Researchers create new high-performance fiber

Dec 03, 2010

Researchers at Northwestern University have nanoengineered a new kind of fiber that could be tougher than Kevlar.

Working in a multidisciplinary team that includes groups from other universities and the MER Corporation, Horacio Espinosa, James N. and Nancy J. Farley Professor in Manufacturing & Entrepreneurship at the McCormick School of Engineering and Applied Science, and his group have created a high performance fiber from carbon nanotubes and a polymer that is remarkably tough, strong, and resistant to failure. Using state-of-the-art in-situ electron microscopy testing methods, the group was able to test and examine the fibers at many different scales — from the nano scale up to the macro scale — which helped them understand just exactly how tiny interactions affect the material's performance. Their results were recently published in the journal .

"We want to create new-generation fibers that exhibit both superior strength and toughness," said Espinosa said. "A big issue in engineering fibers is that they are either strong or ductile — we want a fiber that is both. The fibers we fabricated show very high ductility and a very high toughness. They can absorb and dissipate large amounts of energy before failure. We also observed that the strength of the material stays very, very high, which has not been shown before. These fibers can be used for a wide variety of defense and aerospace applications."

The project is part of the Department of Defense's Multidisciplinary University Research Initiative (MURI) program, which supports research by teams of investigators that intersect more than one traditional science and engineering discipline. Espinosa and his collaborators received $7.5 million from the U.S. Army Research Office for the study of disruptive fibers, which could be used in bulletproof vests, parachutes, or composite used in vehicles, airplanes and satellites.

To create the new fiber, researchers began with carbon nanotubes —cylindrical-shaped carbon molecules, which individually have one of the highest strengths of any material in nature. When you bundle nanotubes together, however, they lose their strength — the tubes start to laterally slip between each other.

Working with the MER Corporation and using the corporation's CVD reactor, the team added a polymer to the nanotubes to bind them together, and then spun the resulting material into yarns. Then they tested the strength and failure rates of the material using in-situ SEM testing, which uses a powerful microscope to observe the deformation of materials under a scanning electron beam. This technology, which has only been available in the past few years, allows researchers to have extremely high resolution images of materials as they deform and fail and allows researchers to study materials on several different scales. They can examine individual bundles of nanotubes and the fiber as a whole.

"We learned on multiple scales how this material functions," said Tobin Filleter, a postdoctoral researcher in Espinosa's group. "We're going to need to understand how molecules function at these nanometer scales to engineer stronger and tougher fibers in the future."

The result is a material that is tougher than Kevlar — meaning it has a higher ability to absorb energy without breaking. But Kevlar is still stronger — meaning it has a higher resistance to failure. Next, researchers hope to continue to study how to engineer the interactions between carbon nanotube bundles and between the nanotubes within the bundle itself.

"Carbon nanotubes, the nanoscale building blocks of the developed yarns, are still 50 times stronger than the material we created," said Mohammad Naraghi, a postdoctoral researcher in Espinosa's group. "If we can better engineer the interactions between bundles, we can make the material stronger."

The group is currently looking at techniques — like covalently crosslinking tubes within bundles using high-energy electron radiation – to help better engineer those interactions.

Filleter and Naraghi said this work wouldn't have been possible without the interdisciplinary team that includes merging academia with industry.

"To work in an environment where we can trade information back and forth is a unique opportunity that will push the technology farther," Naraghi said. "MER has given us a unique raw material and a commercial perspective on the project. In turn, we provide the fundamental scientific understanding."

Explore further: Chemical vapor deposition used to grow atomic layer materials on top of each other

Related Stories

Carbon nanotubes twice as strong as once thought

Sep 15, 2010

Carbon nanotubes -- those tiny particles poised to revolutionize electronics, medicine, and other areas — are much bigger in the strength department than anyone ever thought, scientists are reporting.

'Nanostitching' could strengthen airplane skins, more

Mar 04, 2009

MIT engineers are using carbon nanotubes only billionths of a meter thick to stitch together aerospace materials in work that could make airplane skins and other products some 10 times stronger at a nominal ...

Carbon Nanotubes Toughen a Common Plastic

Apr 07, 2009

(PhysOrg.com) -- A research group from the Weizmann Institute of Science in Israel has discovered that adding carbon nanotubes to a widely used commercial plastic can greatly strengthen it. Their work is one ...

Rice Refining Production of Pure Nanotube Fibers

Sep 05, 2004

Rice University scientists are refining pioneering chemical production methods used to make pure carbon nanotube fibers. Research appearing in tomorrow's issue of the journal Science describes the scalable production techniques, which yield highly alig ...

Recommended for you

Making 'bucky-balls' in spin-out's sights

14 hours ago

(Phys.org) —A new Oxford spin-out firm is targeting the difficult challenge of manufacturing fullerenes, known as 'bucky-balls' because of their spherical shape, a type of carbon nanomaterial which, like ...

Polymer microparticles could help verify goods

Apr 13, 2014

Some 2 to 5 percent of all international trade involves counterfeit goods, according to a 2013 United Nations report. These illicit products—which include electronics, automotive and aircraft parts, pharmaceuticals, ...

New light on novel additive manufacturing approach

Apr 11, 2014

(Phys.org) —For nearly a century, electrophoretic deposition (EPD) has been used as a method of coating material by depositing particles of various substances onto the surfaces of various manufactured items. ...

User comments : 6

Adjust slider to filter visible comments by rank

Display comments: newest first

Parsec
not rated yet Dec 03, 2010
Space elevator anyone?
stealthc
1 / 5 (1) Dec 03, 2010
You'd still need a pretty thick cable and you'd need the structure to also be engineered with a certain amount of electrical resistance -- or else you want it to turn into an electricity generating tether if it becomes ungrounded. It would also need tolerance towards heavy temperature change -- that polymer may or may not be ideal for this type of application.
sender
1 / 5 (1) Dec 03, 2010
nanotube-aerogel polymer composites i believe were examined for such.
Raveon
not rated yet Dec 03, 2010
I don't believe the space elevator will ever work. They talk about using a flat ribbon, try connecting a ribbon instead of a string to a kite and watch what the wind does to it in just that short distance. Nice idea in theory but I think it's completely impractical.
StandingBear
1 / 5 (1) Dec 04, 2010
Nice try to rain on the space elevator parade, but this 'skeptik' won't fly. I flew many kites as a boy, and kites do in fact like to twist, however, kites are in low tension, and the complete kite is subject to wind forces in all of its length, and the string is a low strength item that often broke. Our elevator will be in tension many orders of magnitude greater and have the presented rigidity greater than a steel pole. Its bottom anchor will be atop a building thousands of feet high, above most tropospheric winds. This structure will have to be engineered as well. It will have to be defended against numerous threats, terrorists and rival nations or alliances of same; and for this reason alone, will have to be on land, not at sea as some envision. The structure will have to be on land to be on a solid foundation.
RETT
not rated yet Dec 07, 2010
What you really cannot defend an elevator against is all the orbital and other space trash, to include every item orbiting below GSO. Having watched many a steel flagpole or power pole flex under mid-strength winds, there is no possibility that a flat tether will have much resistance to twisting, no matter what tension it is under. Stick to the Moon elevator...it is reasonably possible. The Earth elevator is unlikely in this century, if ever.

More news stories

Progress in the fight against quantum dissipation

(Phys.org) —Scientists at Yale have confirmed a 50-year-old, previously untested theoretical prediction in physics and improved the energy storage time of a quantum switch by several orders of magnitude. ...