Can a laser scanner drive a car?

March 28, 2008

A car that navigates city streets without a driver – steered only by a computer? That might seem impossible to many. But researchers from Fraunhofer and the FU Berlin are presenting such an automated vehicle at this year’s Hannover Messe on April 21 through 25, 2008. Its core element is a three-dimensional laser scanner.

Can a computer steer a car through a city without a driver’s help? The ‘Spirit of Berlin’, a vehicle developed jointly by researchers at the Fraunhofer Institute for Intelligent Analysis and Information Systems IAIS in Sankt Augustin and their colleagues at the Freie Universität Berlin, proves that it is possible.

The vehicle, which will be on display at this year’s Hannover Messe, made it to the semi-finals of the ‘DARPA Urban Challenge’ competition entirely alone –without a driver or a remote control. The Urban Challenge for unmanned vehicles is organized by the Defense Advanced Research Projects Agency (DARPA), the research arm of the United States Department of Defense. In November 2007, the third edition of the event was held at the site of a former air force base in California for the first time.

One of Spirit of Berlin’s most important sensors is a rotating 3-D laser scanner that was developed at the Fraunhofer IAIS. The scanner classifies the navigable route and is able to distinguish the street from footpaths, parking lots, houses and pedestrians. “The scanner, which is fixed to the roof of the car, constantly moves laser beams back and forth through a mirror on a vertical axis – it moves the laser beam from top to bottom and back again,” explains IAIS project manager Dr. Hartmut Surmann. “If anything gets in the way, such as a pedestrian, the laser beam is reflected and sent back to the scanner. The software analyzes the information while the car is in motion and steers the vehicle in the right direction. The system comprises two back-to-back laser scanners that rotate in the same way as the flashing lights on police cars and are thus able to ‘see’ all of the car’s surroundings.” The lasers can record two complete images per second. One of the challenges involved is to keep adjusting the recorded values to allow for the distance covered. “At a speed of 36 kilometers per hour, the car moves 10 meters per second. Consequently, the measured data must constantly be adjusted to the car’s current position,” Surmann explains.

Does the new automated vehicle mean that the driver’s license will one day become a thing of the past, and that people can sit back and enjoy the ride without taking notice of traffic? “That’s quite unlikely,” Surman says. “At a price of 17,800 euros, the scanner is much too expensive for use in private vehicles, even though it is significantly cheaper than conventional models. The main purpose of taking part in this competition was to show what computers are capable of doing when they have the right sensors, such as laser scanners and cameras.”

But where are these laser scanners in use today? “Among other things, our laser scanners are applied to assess the visibility of advertising billboards,” says the scientist. The scanner determines from which perspective the billboard is visible, and whether the view is partially obscured by a tree or a streetlight. It also identifies the point from which someone driving by can see the billboard. Within seconds, the laser beam scans the entire area and delivers the desired information at an aperture angle between 120 and 180 degrees – similar to a panoramic photograph. The difference is that a picture does not provide the observer with any information on spaces and distances, but a laser scan does. “This makes it possible to determine quality criteria for the placement of a billboard, which could be reflected in the price. A billboard that can be seen in its entirety from any angle can be rented at a higher price than a board that passers-by can only see from one angle,” says Surmann.

3-D laser scanners can also be beneficial in the realm of freight transport, as they can help determine how much space a transporter has, where street lights are in the way, which bridges are too low and which tunnels are too narrow. While digital street maps do exist, they provide no information about available space. By driving the transport route beforehand in a car that is equipped with a laser scanner, it easy to create an exact model of the surroundings.

According to Surmann, the IAIS 3-D scanner’s biggest advantage is its price: The device only costs a third of what conventional 3-D scanners cost. This has made a number of new applications possible that were previously unprofitable for cost reasons.

Source: Fraunhofer-Gesellschaft

Explore further: Carnegie Mellon and Near Earth Autonomy robots and drones put on a show at Clemson

Related Stories

In a sign of broader ambitions, Facebook opens hardware lab

August 3, 2016

Facebook built its fortune on the internet, that non-physical space where people share updates and digital videos with friends. But deep inside its Silicon Valley headquarters, engineers have stocked a new lab with computerized ...

Researchers invent, patent new class of lasers

June 8, 2016

A new class of lasers developed by a team that included physics researchers at Kansas State University could help scientists measure distances to faraway targets, identify the presence of certain gases in the atmosphere and ...

A sharper focus for plasmonic lasers

July 6, 2016

Lasers have become indispensable to modern life since they were invented more than fifty years ago. The ability to generate and amplify light waves into a coherent, monochromatic and well-focused beam has yielded applications ...

Recommended for you

Inferring urban travel patterns from cellphone data

August 29, 2016

In making decisions about infrastructure development and resource allocation, city planners rely on models of how people move through their cities, on foot, in cars, and on public transportation. Those models are largely ...

How machine learning can help with voice disorders

August 29, 2016

There's no human instinct more basic than speech, and yet, for many people, talking can be taxing. 1 in 14 working-age Americans suffer from voice disorders that are often associated with abnormal vocal behaviors - some of ...

Auto, aerospace industries warm to 3D printing

August 25, 2016

New 3D printing technology unveiled this week sharply increases the size of objects that can be produced, offering new possibilities to remake manufacturing in the auto, aerospace and other major industries.

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.