Molecular beam epitaxy facility to design custom materials for scientists

Dec 08, 2010 By Louise Lerner
This scanning transmission electron microscope image shows the cross section of a SrMnO3/LaMnO3 superlattice with atomically sharp interfaces, synthesized by molecular beam epitaxy at Argonne's Center for Nanoscale Materials. The layers with brighter contrast are the LaMnO3 layers, and the darker layers are the SrMnO3 layers. This superlattice has very different properties than an alloy La1-xSrxMnO3 film of the same overall composition. Image courtesy Jim Zuo and Amish Shah, University of Illinois at Urbana-Champaign.

The instrument used for molecular beam epitaxy (MBE) looks a little like the lunar module, with spindly metal legs feeding into a large cylindrical canister. But this device isn't headed for the moon -- it delves into molecules instead, helping scientists craft new materials layer by layer with nearly atomic precision.

The MBE facility, located at the U.S. Department of Energy's (DOE) Argonne National Laboratory, could provide the basis for to improve fuel cells, electronics and batteries.

"This is the dawn of a new era of materials discovery and synthesis," said Anand Bhattacharya, an Argonne physicist who designed the instrument. "In the right hands, it can really change . In principle, the materials we might be able to make are limited only by our imagination."

Based at Argonne's Center for , the instrument recently became available to scientists around the world who submit proposals for time on the machine. Tiffany Santos, an Argonne scientist who heads the user science activities, says the dozen studies in progress so far have examined everything from to superconductivity.

For example, Santos and colleagues are working to create materials whose can be controlled with an electric field. Today's computers and other digital devices store data on hard disk drives and memory cards, components of which need to be controlled with a magnetic field. "That's slow and also wastes energy," Santos said. "When a computer is off, it needs a long bootup time when you turn it back on because its capacitors need to be charged up to restore memory."

The ultimate goal is to perfect a system of nonvolatile memory; that is, a system where the data remain stored even while the device is turned off. "We could do this by using an to control the magnets," Santos explained, "which is more local than a magnetic field, and it would also allow us to make devices smaller and more efficient.

"It would be a huge breakthrough to eliminate the magnetic field," Santos said. "That would all but eliminate boot-up time, and the device would also consume less energy—we'd eliminate the heat load from wasted energy to charge capacitors."

Creating materials that would function in new ways is why the molecular beam epitaxy instrument was designed. The machine can fashion superlattices, or layers of materials with atomically sharp interfaces. It can also create high-quality films that maintain the crystalline structure that lends materials their unique properties.

"Layering allows you to look for new properties; making sharp interfaces between the different layers allows them to influence each other in unique ways," Santos said.

The device is ringed with canisters, each containing different pure metals that can be heated to more than 2,500 degrees Fahrenheit—so hot they actually evaporate. The beam of evaporated metal atoms shoots into a central chamber under an ultra-high vacuum. There it meets beams of different metals, hits a substrate and reacts with oxygen to form a compound in perfectly structured crystalline layers. Then the scientists can repeat the process to add more layers.

Argonne's machine is also unique in its use of ozone (O3) to react with the metals, rather than pure oxygen (O2). "Ozone is more reactive, which means that it bonds more readily with the metals," Santos explained. "This leaves fewer defects in the finished compound."

Because it's such a new field, designing custom materials takes theoretical work and a little finesse, the scientists say. "Like any good cook will tell you, you can have the best-stocked pantry," said Bhattacharya, "but the best cooks will choose the simplest ingredients and come out with something that is spectacular."

Explore further: Pseudoparticles travel through photoactive material

Related Stories

New gallium nitride film method beats the heat

Feb 21, 2006

A team of Los Alamos National Laboratory scientists have developed a method for growing crystalline gallium nitride films at lower temperatures than industry standards. By eliminating the higher temperatures and harsh, reactive ...

How can we make nanoscale capacitors even smaller?

Oct 12, 2006

Researchers at UC Santa Barbara have discovered what limits our ability to reduce the size of capacitors, often the largest components in integrated circuits, down to the nanoscale. They have answered a 45-year old question: ...

Scientists find new set of multiferroic materials

Oct 20, 2009

( -- The trail to a new multiferroic started with the theories of a U.S. Department of Energy's Argonne National Laboratory scientist and ended with a multidisciplinary collaboration that created ...

Creating exotic oxide-based spintronic devices

Apr 03, 2006

Physicist Jak Tchakhalian studies what occurs in the interface of two incompatible nanomaterials made of complex oxides that are produced by laser pulses. In the process, what emerges is an extremely exotic ...

Unexpected magnetism discovered

Oct 18, 2010

Theoretical work done at the Department of Energy's Oak Ridge National Laboratory has provided a key to understanding an unexpected magnetism between two dissimilar materials.

Recommended for you

Pseudoparticles travel through photoactive material

Apr 23, 2015

Researchers of Karlsruhe Institute of Technology (KIT) have unveiled an important step in the conversion of light into storable energy: Together with scientists of the Fritz Haber Institute in Berlin and ...

From metal to insulator and back again

Apr 22, 2015

New work from Carnegie's Russell Hemley and Ivan Naumov hones in on the physics underlying the recently discovered fact that some metals stop being metallic under pressure. Their work is published in Physical Re ...

Electron spin brings order to high entropy alloys

Apr 22, 2015

Researchers from North Carolina State University have discovered that electron spin brings a previously unknown degree of order to the high entropy alloy nickel iron chromium cobalt (NiFeCrCo) - and may play ...

Expanding the reach of metallic glass

Apr 22, 2015

Metallic glass, a class of materials that offers both pliability and strength, is poised for a friendly takeover of the chemical landscape.

Electrons move like light in three-dimensional solid

Apr 22, 2015

Electrons were observed to travel in a solid at an unusually high velocity, which remained the same independent of the electron energy. This anomalous light-like behavior is found in special two-dimensional ...

Quantum model helps solve mysteries of water

Apr 20, 2015

Water is one of the most common and extensively studied substances on earth. It is vital for all known forms of life but its unique behaviour has yet to be explained in terms of the properties of individual ...

User comments : 1

Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Dec 27, 2010
Come on Physorg, some detailed links

ANL MBE photo>

Molecular Beam Epitaxy
The basics:

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.