Crystal defect shown to be key to making hollow nanotubes

Apr 22, 2010 by Terry Devitt
A high resolution tranmission electron microscope image showing hollow zinc oxide nanotubes with single crystal lattice. Credit: Song Jin, University of Wisconsin-Madison

( -- Scientists have no problem making a menagerie of nanometer-sized objects -- wires, tubes, belts, and even tree-like structures. What they sometimes have been unable to do is explain precisely how those objects form in the vapor and liquid cauldrons in which they are made.

Now a team led by University of Wisconsin-Madison chemist Song Jin, writing this week (April 23, 2010) in the journal Science, shows that a simple crystal defect known as a "screw dislocation" drives the growth of hollow just a few millionths of a centimeter thick.

The finding is important because it provides new insight into the processes that guide the formation of the smallest manufactured structures, a significant challenge in nanoscience and nanotechnology. "We think that this work provides a general for controlling nanowire or nanotube growth without using metal catalysts that can be generally applicable to many materials," says Jin, a UW-Madison professor of chemistry.

Such materials and the Lilliputian structures scientists sculpt have already found broad applications in such things as electronics, solar power, battery and , and chemical and biological sensing. By further expanding the theory of how the tiny structures form, it should now be possible for scientists to develop new methods to mass produce nano-sized objects using a variety of different materials.

A low resolution transmission electron microscope image showing a hollow zinc oxide nanotube. Credit: Song Jin, University of Wisconsin-Madison

The method described by Jin and his colleagues depends on what scientists call a screw dislocation. Dislocations are fundamental to the growth and characteristics of all crystalline materials. As their name implies, these defects prompt the creation of spiral steps on an otherwise flawless crystal face. As atoms alight on the crystal surface, they form a structure strikingly similar in appearance to the spiral ramps of multistory parking structures. In earlier work, Jin and his research group showed that screw dislocations drive the growth of one-dimensional nanowire structures that looked like tiny pine trees. That, says Jin, was a critical clue to understanding the kinetics of spontaneous nanotube growth.

The key to understanding how to harness the defect to make nanostructures in a rational way, Jin explains, is knowing that as atoms collect on a surface of a dislocation spiral, strain associated with screw dislocations builds up in the tiny structures they create.

It turns out that "making the structure hollow and making it twist are two good ways of relieving such strain and stress," Jin explains. "In some cases, the large screw dislocation strain energy contained within the nanomaterial dictates that the material hollow out its center around the dislocation, thus resulting in the spontaneous formation of nanotubes."

Crystal defect shown to be key to making hollow nanotubes
A schematic illustration showing the formation of nanotubes driven by screw dislocations. Credit: Song Jin, University of Wisconsin-Madison

The phenomenon described in the new Wisconsin work differs in significant ways from traditional mechanisms of making hollow nanostructures. Scientists now use templates to "mold" nanotubes or, alternatively, a diffusion process to convert one material into another with a hollow core. Carbon nanotubes are made, essentially, by rolling up a single honeycomb-patterned layer of carbon atoms.

The phenomena described by the Wisconsin team, Jin adds, should apply to materials beyond zinc oxide: "The understanding of the formation of nanotubes will certainly help us to understand related phenomena in other materials."

Refined, the new knowledge could ultimately be turned to the large scale, low cost production of nanomaterials for a wide range of applications. Most promising, says Jin, is the area of renewable energy where large amounts of such materials can be deployed to convert sunlight to electricity, and provide new raw materials for battery electrodes and thermoelectric devices.

Explore further: Graphene and diamonds prove a slippery combination

Related Stories

NASA Nanotechnology Comes to Market

Nov 14, 2006

Finding affordable ways to make technology available to everyone is a common challenge. Now, a researcher at NASA's Goddard Space Flight Center, Greenbelt, Md. has done that with the process that creates "nanotubes."

A new process for making much-sought iron nanospheres

Feb 19, 2007

Using a process that creates bubbles as hot as the surface of the sun, chemists are reporting development of a new method for making hollow hematite (iron oxide) nanospheres. The University of Illinois at Urbana-Champaign's ...

Efficient Filters Produced from Carbon Nanotubes

Aug 12, 2004

Filters remove nano-scale germs from water, heavy hydrocarbons from petroleum Researchers at Rensselaer Polytechnic Institute and Banaras Hindu University (India) have devised a simple method to produce carbon nanotube fil ...

Recommended for you

Graphene and diamonds prove a slippery combination

19 hours ago

Scientists at the U.S. Department of Energy's Argonne National Laboratory have found a way to use tiny diamonds and graphene to give friction the slip, creating a new material combination that demonstrates ...

Artificial muscles get graphene boost

May 22, 2015

Researchers in South Korea have developed an electrode consisting of a single-atom-thick layer of carbon to help make more durable artificial muscles.

How to make continuous rolls of graphene

May 21, 2015

Graphene is a material with a host of potential applications, including in flexible light sources, solar panels that could be integrated into windows, and membranes to desalinate and purify water. But all ...

Carbon nanothreads from compressed benzene

May 20, 2015

A new carbon nanomaterial – the thinnest possible one-dimensional thread that still retains a diamond-like structure – was created by the controlled, slow compression and decompression of benzene. The ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.