on the discovery was pretty confusing to me.
El_Nose
not rated yet Dec 06, 2010
also confused as to how a 355 degree range to a 1200 degree range is a fivefold increase to me it seems like this would be less than 4x increase -- am i misinterpreting things again??
jscroft
1 / 5 (1) Dec 06, 2010
Wow, that's going to be one expensive condom.
Skepticus
1 / 5 (1) Dec 06, 2010
It could have been incorporated into the O-rings on the solid fuel rocket boosters and saved the Chalenger.
Graeme
not rated yet Dec 08, 2010
Do Nanotubes burn at 1000 C? it sounds very likely. But if they are coated to resist oxygen they could replace cloth as well as rubber and sealants.
Quantum_Conundrum
1 / 5 (1) Dec 08, 2010
This could prove useful in any attempts at a manned mission to Europa or Enceladus, as the minimum range is just within the specifications it would need for Europa's extreme cold, and perhaps borderline for the temperatures on Enceladus (stay away from the "cold" side of the moon....)

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.