Ultrafast electron microscopy reveals switchable nanochannels in materials

March 5, 2008

Microscopic fissures in a tiny crystal open and close—on command. Researchers led by Ahmed H. Zewail successfully used ultrafast electron microscopy (UEM) to observe nanoscopic structures at their “exercises”, as they report in the journal Angewandte Chemie. Such switchable nanochannels could be useful for future nanoelectronics and nanoscopic “machines”.

Zewail and his team at the California Institute of Technology (Pasadena, USA) are renowned for their work in ultrafast science and technology. Zewail received the Nobel Prize in Chemistry in 1999 for the development of ultrafast laser techniques that are capable of revealing the motions of individual atoms within a molecule during a reaction.

The most recent development to spring from Zewail’s Laboratory is ultrafast electron microscopy. This technique is a combination of a femtosecond optical system (a femtosecond equals 10-15 seconds) with a high-resolution electron microscope; the result is a new tool with extremely high resolution in time as well as in space.

Zewail and his team have now discovered that needle-shaped microcrystals of copper and the organic compound TCNQ (7,7,8,8-tetracyanoquinodimethane, C12H4N4 ), a crystalline, quasi-one-dimensional semiconductor, exhibit optomechanical phenomena that could be of use in nanoelectronic applications.

The investigation showed that these crystals stretch out to become longer (but not wider) when they are irradiated with laser pulses in the microscope. If the irradiation is switched off, they contract back to their original size. This effect was most obvious when one of these needles was broken by the shock of a short, strong laser pulse: A small crack of some ten to one hundred nanometers forms at the break. When the crystal is stretched out under irradiation, the nanoscale channel closes up; upon contraction, it reappears. The phenomenon is reversible, as confirmed by UEM.

Why do these micromaterials stretch under light? Within the crystal, the negatively charged TCNQ ions are arranged so that their central, flat, six-membered rings are piled up on top of each other in the long direction of the needle. The energy of a laser pulse excites electrons; part of this energy is transferred, resulting in uncharged TCNQ molecules. For the uncharged TCNQ, the stacked arrangement is no longer favorable, they now require more space and cause the crystal to grow longer. The degree of stretching depends on the strength of the energy absorbed.

“Our fundamental in situ UEM observations, which reveal the behavior of nanoscopic matter in space and time, opens up new areas to explore, especially in materials science, nanotechnology, and biology,” says Zewail.

Citation: Ahmed H. Zewail, Controlled Nanoscale Mechanical Phenomena Discovered with Ultrafast Electron Microscopy, Angewandte Chemie International Edition 2007, 46, No. 48, 9206–9210, doi: 10.1002/anie.200704147

Source: Wiley

Explore further: Better memory with faster lasers

Related Stories

Better memory with faster lasers

July 2, 2015

DVDs and Blu-ray disks contain so-called phase-change materials that morph from one atomic state to another after being struck with pulses of laser light, with data "recorded" in those two atomic states. Using ultrafast laser ...

Watching nanoscale fluids flow

June 27, 2014

(Phys.org) —At the nanoscale, where objects are measured in billionths of meters and events transpire in trillionths of seconds, things do not always behave as our experiences with the macro-world might lead us to expect. ...

Moving microscopic vision into another new dimension

June 29, 2011

Scientists who pioneered a revolutionary 3-D microscope technique are now describing an extension of that technology into a new dimension that promises sweeping applications in medicine, biological research, and development ...

Recommended for you

Reshaping the solar spectrum to turn light to electricity

July 28, 2015

When it comes to installing solar cells, labor cost and the cost of the land to house them constitute the bulk of the expense. The solar cells—made often of silicon or cadmium telluride—rarely cost more than 20 percent ...

Could stronger, tougher paper replace metal?

July 24, 2015

Researchers at the University of Maryland recently discovered that paper made of cellulose fibers is tougher and stronger the smaller the fibers get. For a long time, engineers have sought a material that is both strong (resistant ...

Changing the color of light

July 23, 2015

Researchers at the University of Delaware have received a $1 million grant from the W.M. Keck Foundation to explore a new idea that could improve solar cells, medical imaging and even cancer treatments. Simply put, they want ...

Wafer-thin material heralds future of wearable technology

July 27, 2015

UOW's Institute for Superconducting and Electronic Materials (ISEM) has successfully pioneered a way to construct a flexible, foldable and lightweight energy storage device that provides the building blocks for next-generation ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.