University of Florida professor designs plasma-propelled flying saucer

June 11, 2008

Flying saucers may soon be more fact than mere science fiction. University of Florida mechanical and aerospace engineering associate professor Subrata Roy has submitted a patent application for a circular, spinning aircraft design reminiscent of the spaceships seen in countless Hollywood films. Roy, however, calls his design a "wingless electromagnetic air vehicle," or WEAV.

The proposed prototype is small - the aircraft will measure less than six inches across - and will be efficient enough to be powered by on-board batteries.

Roy said the design can be scaled up and theoretically should work in a much larger form. Even in miniature, though, the design has many uses.

The most obvious functions would be surveillance and navigation. The aircraft could be designed to carry a camera and light and be controlled remotely at great distances, he said.

Fittingly, Roy said his flying saucer one day could soar through atmospheres other than Earth's own. For example, the aircraft would be an ideal vehicle for the exploration of Titan, Saturn's sixth moon, which has high air density and low gravity, Roy said.

The U.S. Air Force and NASA have expressed interest in the aircraft, and the university is seeking to license the design, he said.

"This is a very novel concept, and if it's successful, it will be revolutionary," Roy said.

The vehicle will be powered by a phenomenon called magnetohydrodynamics, or the force created when a current or a magnetic field is passed through a conducting fluid. In the case of Roy's aircraft, the conducting fluid will be created by electrodes that cover each of the vehicle's surfaces and ionize the surrounding air into plasma.

The force created by passing an electrical current through this plasma pushes around the surrounding air, and that swirling air creates lift and momentum and provides stability against wind gusts. In order to maximize the area of contact between air and vehicle, Roy's design is partially hollow and continuously curved, like an electromagnetic flying bundt pan.

One of the most revolutionary aspects of Roy's use of magnetohydrodynamics is that the vehicle will have no moving parts. The lack of traditional mechanical aircraft parts, such as propellers or jet engines, should provide tremendous reliability, Roy said. Such a design also will allow the WEAV to hover and take off vertically.

Though the design is promising on paper, towering obstacles stand between the blueprint and liftoff.

No plasma-propelled aircraft has successfully taken flight on Earth. Such designs have found some success in space, where gravity and drag are minimal, but a vehicle hoping to fly within Earth's atmosphere will need at least an order of magnitude more thrust, Roy said.

Also, the power source needs to be extremely lightweight yet still produce enough power to generate the necessary plasma. Not to mention the fact that the very same plasma that will allow the aircraft to fly also will interfere with electromagnetic waves necessary for communication with the vehicle.

But Roy is confident that the unique nature of his design will allow it to clear the technological hurdles and take to the skies, and he's not deterred by the risk of failure.

"Of course the risk is huge, but so is the payoff," he said. "If successful, we will have an aircraft, a saucer and a helicopter all in one embodiment."

The propulsion system for Roy's saucer sprouts from his extensive U.S. Air Force-funded plasma actuator research, the results of which have appeared in more than 15 scholarly journals.

The production of the aircraft will be a joint project of UF's mechanical and aerospace engineering department and its electrical and computer engineering department.

Source: University of Florida

Explore further: Colombia plane crash—how can people survive deadly air disasters?

Related Stories

Growing fears of IS use of weaponised drones

November 29, 2016

The Mosul battle in Iraq has seen the Islamic State group increasingly resort to weaponised drones, which Western governments fear could lead to a new type of attack at home.

First detection of ammonia in the upper troposphere

November 30, 2016

Population is growing, climate is warming – hence, emission of ammonia (NH3) trace gas from e.g. agriculture will increase worldwide. Recently, scientists of Karlsruhe Institute of Technology (KIT) for the first time detected ...

Recommended for you

Uncovering the secrets of water and ice as materials

December 7, 2016

Water is vital to life on Earth and its importance simply can't be overstated—it's also deeply rooted within our conscience that there's something extremely special about it. Yet, from a scientific point of view, much remains ...

Blocks of ice demonstrate levitated and directed motion

December 7, 2016

Resembling the Leidenfrost effect seen in rapidly boiling water droplets, a disk of ice becomes highly mobile due to a levitating layer of water between it and the smooth surface on which it rests and melts. The otherwise ...

The case for co-decaying dark matter

December 5, 2016

(Phys.org)—There isn't as much dark matter around today as there used to be. According to one of the most popular models of dark matter, the universe contained much more dark matter early on when the temperature was hotter. ...

5 comments

Adjust slider to filter visible comments by rank

Display comments: newest first

Mercury_01
3.3 / 5 (4) Jun 11, 2008
Why not just wait a few years for the gov't to unleash a world of hellfire with thier black project weaponry. Then you can see all the flying saucers you want! yay!
Sean_W
3 / 5 (4) Jun 11, 2008
It doesn't sound like he has gotten very far. Aren't there lots of such "promising design proposals" on the books already?
NeilFarbstein
2.8 / 5 (4) Jun 12, 2008
Its' haillley's comet!
docatomic
3.3 / 5 (3) Jun 12, 2008
A lightweight ionisation power source, eh? Well - plate the ionisation chamber with 210Po then. That will provide the ionisation; a series of coils could then move the generated plasma in 'linear motor' fashion. Compact, efficient, and good for about three or four months of ionisation duration. When the 210Po expires, re-plate.
ShadowRam
3.3 / 5 (3) Jun 12, 2008
If successful?!?

How the hell do you patent something thats not successful?

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.