Bright sparks make gains towards plastic lasers of the future

May 23, 2008
Bright sparks make gains towards plastic lasers of the future
The researchers hope lasers in CD players may one day use plastic laser diodes

Imperial researchers have come one step closer to finding the 'holy grail' in the field of plastic semiconductors by demonstrating a class of material that could make electrically-driven plastic laser diodes a reality.

Conventional electrically-powered laser diodes used in everyday consumer goods like DVD players are currently based on inorganic semiconductor materials such as gallium arsenide, gallium nitride and related alloys. The term 'semiconductor' describes the material’s ability to pass an electric current, which lies somewhere between that of a metallic conductor and that of an insulator.

In the case of a laser diode, the current comprises positive and negative charges that combine inside the material and produce the initial light required to begin the lasing process. If the initial light can be forced to pass back and forth through the semiconducting material many times, in a way that amplifies its strength on each pass, then after a short time a spectrally narrow, intense and directional laser beam emerges.

The last two decades have seen tremendous developments in new organic-molecule-based semiconductors, including a special class of plastics. Many important devices based on such plastics have successfully been developed, including light emitting diodes for displays and lighting, field effect transistors for electrical circuits, and photodiodes for solar energy conversion and light detection. However, despite over a decade of worldwide research, plastic laser diodes remain the only major device type not yet demonstrated.

One of the main stumbling blocks is that, until now, it was widely considered that plastic semiconductor laser diodes would be impossible to produce because scientists had not found or developed any plastics that could sustain a large enough current whilst also supporting the efficient light emission needed to produce a laser beam.

Now a team of Imperial physicists, publishing their findings in Nature Materials in April, have done just that. The plastics studied, synthesised by the Sumitomo Chemical Company in Japan, are closely related to PFO, an archetype blue-light emitting material. By making subtle changes in the plastic's chemical structure the researchers produced a material that transports charges 200 times better than before, without compromising its ability to efficiently emit light - indeed the generation of laser light was actually improved.

Professor Donal Bradley, lead author of the new study and head of Imperial's Department of Physics said: "This study is a real breakthrough. In the past designing polymers for electronic and optoelectronic devices often involved maximising one key property in a material at a time. When people tried to develop plastic semiconductors for laser diode use, they found that optimising the material's charge transporting properties had a detrimental effect on its ability to efficiently emit light, and vice versa."

"The modifications made to the PFO structure have allowed us to convincingly overcome this perceived incompatibility and they suggest that plastic laser diodes might now be a realistic possibility", added co-author Dr Paul Stavrinou.

Low cost manufacturing and easy integration possibilities are not the only potential advantages of developing lasers based on plastics. Currently available laser diodes do not readily cover the full visible spectrum, which limits display and many spectroscopic applications, and precludes access to the full range of wavelengths supported by the standard plastics used for waveguides and optical fibres.

Professor Bradley, Dr Stavrinou and their colleagues point out that plastic laser diodes could operate across a much more substantial wavelength range spanning the near ultraviolet to the near infrared.

The Imperial College physics team, in conjunction with polymer synthesis teams at the Sumitomo Chemical Company and in collaborating university groups, now plans to explore the generality of their approach to manipulating chemical structure to target specific device requirements. They will also study electrically driven structures, paying particular attention to understanding and managing the additional optical losses that can arise from the presence of conductive electrode layers in close proximity to the light emission material.

Professor Bradley’s Nature Material’s paper can be read in full here: www.nature.com/nmat/journal/v7/n5/full/nmat2165.html

Source: Imperial College London

Explore further: To conduct, or to insulate? That is the question

Related Stories

Future biosensors could be woven into clothes

Jun 23, 2015

Commonly used health tests, such as pregnancy and blood sugar tests, involve putting a drop of fluid on a test strip, which is infused with a substance designed to detect a specific molecule.

Improving the efficiency of solar energy cells

Jun 16, 2015

University of Adelaide chemistry researchers are studying energy loss at the molecular level of new 'plastic' materials as a step towards the development of highly efficient, low-cost and flexible solar energy cells.

Predicting sediment flow in coastal vegetation

Jun 16, 2015

Seagrass, kelp beds, mangroves, and other aquatic vegetation are often considered "ecosystem engineers" for their ability to essentially create their own habitats: Aquatic leaves and reeds slow the flow of ...

3-D printing with metals achieved

Jun 10, 2015

A team of researchers from the University of Twente has found a way to 3D print structures of copper and gold, by stacking microscopically small metal droplets. These droplets are made by melting a thin ...

Recommended for you

To conduct, or to insulate? That is the question

22 hours ago

A new study has discovered mysterious behaviour of a material that acts like an insulator in certain measurements, but simultaneously acts like a conductor in others. In an insulator, electrons are largely stuck in one place, ...

How oversized atoms could help shrink

Jul 01, 2015

"Lab-on-a-chip" devices – which can carry out several laboratory functions on a single, micro-sized chip – are the result of a quiet scientific revolution over the past few years. For example, they enable ...

User comments : 2

Adjust slider to filter visible comments by rank

Display comments: newest first

Valentiinro
4 / 5 (1) May 24, 2008
So... Cheap lasers coming in across the spectrum? That sounds pretty nifty.
lengould100
3 / 5 (1) Jun 25, 2008
Should make "fiber-optic last mile" feasible. Can hope anyway.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.