Harvesting Energy from Natural Motion: Magnets, Cantilever Capture Wide Range of Frequencies

October 28, 2009 By Richard Merritt
(L-R) Assistant Professor Brian Mann, graduate student Samuel Stanton, and undergraduate student. Image: Clark McGehee

(PhysOrg.com) -- By taking advantage of the vagaries of the natural world, Duke University engineers have developed a novel approach that they believe can more efficiently harvest electricity from the motions of everyday life.

Energy harvesting is the process of converting one form of , such as motion, into another form of energy, in this case electricity. Strategies range from the development of massive wind farms to produce large amounts of electricity to using the vibrations of walking to power small .

Although motion is an abundant source of energy, only limited success has been achieved because the devices used only perform well over a narrow band of frequencies. These so-called “linear” devices can work well, for example, if the character of the motion is fairly constant, such as the cadence of a person walking. However, as researchers point out, the pace of someone walking, as with all environmental sources, changes over time and can vary widely.

“The ideal device would be one that could convert a range of vibrations instead of just a narrow band,” said Samuel Stanton, graduate student in Duke’s Pratt School of Engineering, working in the laboratory of Brian Mann, assistant professor of mechanical engineering and materials sciences. The team, which included undergraduate Clark McGehee, published the results of their latest experiments early online in .

“Nature doesn’t work in a single frequency, so we wanted to come up with a device that would work over a broad range of frequencies,” Stanton said. “By using magnets to ‘tune’ the bandwidth of the experimental device, we were able verify in the lab that this new non-linear approach can outperform conventional linear devices.”

Although the device they constructed looks deceptively simple, it was able to prove the team’s theories on a small scale. It is basically a small cantilever, several inches long and a quarter inch wide, with an end magnet that interacts with nearby magnets. The cantilever base itself is made of a piezoelectric material, which has the unique property of releasing electrical voltage when it is strained.

The key to the new approach involved placing moveable magnets of opposing poles on either side of the magnet at the end of the arm. By changing the distance of the moveable magnets, the researchers were able to “tune” the interactions of the system with its environment, and thus produce electricity over a broader spectrum of frequencies.

“These results suggest to us that this non-linear approach could harvest more of the frequencies from the same ambient vibrations,” Mann said. “More importantly, being able to capture more of the bandwidth makes it more likely that these types of devices could someday rival batteries as a portable power source.”

The range of applications for non-linear energy harvesters varies widely. For example, Mann is working on a project that would use the motion of ocean waves to power an array of sensors that would be carried inside ocean buoys.

“These non-linear systems are self-sustaining, so they are ideal for any electrical device that needs batteries and is in a location that is difficult to access,” Mann said.

For example, the motion of walking could provide enough electricity to power an implanted device, such as a pacemaker or cardiac defibrillator. On a larger scale, sensors in the environment or spacecraft could be powered by the everyday natural vibrations around them, Mann said.

Provided by Duke University (news : web)

Explore further: IMEC reports 40 microwatt from micromachined piezoelectric energy harvester

Related Stories

'Anti-noise' silences wind turbines

August 11, 2008

If wind energy converters are located anywhere near a residential area, they must never become too noisy even in high winds. Most such power units try to go easy on their neighbors' ears, but even the most careful design ...

Recommended for you

A quantum of light for materials science

December 1, 2015

Computer simulations that predict the light-induced change in the physical and chemical properties of complex systems, molecules, nanostructures and solids usually ignore the quantum nature of light. Scientists of the Max-Planck ...

Quantum dots used to convert infrared light to visible light

December 1, 2015

(Phys.org)—A team of researchers at MIT has succeeded in creating a double film coating that is able to convert infrared light at modest intensities into visible light. In their paper published in the journal Nature Photonics, ...

Test racetrack dipole magnet produces record 16 tesla field

November 30, 2015

A new world record has been broken by the CERN magnet group when their racetrack test magnet produced a 16.2 tesla (16.2T) peak field – nearly twice that produced by the current LHC dipoles and the highest ever for a dipole ...

Turbulence in bacterial cultures

November 30, 2015

Turbulent flows surround us, from complex cloud formations to rapidly flowing rivers. Populations of motile bacteria in liquid media can also exhibit patterns of collective motion that resemble turbulent flows, provided the ...


Adjust slider to filter visible comments by rank

Display comments: newest first

1 / 5 (1) Oct 29, 2009
Dont forget about electric cars wheels turning and thus recharging the batteries. Must be 0.5 % efficient.
not rated yet Oct 29, 2009
Wire-up trees ??
not rated yet Oct 29, 2009
The phenomenon is sound and interesting although not new. It has been initially discovered by NiPS laboratory in Perugia, Italy, and reported in "Nonlinear Energy Harvesting" F. Cottone; H. Vocca; L. Gammaitoni , Phys. Rev. Lett., 02/2009, Volume 102, Issue 080601, (2009).
See also: http://physicswor...ws/38102
not rated yet Oct 30, 2009
I get how the device can be tuned with those magnets, hence the broad frequency range, but how is that done automatically, so as to provide self-sustainability?

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.